• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.130-137
• /
• 2012

Blast walls are integral structures at the typical offshore topside module to provide safety barriers for personnel and critical equipment against any blast loading and hydrocarbon explosions. The blast wall structures are usually configured with stainless steel. It can be referred as the good mechanical properties of the stainless steel against blast load, which features the characteristics of significant energy absorption and ductility. In this study, the proposed designs of corrugated panel are examined in order to determine the best design which satisfies the design criteria. The criteria on maximum deflection and stress are used to decide the best design. The effect of inclined angle of profile on deformation characteristics of blast wall is also performed. The numerical study was performed by using NX Nastran 7.5.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.431-434
• /
• 2005

The effect of ground granulated blast furnace slag to prevent detrimental expansion due to alkali-silica reaction was investigated through the ASTM C 1260 method. This method is one of the most commonly used method because results can be obtained within 16 days. Reactive aggregate used is a metamorphic rock. The replacement ratios of portland cement by ground granulated blast furnace slag were 0, 15, 25, 35 and 55 percent, respectively. The results indicate that 35 percent replacement of portland cement by ground granulated blast furnace slag seems to be effective to reduce alkali-silica reaction expansion under this experimental conditions.

• 화약ㆍ발파
• /
• 제26권1호
• /
• pp.7-14
• /
• 2008

사일로와 같은 대단면 원통형 구조물을 전도시키기 위해서는 구조적 특성 및 사전 취약화를 위한 개구부의 조건을 고려하여 설계해야 한다. 본 연구에서는 원통형 구조물을 전도시키기 위해 구조적으로 동일한 원통형 구조물을 상용해석 프로그램인 3D AEM으로 모델링하여, 개구부의 조건으로는 개구부의 높이, 개구부의 각도, 개구부의 형태를 변수로 설정하여 이들 변수에 따른 원통형 구조물의 전도 붕괴 거동을 모사하고 분석하였다.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1389-1397
• /
• 2005

Since blast-induced vibration may cause serious problem to the rock mass as well as the nearby structures, the prediction of blast-induced nitration and the stability evaluation must be performed before blasting activities. Dynamic analysis has been increased recently in order to analyze the effect of the blast-Induced vibration. Most of the previous studies, however, were based on the continuum analysis unable to consider rock joints which significantly affect the wave propagation and attenuation characteristics. They also adopted pressure corves estimated tv theoretical or empirical equations as input detonation load, thus there were very difficult to reflect the characteristics of propagating media. In this study, therefore, we suggested a dynamic distinct element analysis technique which uses velocity waveform obtained from a test blast as an input detonation load. A distinct element program, UDEC was used to consider the effect of rock joints. In order to verify the validity of proposed method, the test blast was simulated. The predicted results from the proposed method showed a good agreement with the measured vibration data from the test blast. Through the dynamic numerical modelling on the planned road tunnel and slope, we evaluated the effect of blast-induced nitration and the stability of rock slope.

• Structural Engineering and Mechanics
• /
• 제53권5호
• /
• pp.897-919
• /
• 2015

In this study, the effects of ground shocks due to explosive loads on the dynamic response of historical masonry bridges are investigated by using the multi-point shock response spectrum method. With this purpose, different charge weights and distances from the charge center are considered for the analyses of a masonry bridge and depending on these parameters frequency-varying shock spectra are determined and applied to each support of the two-span masonry bridge. The net blast induced ground motion consists of air-induced and direct-induced ground motions. Acceleration time histories of blast induced ground motions are obtained depending on a deterministic shape function and a stationary process. Shock response spectrums determined from the ground shock time histories are simulated using BlastGM software. The results obtained from uniform and multi-point response spectrum analyses cases show that significant differences take place between the uniform and multi-point blast-induced ground motions.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권7호
• /
• pp.443-451
• /
• 2015

본 논문에서는 신호 모델링 기법을 이용하여 소총화기에서 발생하는 탄환충격파(SW, Shock Wave) 음향신호와 총성(MB, Muzzle Blast) 음향신호를 효과적으로 검출할 수 있는 알고리즘을 제안하였다. 전장에서 저격수의 위치를 탐지하기 위해서는 저격수의 소총화기에서 발생하는 탄환충격파와 총성 신호를 정확하게 검출하여 적 저격수의 방향각과 거리를 추정하는 것이 중요하다. 제안 알고리즘의 성능을 검증하기 위하여 국내 군 사격장에서 실제 소총화기 발사 실험을 진행하였고, 실험결과 제안 알고리즘은 탄환충격파 신호 검출에 있어 기존 알고리즘에 비해 최대 20% 가까운 성능향상을, 총성 신호 검출에 있어서는 약 5% 정도의 성능향상을 가져옴을 확인할 수 있었다.

• 대한조선학회논문집
• /
• 제57권2호
• /
• pp.70-79
• /
• 2020

The offshore installation units may be subjected to various accidental loads such as collision from supply vessels, impact from dropped objects, blast load from gas explosion and thermal load from fire. This paper deals with the design and strength evaluation method of the stiffened plate structures in response to a blast load caused by a gas explosion accident. It is a comprehensive review of various items used in actual project such as the size and type of the explosive loads, general design procedure/concept and analysis method. The structural analyses using simple analysis methods based on SDOF model and nonlinear finite element analysis are applied to the particular FPSO project. Also validation studies on the design guidance given by simple analysis method based on SDOF model have also considered several items such as backpressure effects, material behavior and duration time of the overpressure. A good correlation between the prediction made by simple analysis method based on SDOF model and nonlinear finite element analysis can be generally obtained up to the elastic limit.

• 한국지반신소재학회논문집
• /
• 제21권4호
• /
• pp.111-121
• /
• 2022

베트남에서 대량 발생하는 플라이애시는 누적 매립량이 약 1억톤에 이르고, 약 1억톤 정도이며, 고로슬래그 역시 약 585만톤 정도 발생하는 것으로 보고되고 있다. 이에 따라 최근 베트남에서도 플라이애시 및 고로슬래그를 재활용하기 위해 제도적으로 대응하고 있으나 아직 활발히 현장에 적용되지 못하고 있다. 이에 본 연구에서는 베트남 발생 플라이애시 5종에 대하여 기본 성능분석을 실시하였고, 베트남 발생 고로슬래그와 국내 발생 고로슬래그의 성능을 비교 평가하였다. 플라이애시와 고로슬래 그를 활용하여 지반안정재 압축강도시험, 지반혼합 고화토 일축압축강도 시험을 수행한 결과, 베트남 발생 플라이애시 및 고로슬래그를 지반안정재의 원료로 활용이 가능한 것을 확인하였다.

• 한국지진공학회논문집
• /
• 제28권2호
• /
• pp.93-101
• /
• 2024

Code-compliant seismic design should be essentially applied to realize the so-called emulative performance of precast concrete (PC) lateral force-resisting systems, and this study developed simple procedures to design precast industrial buildings with intermediate precast bearing wall systems considering both the effect of seismic and blast loads. Seismic design provisions specified in ACI 318 and ASCE 7 can be directly adopted, for which the so-called 1.5S_y condition is addressed in PC wall-to-wall and wall-to-base connections. Various coupling options were considered and addressed in the seismic design of wall-to-wall connections for the longitudinal and transverse design directions to secure optimized performance and better economic feasibility. On the other hand, two possible methods were adopted in blast analysis: 1) Equivalent static analysis (ESA) based on the simplified graphic method and 2) Incremental dynamic time-history analysis (IDTHA). The ESA is physically austere to use in practice for a typical industrial PC-bearing wall system. Still, it showed an overestimating trend in terms of the lateral deformation. The coupling action between precast wall segments appears to be inevitably required due to substantially large blast loads compared to seismic loads with increasing blast risk levels. Even with the coupled-precast shear walls, the design outcome obtained from the ESA method might not be entirely satisfactory to the drift criteria presented by the ASCE Blast Design Manual. This drawback can be overcome by addressing the IDTHA method, where all the design criteria were fully satisfied with precast shear walls' non-coupling and group-coupling strength, where each individual or grouped shear fence was designed to possess 1.5S_y for the seismic design.

• International Journal of Concrete Structures and Materials
• /
• 제1권1호
• /
• pp.19-28
• /
• 2007

A dynamic constitutive damage model for reinforced concrete (RC) structures and formulations of blast loading for contact or near-contact charges are considered and adapted from literatures. The model and the formulations are applied to the input parameters needed in commercial finite element method (FEM) codes which is validated by the laboratory blast tests of RC slabs from literature. The results indicate that the dynamic constitutive damage model based on the damage mechanics and the blast loading formulations work well. The framework on the dynamic constitutive damage model and the blast loading equations can therefore be used for the simulation of failure of bridge components in engineering applications.