• Journal of the Korean Geotechnical Society
• /
• v.16 no.5
• /
• pp.129-140
• /
• 2000

최근들어 핵폐기물 지하처분장을 중심으로 터널굴착에 의한 주변 암반의 손상상태와 암반특성의 변화를 정량적으로 평가하기 위한 시도가 이루어지고 있다. 이는 암반의 지지력을 적극적으로 이용하는 NATM개념에 의해 터널을 시공할 셩우 안정성 해석과 최적 보강설계를 위해 필수적인 사항으로 고려된다. 그러나 현재까지 암반 손상영역을 평가하기 위해 제시된 여러 방법들은 아직까지 그 적용성과 타당성이 충분히 검증되지 못한 실정이다. 이 연구에서는 코어시추, 실험실시험, 발파진동측정, 보어홀 카메라 등의 여러 방법에 의해 손상영역을 정량적으로 평가하고자 하였으며 가 방법의 적용성을 검토하였다. 암반상태 및 발파조건을 달리하여 시험발파를 수행하였으며 발파 후에 터널벽면에 수직하게 시추를 하여 암석코어를 채취한 뒤 손상정도에 따른 암석의 물리적, 역학적 특성들？ 변화를 정량적으로 나타내고자 하였다. 코어 채취후 시축공에 보어홀 카메라를 사용하여 손상영역을 시각적으로 판별하고자 하였으며 발파진동 측정결과로부터 손상영역을 예측하고 채취한 암석시표에 대한 실험실시험 결과와 비교하여 적용성을 검토하였다.

• Explosives and Blasting
• /
• v.19 no.2
• /
• pp.19-26
• /
• 2001

국토의 효율적 활용을 위한 각종 토목.건설공사나 석재 및 골재생산 등을 위해 암반을 굴착함에 있어 다양한 산업용 화약류가 이용되고 있다. 그러나 화약의 사용으로 인해 수반되는 발파진동은 인체 및 구조물 등에 피해를 발생시켜 인근의 주민과 마찰을 일으키고 있다.본 연구에서는 발파진동속도 data를 취합하여 분석 사용함에 있어서 V, T, L 성분의 최대 실벡터합을 사용하는 경우와 최대 벡터합을 사용하는 경우를 비교하여 실제 현장 기험시 적용성을 높이고자 하였다. 진동속도는 최대 실 벡터합에 비해 최대 벡터합에 의해 구해진 진동속도의 크기가 장승근에서는 24.6%, 삼승근에서는 26.1%가 증가하는 것으로 나타났으며, 단일성분의 최대치, 최대 실벡터합, 최대 벡터합의 안전율은 1 : 1.154 : 1.359로 나타났다

• Explosives and Blasting
• /
• v.18 no.4
• /
• pp.19-28
• /
• 2000

건설공사장 소음·진동 문제는 공사규모의 확대 및 대형중기의 사용으로 인하여 피해가 확대되고 있다. 특히 최근에 도심지 공사의 빈도가 증가하면서 대부분의 경우 인근 주민에게 피해를 줄 수 있는 법적 기준을 초과하고 있고, 소음에 노출된 주민들의 의식 변화로 많은 민원이 야기되고 있으나 현행 국내의 건설소음 진동 규제기준이 대상지역별, 시간대별로 전체적인 레벨만을 제시하고 있어 효율적인 대책수립이 어려운 실정이다. 또한 토목공사의 경우 공사현장과 가축양가 사이에 분쟁이 발생되고 있으나 인과관계의 성립여부, 피해규모, 피해액 산정, 향후조처 등에 대한 명확한 기준과 처리 사례가 국내외를 막론하고 극소수에 분과하여 분쟁의 조정이나 대책수립에 많은 어려움이 있다. 따라서 본 논문에서는 소음진동에 관련된 법적인 기준이나 각종 물적 피해에 대한 판정기준을 설명하고 당사 현장에서 발생한 민원에 관련된 사례를 소개함으로서 현행법의 문제점과 원활한 공사진행을 위한 민원에 대한 의식을 높임으로서 공사초기에 적극적으로 대처하게 하여 원만한 공사진행에 도움이 되고자 한다.

• Explosives and Blasting
• /
• v.9 no.1
• /
• pp.3-13
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ${\phi}70mm$ on the calcalious sand stone (soft -modelate -semi hard Rock). The total numbers of test blast were 88. Scale distance were induced 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ were V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum charge per delay-period of eight milliseconds or more (kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents where the quantity $\frac{D}{W^b}$ is known as the scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagorized in three groups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge Per delay Plots of peak particle velocity versus distoance were made on log-log coordinates. The data are grouped by test and P.P.V. The linear grouping of the data permits their representation by an equation of the form ; $V=K(\frac{D}{W^{\frac{1}{3}})^{-n}$ The value of K(41 or 124) and n(1.41 or 1.66) were determined for each set of data by the method of least squores. Statistical tests showed that a common slope, n, could be used for all data of a given components. Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m ------- under l00m ${\cdots\cdots\cdots}{\;}41(D/sqrt[2]{W})^{-1.41}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}A$ Over 100m ${\cdots\cdots\cdots\cdots\cdots}{\;}121(D/sqrt[3]{W})^{-1.66}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}B$ where ; V is peak particle velocity In cm / sec D is distance in m and W, maximLlm charge weight per day in kg K value on the above equation has to be more specified for further understaring about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Explosives and Blasting
• /
• v.30 no.1
• /
• pp.9-16
• /
• 2012

With the deterioration and functional loss of structures, there is an increasing demand for demolition and various demolition technologies have been developed. In case of a large-scale concrete foundation, application of some mechanical demolition techniques is limited because of the structural characteristics, and explosive demolition or explosive demolition combined with mechanical demolition is applied recently due to the effect to the surrounding environment by the ground vibration. In this study, we compared peak particle velocity of ground vibration depending on average fragment size in case of explosive demolition design for large-scale concrete foundation using the relation among specific charge, charge constant and transmitting medium constant as well as the relation between average concrete fragment size and specific charge.

• Explosives and Blasting
• /
• v.27 no.1
• /
• pp.7-20
• /
• 2009

In this study, 5 steps of different delay intervals are applied to a plasma rock-breaking machine that is driven by electric shocks in order to improve the workability of the traditional single-shot type plasma rock-breaking operation. The sequential steps use the electrolyte volume per delay of 1, 2, 3, 4, 5 kg and it has been analyzed to measure the delay time and level of the ground vibration and noise according to exploding. The delay time of the rock-breaking machine by an electric shock of 5 steps has used about 40~50ms at the electrolyte connected from 1 to 3 holes, about 70~80ms at the electrolyte connected from 4 to 5 holes. It is identified that the extents of the ground vibration is low to 1 over 3~6 compared with that of the emulsion explosives.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.69-78
• /
• 2009

Since the blast vibration induced by explosives of the powder possibly provide damage of the nearby structures adjacent to the tunnel, the stability of the nearby structures should be estimated. In this study, the stability of the tunnel based on the allowable peak particle velocity of the structures as well as allowable stress of the structures presented in the concrete structural design standard was estimated with respect to the stress of the concrete lining and axial force of the rockbolt during the blasting operation at the ground surface of the pre-existing tunnel. The analyses were carried out by using $FLAC^{2D}$ which is one of the programs developed based on the finite difference method. The bending compressive stress and shear stress of the concrete lining and axial force of the rockbolt were rapidly increased when the blasting operation was conducted near the tunnel.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.479-484
• /
• 2005

The test blasts were carried out by detonating some single blastholes at two upper sites of the underground storage cavern the crude oil. One was performed at the entrance site of the construction tunnel and the other at the middle part of the underground storage cavern. Based on the blast-induced vibration measured by the test blasts, we suggested the propagation equations of blasting vibration that were capable of estimating the peak particle velocity. In addition, in order to assess the stability of the nearest ground storage tank, we did the frequency analysis and the response spectrum analysis with the particle velocity-time history and the particle acceleration-time history that were measured by the test blast carried out on the entrance site of the construction tunnel. In result, it was predicted that the displacement on the highest part of the tank shell was less than the allowable displacement.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.263-271
• /
• 2001

Blast-vibration tests were carried out to determine the effects of the number of free face on the level of blast vibration. Frequency chatacteristics were also examined by using FFT analysis. To check the effects of the number of free face, charge weight per delay, drilling length, burden and space were applied uniformly and the number of free face was only changed from one to four. The results from tests were checked by regression analysis and K-value.

• Structural Engineering and Mechanics
• /
• v.54 no.3
• /
• pp.545-560
• /
• 2015

In this paper, blast-induced vibration effects on buildings located in rural areas were investigated. Damages to reinforced concrete, adobe and masonry buildings were evaluated in Çatakk$\ddot{o}pr\ddot{u}$ and Susuz villages in Silvan district of Diyarbakir, Turkey. Blasting of stiff rocks to construct highway at vicinity of the villages damaged the buildings seriously. The most important reason of the damages is lack of engineering services and improper constructed buildings according to the current building design codes. Also, it is determined that, inappropriate blast method and soft soil class increased the damages to the buildings. The study focuses on four points: Blast effect on buildings, soil conditions in villages, building damages and evaluation of damage reasons according to the current Turkish Earthquake Code (TEC).