• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.485-492
• /
• 2005

Since blast-induced vibration may cause serious problem to the rock mass as well as the nearby structures, the prediction of blast-induced vibration and the stability evaluation must be performed before blasting activities. Dynamic analysis has been Increased recently in order to analyze the effect of the blast-induced vibration. Most of the previous studies, however, were based on the continuum analysis unable to consider rock joints which significantly affect the wave propagation and attenuation characteristics. They also adopted pressure curves estimated by theoretical or empirical equations as input detonation load, thus there were very difficult to reflect the characteristics of propagating media. In this study, therefore, we suggested a discontinuum dynamic analysis technique which uses velocity waveform obtained from a test blast as an input detonation load. A distinct element program, UDEC was used to consider the effect of rock joints. In order to verify the validity of proposed method, the test blast was simulated. The predicted results from the proposed method showed a good agreement with the measured vibration data from the test blast Through the dynamic numerical modelling on the planned road tunnel and slope, we evaluated the effect of blast-induced vibration and the stability of rock slope.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.875-878
• /
• 2006

In the case of a vibration sensitive equipment, it require a vibration free environment to provide its proper function, therefore, it is very important to predict precisely vibration environment of microelectronics production facility due to adjacent blast work. However, it is not easy to evaluate a quantitative vibration response of structure due blast because it can be determined by the characteristics of vibration sources, propagation through rock and soil and dynamic properties of building. In this paper, vibration influence evaluation of micro-electronic Production building induced from adjacent blast activity was performed by real measurement data obtained on ground and structure at same time. And blast vibration allowable limit on ground was supposed by measurement data analysis in order to avoid operation error of precision equipments

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1389-1397
• /
• 2005

Since blast-induced vibration may cause serious problem to the rock mass as well as the nearby structures, the prediction of blast-induced nitration and the stability evaluation must be performed before blasting activities. Dynamic analysis has been increased recently in order to analyze the effect of the blast-Induced vibration. Most of the previous studies, however, were based on the continuum analysis unable to consider rock joints which significantly affect the wave propagation and attenuation characteristics. They also adopted pressure corves estimated tv theoretical or empirical equations as input detonation load, thus there were very difficult to reflect the characteristics of propagating media. In this study, therefore, we suggested a dynamic distinct element analysis technique which uses velocity waveform obtained from a test blast as an input detonation load. A distinct element program, UDEC was used to consider the effect of rock joints. In order to verify the validity of proposed method, the test blast was simulated. The predicted results from the proposed method showed a good agreement with the measured vibration data from the test blast. Through the dynamic numerical modelling on the planned road tunnel and slope, we evaluated the effect of blast-induced nitration and the stability of rock slope.

• Geomechanics and Engineering
• /
• 제15권6호
• /
• pp.1227-1236
• /
• 2018

From all of the environmental problems, blast-induced vibrations often cause concern to surrounding residents. It is often claimed that damage to building superstructures is due to blasting, and sometimes the building owner files a lawsuit against the company that perform blasting operations. The blast-vibration problem has been thoroughly investigated in the past and continues to be the subject of ongoing research. In this study, a tunnel construction has been performed by a construction company, according to their contract they must have used drilling & blasting method for excavation in tunnel inlet and outlet portal. The population is very condensed with almost tunnel below in the vicinity houses of one or two floors, typically built with stone masonry and concrete. This situation forces the company to take extreme precautions when they are designing blasts so that the blast effects, which are mainly vibration and aerial waves, do not disturb their surrounding neighbors. For this purpose, the vibration measurement and analysis have been carried out and a new methodology in minimizing the blast induced ground vibrations at the target location, was also applied. Peak particle velocity and dominant frequencies were taken into consideration in analyzing the blast-induced ground vibration. The methodology aims to employ the most suitable time delays among blast-hole groupings to render destructive interference of surface waves at the target location.

• 터널과지하공간
• /
• 제18권4호
• /
• pp.280-288
• /
• 2008

발파진동은 암반 및 인근 구조물에 심각한 문제를 야기할 수 있기 때문에 시공 전 발파진동의 예측과 안전성 평가가 반드시 선행되어야 한다. 최근 발파진동 영향평가를 위하여 시추공이나 시험발파를 통해 획득한 실측진동파형을 이용한 동적수치해석이 증가하고 있다. 하지만 시추공 발파 진동파형은 실제 발파현장에서 측정된 진동파형과 진동수준이나 진동지속시간에서 다소 차이가 있으며 이는 단일공 파형과 유사한 특성을 가진다. 따라서 본 연구에서는 단일공 파형의 중첩모델링을 통해 발파조건 변화에 따른 진동파형을 획득하고 이 파형을 이용한 동적수치해석을 수행하였다.

• 화약ㆍ발파
• /
• 제34권3호
• /
• pp.10-16
• /
• 2016

최근 석회석광산은 분진 소음 등 환경적인 문제와 함께 석회석 품위 저하 현상으로 갱내 채광이 증가하고 있다. 석회석을 파쇄시키기 위한 파쇄 시설을 갱내 설치하려면 대규모 지하공동이 필요하게 되며, 공동의 규모가 커짐에 따라 낙석이나 낙반의 발생 가능성이 높아지게 된다. 그리고 석회석 지하공동 주변 암반은 다양한 절리가 발달하여 낙석 발생에 영향을 미치는 것으로 알려져 있다. 본 연구에서는 채광 발파 시 대형갱도 내 낙석발생 여부 관찰과 발파진동 계측을 수행하여, 이를 바탕으로 불연속면 수치해석 소프트웨어인 UDEC를 이용하여 절리암반 동해석 모델을 제안하고 발파진동 여기에 의한 대형 지하갱도의 낙석 발생을 해석하였다. 또한 절리암반 모델에 다양한 절리특성(경사각, 간격)의 변화와 발파굴착 손상영역을 고려하였다.

• 화약ㆍ발파
• /
• 제23권3호
• /
• pp.1-10
• /
• 2005

구조물의 발파진동에 대한 허용 수준 설정은 구조물의 반응 특성이 발파 진동의 특성과 전파 매질인 지반의 특성, 대상 구조물의 특성, 구조물의 기초 특성 등 여러 인파에 따라 달리 나타나므로 표준화된 기준을 적용하기는 쉽지 않은 일이다. 국외의 경우 영국, 독일, 스위스, 스웨덴과 같이 국가별로 허용수준에 대한 표준을 마련한 나라들도 있으며 아직 별도로 기준을 마련하지 않은 국가들도 많다. 우리나라는 통상 적용되고 있는 기준이 있으나 아직 국가 표준화는 되어 있지 않은 상황이며 민원 해결의 근거를 위한 합리적인 기준 마련의 필요성이 대두되고 있는 실정이다. 본 논문에서는 국가적으로 기준을 갖고 있는 미국, 영국, 독일, 스위스, 스웨덴 등의 사례와 개정 작업을 하고 있는 호주 및 브라질의 사례 분석을 통하여 다양한 형태의 기준들에 대한 특징을 파악하고 현행 사용되고 있는 국내 기준의 문제점을 고찰하였다.

• Structural Engineering and Mechanics
• /
• 제54권3호
• /
• pp.545-560
• /
• 2015

In this paper, blast-induced vibration effects on buildings located in rural areas were investigated. Damages to reinforced concrete, adobe and masonry buildings were evaluated in Çatakk$\ddot{o}pr\ddot{u}$ and Susuz villages in Silvan district of Diyarbakir, Turkey. Blasting of stiff rocks to construct highway at vicinity of the villages damaged the buildings seriously. The most important reason of the damages is lack of engineering services and improper constructed buildings according to the current building design codes. Also, it is determined that, inappropriate blast method and soft soil class increased the damages to the buildings. The study focuses on four points: Blast effect on buildings, soil conditions in villages, building damages and evaluation of damage reasons according to the current Turkish Earthquake Code (TEC).

• 한국지반공학회논문집
• /
• 제23권10호
• /
• pp.33-45
• /
• 2007

본 연구에서는 발파 시 발생되는 지반진동이 인접한 터널 지보재의 안정성에 미치는 영향을 분석하고, 발파진동에 의한 터널의 역학적 안정성을 허용진동속도를 기준으로 검토하였다. 기존에 제시된 미광무국과 서울지하철에서 제시한 이론식, 그리고 수치해석 프로그램을 사용하여 허용진동속도를 초과하지 않는 발파이격거리를 산정하였고, 발파시 콘크리트 라이닝과 록볼트의 거동을 평가하였다. 콘크리트 라이닝의 구조적 안정성에 미치는 발파진동영향은 미미한 것으로 나타났으나, 록볼트에 미치는 영향은 상대적으로 크다는 것을 알 수 있었다.

• 터널과지하공간
• /
• 제16권5호
• /
• pp.377-386
• /
• 2006

본 연구에서는 기존의 시추공 시험 발파 결과를 이용한 분석뿐만 아니라, 3차원 수치 해석으로 터널 굴착 시 실제 발파와 동일한 조건을 적용한 발파진동영향 검토를 실시하고 주변 구조물에 미치는 진동 영향을 분석하여 발파패턴 설계를 수행하였다.