• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.269-282
• /
• 2009

Responding to the threat of terrorist attacks around the world, numerous studies have been conducted to search for new methods of vulnerability assessment and protective technologies for critical infrastructure under extreme bomb blasts or high velocity impacts. In this paper, a two-dimensional behavioral rate dependent lattice model (RDLM) capable of analyzing reinforced concrete members subjected to blast and impact loading is presented. The model inherently takes into account several major influencing factors: the progressive cracking of concrete in tension, the inelastic response in compression, the yielding of reinforcing steel, and strain rate sensitivity of both concrete and steel. A computer code using the explicit algorithm was developed based on the proposed lattice model. The explicit code along with the proposed numerical model was validated using experimental test results from the Woomera blast trial.

• 한국지반신소재학회논문집
• /
• 제18권1호
• /
• pp.67-77
• /
• 2019

그라우팅 공법은 연약지반의 보강과 방수 및 지하수위저하 또는 상승과 진동으로 인한 침하 및 부등침하로 손상된 구조물의 지지력을 높이고 차수를 목적으로 하는데 사용된다. 본 연구는 아라미드 섬유를 이용하여 그라우트재료의 압축강도를 향상시키고, 고로슬래그 미분말을 이용하여 높은 강도의 지반개량공법을 개발하는데 있다. 따라서 본 연구에서는 시멘트와 고로슬래그미 분말의 비는 100:0, 70:30, 40:60%로 고치환(50%이상)까지 확인하고, 아라미드 혼입률은 시멘트와 고로슬래그 중량의 0, 0.5, 1.0%로 증가시켜 첨가하였으며, 표면의 유제처리 비율을 0.7과 1.2%로 샌드겔을 성형하여 일축압축시험을 수행하였다. 환경성 평가는 중금속용출시험과 pH 측정을 수행하였다. 실험결과 아라미드 섬유 1%첨가 시 일축압축강도는 약 1.3배 정도 강도가 증가하였고, 6가크롬은 고로슬래그 미분말이 30% 증가할수록 중금속 용출은 약 50% 감소하였으나, pH용출시험결과, 고로슬래그 미분말이 30% 증가할수록 pH는 약 0.5 증가하는 경향을 나타났다. 향후 pH에 대한 부분은 보완이 필요할 것으로 판단된다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.220-223
• /
• 2008

A test facility to measure the performance of a KM(Kick Motor) is constructed, and prediction of blast wave propagation over the facility is performed to check if the safety of test personnel in MCC(Main Control Center) can be guaranteed even for the most severe explosion. Assuming that the initial explosion energy is contained in a sphere under the pressure of 500, 1000, 1500 psi, respectively, the radius of the sphere is determined for each pressure to set the mass of contained explosion gas to 35 kg. The material properties of explosion gas are set to be the ones of KM propellant combustion gas under normal condition. To reduce the effort and time required for a complex three-dimensional modeling, the flowfield is approximated to axismmetry. Calculations are performed for all three initial pressure conditions, and the analysis of the result is given for 1500 psi which is expected to be the worst case. The maximum pressure is 3.5 psig while the minimum pressure is -1.2 psig on the outer wall of MCC, and the maximum pressure difference between the inner and outer walls of protection wall amounts to 3.0 psi.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.169-170
• /
• 2017

Recently in the construction industry there has been an increasing use of increasing replacement of cement with blast furnace slag cement(BS), an industrial by-product, to reduce environment load and production costs, and other increasing uses of BS cement. However in the case of BS being delivered in RMC factories, only score reports submitted when the are delivered are relied upon and ways to test the quality of fineness is inadequate. Therefore this study gave many changes to various cements and BS fineness to test the variations of BS as a cement, then used the correlation between this and the density value in the Hydrometer method to test the possibility for rapid appraisal of quality fineness of BS cement. Results showed that if the one fifth graph of the density and fineness correlation were to be used, a rapid appraisal of BS cement fineness quality would be possible.

• 대한건축학회논문집:구조계
• /
• 제34권8호
• /
• pp.3-11
• /
• 2018

In this study, total nine R/C beams, designed by the PVA Fiber with ground granulated blast furnace slag and recycled fine aggregate were constructed and tested under monotonic loading. In the material development, micromechanics was adopted to properly select the optimized range of the composite based on steady-state cracking theory and experimental studies on the matrix and interracial properties. Experimental programs were carried out to improve and evaluate the structural performance of the test specimens: the load-displacement, the failure mode, the maximum strength, and ductility capacity were assessed. Test results showed that test specimens (BSPR-20, 40) was increased the maximum load carrying capacity by 3~6% and the ductility capacity by 9~14% in comparison with the standard specimen (BSS). And the specimens (BSPR-60, 80, 100) was decreased the maximum load carrying capacity by 0~4% and the ductility capacity by 79% in comparison with the standard specimen (BSS) respectively.

• 대한건축학회논문집:구조계
• /
• 제34권5호
• /
• pp.13-18
• /
• 2018

In this research, regarding the type three blast furnace slag (BS) regulated by KS F 2563 and supplied to actual ready mixed concrete plant, the fineness on specification and actually measured fineness by Blain test were compared, and by applying the hydrometer method used for early prediction of concrete strength, the feasibility of the hydrometer method for acquisition inspection of BS was analyzed. Additionally, the influence of various fineness of BS on properties of cement mortar was also assessed. According to the experimental results of this research, correlation of fineness values between specification and actually measured data were not matched. In the case of the rapid evaluation method using hydrometer, a good relation was shown between the fineness data obtained from hydrometer and Blain test. furthermore, from the cement mortar properties test, there was a good relation was obtained between fineness data from rapid evaluation method by hydrometer and cement mortar properties, while there was no clear relation between fineness data from specification and cement mortar properties. Hence, as a qulity controlling method of BS fineness, a rapid evaluation method using hydrometer is suggested as a new method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.67-71
• /
• 2008

Blast Furnace slag a pigiron waste that is produced more than 800 thousand tons per year, and micronized double quenching blast furnace slag improves flexibility of concrete, and even shows improvement effect of long-term intensity. However, the concrete that used micronized double quenching blast furnace slag is restricted in its use because of many problems to assure early intensity. Even micronized blast furnace slag can assure its early intensity of concrete when maximizing, and is considered that can be applied in high strength of blast furnace slag as an alternation material for Silica-fume that depends on overall import. Hereby this paper is revised activity index and fluidity of mortar that used Nano Slag that is produced by rotten Nano crush equipment to propose its size, and possible utility of Nano Slag that was produced by blast furnace slag made in Korea as an alternation material, with the conclusion as following. 1. To measure micronized Nano slag, it is judged that it should be in progress with BET method that is based on micronized Silica-fume for concrete. 2. As a result, the test based on KS L ISO 679 is shown to satisfy the basic additive size of KS F 2563 and of KS F 2567, and to determine new combination of stipulations. 3. The strength development of Nano Slag was shown excellent in the daily initial installment of 1, 3, 7 days against the basic additive. This is judged that contains CaO controlling initial strength against Silica-fume, and contributes to higher fineness than the basic blast furnace slag 1 type.

• The Plant Pathology Journal
• /
• 제37권2호
• /
• pp.200-203
• /
• 2021

Rice blast caused by the filamentous fungus Magnaporthe oryzae, is arguably the most devastating rice disease worldwide. Development of a high-throughput and reliable field blast resistance evaluation system is essential for resistant germplasm screening, resistance genes identification and resistant varieties breeding. However, the occurrence of rice blast in paddy field is easily affected by various factors, particularly lack of sufficient inoculum, which always leads to the non-uniform occurrence and reduced disease severity. Here, we described a procedure for adequately inducing the occurrence of rice seedling blast in paddy field, which involves pretreatment of diseased straw, initiation of seedling blast for the first batch of spreader population, inducing the occurrence of the second batch of spreader population and test materials. This procedure enables uniform and consistent infection, which facilitates efficient and accurate assessment of seedling blast resistance for diverse rice materials.

• 한국건축시공학회지
• /
• 제3권3호
• /
• pp.73-81
• /
• 2003

In this paper, salt damage resistance of high durable concrete was tested. High durable concrete was made by using low water cement ratio, chemical admixture called super-durable admixture and mineral admixtures such as fly-ash, ground granulated blast-furnace slag, silica fume. Two kinds of salt damage resistance test were carried out. One method is chloride ion penetration test(ASTM C1202), and the other one is depth of chloride penetration test in saline solution. Test results were as followers: 1) The depth of chloride ion penetration increased exponentially as water cement ratio was increased and time passed. 2) Super-durable admixture had little effect on the improvement of salt damage resistance of concrete. 3) Silica fume and ground granulated blast-furnace slag were effective on salt damage resistance because of pozzolanic reaction, but fly-ash had a little effect.

• 화약ㆍ발파
• /
• 제33권1호
• /
• pp.1-12
• /
• 2015

본 연구에서는 국내 77개소의 벤치발파 현장을 조사하여 암석의 종류 및 산업별로 발파계수 C값을 설정하였고, 대표적인 산업용 화약류에 대한 실험데이터와 화약류 제조사의 데이터를 이용하여 폭약위력계수 e값을 설정하였다. 그 결과로 발파계수 C값은 화강암 등 대표적으로 조사한 암석 5종에 대한 평균적인 값의 범위가 0.21~0.30이었다. 그리고 석산, 광업 및 건설현장의 산업별로 산출한 발파계수 C값은 각각 평균 0.22, 0.13 및 0.26이었다. 한편, 폭약위력계수 e값은 화약류의 반응에너지, 탄동구포비, 폭발속도 및 Langefors 단위 중량당 강도 등 4가지로 산출하였고, 대표적인 화약류인 일반에멀젼은 1, 고성능에멀젼은 0.9 그리고 ANFO는 1로 산출되었다.