• 치위생과학회지
• /
• 제22권1호
• /
• pp.57-66
• /
• 2022

Background: This study aimed to investigate the effect of selecting commercially available blending teas and applying them to bovine teeth on color change over time. Methods: After selecting healthy bovine teeth, using a cutting-disc, 105 specimens with a dimension of 5×5×3 mm were prepared, and 15 specimens were distributed to each group. Black tea was used as a positive control, water was used as a negative control, and blended tea of five types was used as an experimental group. First, pH and buffering capacity were measured with a pH meter, and tooth color was determined using a spectrophotometer before immersion in the blending tea solution and 1, 5, 7, 14, and 21 days after immersion. Thereafter, the shape change of the enamel surface was observed using a scanning electron microscope, and SPSS ver.26 was used to analyze the color change. Results: The average pH of the five blending teas in the experimental group was 3.78, and the pH of group 3 (strawberry rhubarb) was the lowest at 3.22. The pH levels of black tea and water were 5.19 and 7.30, respectively. The buffering capacity was the highest in group 3 at both pH levels of 5.5 and 7.0. The L^*a^*b^* color change according to immersion time was the largest in group 4 (rooibos yellow flower), and the amount of color change was large in black tea and group 4. As a result of observing the enamel surface of bovine teeth, changes in the surface shape were noted in all groups immersed in the experimental solution for 21 days, except for water. Conclusion: There was a significant difference between the experimental groups in terms of color change according to the immersion time, and color and enamel surface changes were observed in black tea and all experimental groups, except for water.

• 한국CDE학회논문집
• /
• 제16권4호
• /
• pp.249-259
• /
• 2011

In this paper we present our work on the parameterized construction of virtual drivers' reach motion to seat belt, by using motion capture data. A user can generate a new reach motion by controlling a number of parameters. We approach the problem by using multiple sets of example reach motions and learning the relation between the labeling parameters and the motion data. The work is composed of three tasks. First, we construct a motion database using multiple sets of labeled motion clips obtained by using a motion capture device. This involves removing the redundancy of each motion clip by using PCA (Principal Component Analysis), and establishing temporal correspondence among different motion clips by automatic segmentation and piecewise time warping of each clip. Next, we compute motion blending functions by learning the relation between labeling parameters (age, hip base point (HBP), and height) and the motion parameters as represented by a set of PC coefficients. During runtime, on-line motion synthesis is accomplished by evaluating the motion blending function from the user-supplied control parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.94.2-94
• /
• 2002

$\textbullet$ The method to have real-time response at the motion control. $\textbullet$ The trajectory generation method guarantees the continuous acceleration in changing the velocity during the actuator is moving. $\textbullet$ We propose the velocity profile generation algorithm in order to change object position or object velocity with continuous acceleration using blending method.

• 한국해양학회지:바다
• /
• 제6권1호
• /
• pp.1-12
• /
• 2001

Topex/Poseidon(T/P)고도계 자료를 조석 수치 모델에 혼합하여 북동 아시아 해역의 $M_2,\;S_2,\; K_1$, 및 $O_1$ 분조를 $5'{\times}5'$ 분해능으로 계산하여, 북동 아시아의 조석을 산정하였다. Blending 방법에 사용되는 가중 인자 값에 대한 모델반응을 검토하기 위해 $M_2$ 분조만을 고려한 수치 실험이 수행되었으며, 수치 실험을 통해 T/P 자료를 정확히 재현하되 혼합함으로써 발생하는 잡음을 줄이기 위해 가중 인자 값은 수심의 평방근에 반비례하도록 설정하였다. T/P자료에서 구한 $M_2,\;S_2,\; K_1$, 및 $O_1$ 분조를 동시에 혼합한 수치 모델 결과는 연구 해역 내의 모든 T/P궤도 자료와 비교되었다. 진폭 오차와 지각 오차의 평균은 거의 0으로 나타났다. 진폭 오차의 표준 편차는 2 cm 내외였으며, 지각오차의 표준 편차는 $10^{\circ}$보다 작았다. T/P자료를 혼합한 모델 결과는 특히 얕은 수심(h<250m)의 T/P 궤도 자료와 거의 일치하는 것으로 나타났다. 그러나 T/P 자료만으로부터 계산된 진폭과 지각은 깊은 수심 해역에 대해서는 불합리한 공간 변화를 보이는 반면, 이들 자료를 동화시킨 모델 결과는 T/P 자료와는 차이를 보이나 합리적인 진폭과 지각의 공간 분포를 보였다. 한편 T/P자료를 혼합한 모델 결과는 자료 동화에 사용하지 않은 연안 관측 자료와도 비교적 잘 일치하였다.

• 사물인터넷융복합논문지
• /
• 제9권2호
• /
• pp.33-40
• /
• 2023

본 연구는 간호대학생을 대상으로 아로마 블렌딩 오일 흡입이 학업스트레스와 수업집중력에 미치는 효과를 검정하기 위한 비동등성 플라시보 대조군 전후 시차설계의 유사실험연구이다. 연구의 대상자는 Y시에 소재하는 K대학교 간호학과 2학년 학생으로 처치군 24명, 플라시보 대조군 24명이었다. 2022년 11월 4일부터 2022년 12월 3일까지 자료를 수집하였고, 자료는 SPSS 23.0 Program을 이용하여 분석하였다. 동질성 검정은 chi-square test, independent t-test, 실험 후 집단 간 종속변수의 차이는 independent t-test, 집단 내 종속변수의 차이는 paired t-test로 분석하였다. 10일간 아로마 블렌딩 오일을 흡입한 처치군은 호호바 오일을 흡입한 플라시보 대조군보다 학업스트레스는 유의하게 감소하였고(t=-8.79, p<.001), 수업집중력 유의하게 증가하였다(t=24.44, p<.001).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.157-158
• /
• 2007

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.301-308
• /
• 2005

In this study, we implement a framework that directly links a general tensor-based shell finite element to NURBS geometric modeling. Generally, in CAD system the surfaces are represented by B-splines or non-uniform rational B-spline(NURBS) blending functions and control points. Here, NURBS blending functions are composed by two parameters defined in local region. A general tensor-based shell element also has a two-parameter representation in the surfaces, and all the computations of geometric quantities can be performed in local surface patch. Naturally, B-spline surface or NURBS function could be directly linked to the shell analysis routine. In our study, we use NLib(NURBS libraray) to generate NURBS for shell finite analysis. The NURBS can be easily generated by interpolating or approximating given set of data points through NLib.

• 대한산업공학회지
• /
• 제20권2호
• /
• pp.77-90
• /
• 1994

Curve-net interpolation surface is one of the most popular method in engineering design. Therefore it is supported with many commercial CAD/CAM system. However, construction algorithm of curve-net interpolation surfaces is rarely opened to the public because of its copy-right. In this paper we establish a construction algorithm of curve-net interpolation surface so called sweeping surface which especially concentrates on trajectory of cross-section curve. We also show the method which can construct sweeping surfaces as NURB or Bezier mathematical models. Surfaces having the form of standard mathematical models are very useful for the application of joining, trimming, blending etc. The proposed surface interpolation scheme consists of four steps; (1) preparation of guide curves and section curves, (2) remeshing guide curves and section curves, (3) blending section curves after deformation, and (4) determination of control points for sweeping surface using gordon method. The proposed method guarantee $G^1$-continuety, and construct the surface salifying given section curves and trajectory of section curves.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.279-280
• /
• 2018

The waterproofing material can be roughly divided into a coating material and a sheet waterproofing material. In the case of coating waterproofing materials, sheet waterproofing materials, which are easy to use in terms of workability and quality control, have been recently used because of their incomplete use of coating thickness, long curing time and poor blending due to in situ blending. However, in the case of the sheet waterproofing material, since the sheet overlapping portion is inevitably generated, various defects (breakage due to the behavior) are frequently observed. Therefore, it is imperative to establish fundamental measures to minimize this.

• Elastomers and Composites
• /
• 제9권1호
• /
• pp.5-13
• /
• 1974

The characteristics of IR and IR blended elastomers, for footwear by means of blending with NR and SBR, have been studied. The results obtained were as follows: 1. The mastication of IR was almost not required, where as NR and SBR are necessary. Therefore mixing time was much reduced because of speedy filler feeding. 2. Disadvantage of low Mooney viscosity was covered by blending with NR and SBR, and by loading filler. Superior flow property in comparison to other polymers was worthy and valuable in providing formulas for mould flow, 3. The elongation property of green stocks and vulcanizates was shown smooth surface for extruded and calendered stocks, and facilitated fabrication processes. 4. Because of slow vulcanization, IR is required to control vulcanization time by adding proper accelerators. This property, in turn, made possible to improve the storing stability of green stocks by controlling scorch time.