• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.272-277
• /
• 2000

This study is performed to evaluate the engineering properties of permeable polymer concrete with blast furnace slag and fly ash. The following conclusions are drawn; 1. The highest strength is achieved by 50% filled blast furnace slag powder and fly ash permeable polymer concrete, it is increased 36% by compressive strength, 119% by tensile strength and 217% by bending strength than that of the normal cement concrete, respectively. 2. The ultrasonic pulse velocity is in the range of 2,022 ∼ 2,139m/s. The highest pulse velocity is showed by 50% filled blast furnace slag powder and fly ash permeable polymer concrete. 3. The water permeability is in the range of 4.612∼5.913$\ell$/$\textrm{cm}^2$/h, and it is largely dependent upon the mix design.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.559-562
• /
• 2000

This study is about the compensation of early age strength on mortar and concrete admixed with blast-furnace slag powder. For study, we have used fine powder of gypsum and kiln dust from cement factory. According to the test results, we have obtained proper mixing ratio of slag powder, gypsum and kiln dust for the compensation of early age strength on mortar and concrete property.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.17-18
• /
• 2019

In this study, the initial strength reduction of coal gasification slag fine powders was confirmed through previous studies when used in cement formulations. It is also confirmed that the blast furnace slag is mixed with cementitious coal blast furnace slag, which is similar to coal gasification slag, to incorporate gypsum in order to prevent initial strength deterioration. In order to analyze the reactivity of coal gasification slag by desulfurization gypsum, the formation of hydrates and their reactivity at early ages were confirmed by electron microscope. In order to confirm the reactivity, the gypsum samples were prepared with unincorporated type and 2% mixed type. Experimental results showed that 2% of the desulfurized gypsum specimens reacted more actively than the uninjured ones.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.123-128
• /
• 2013

This study was performed to evaluate the slump flow, air content, setting time, compressive strength, adiabatic temperature rise and diffusion coefficient of chloride used ordinary portland cement, crushed coarse aggregate, crushed sand, river sand, fly ash, limestone powder, blast furnace slag powder and superplasticizer to find optimum mix design of low carbon green concrete for structures. The performances of low carbon green concrete used fly ash, limestone powder and blast furnace slag powder were remarkably improved. This fact is expected to have economical effects in the manufacture of low carbon green concrete for structures. Accordingly, the fly ash, limestone powder and blast furnace slag powder can be used for low carbon green concrete material.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.107-108
• /
• 2012

The study on the strength prediction using Maturity is mainly focused on, but the study on the concrete mixing blast furnace slag powder is insufficient. The purpose of this study is to investigate the relationships between compressive strength and equivalent age by Maturity function and is to compare and examine the strength prediction of concrete mixing Blast Furnace Slag Power using ACI and Logistic Curve prediction equation. So it is intended that fundamental data are presented for quality management and process management of concrete mixing Blast Furnace Slag Power in the construction field.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.32-33
• /
• 2016

This purpose of this study is to find the properties of pore structure and length change of blast furnace slag cement added alkali powder stimulant on shrinkage reducing agent presence. In length change, the specimen added alkaline stimulant was smaller than normal blast furnace slag concrete. And the specimen added shrinkage reduction agent was confirmed to show smaller rate of length change than the length. In MIP analysis of 1day-age, 0.1㎛ subsequent pore amount of the specimen added alkaline stimulant was significantly smaller value the normal blast furnace slag concrete specimen.

• 한국농공학회논문집
• /
• 제46권7호
• /
• pp.47-53
• /
• 2004

Permeable polymer concrete can be applied to roads, sidewalks, river embankments, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study was to explore a possibility of using blast furnace slag powder and stone dust of industrial by-products as fillers for Eco-permeable polymer concrete. Different mix proportions were tried to find an optimum mix proportion of the Eco­permeable polymer concrete. The tests were carried out at $20{\pm}1^{circ}C$ and $60{\pm}2\%$ relative humidity. At 7 days of curing, unit weight, coefficient of permeability, dynamic modulus of elasticity, compressive, flexural and splitting tensile strengths ranged between $1,821{\~}1,955 kg/m^{3}$, $0.056{\~}0.081\;cm/s$, $114{\times}0^{2}{\~}157{\times}10^{2}\;MPa,\;17.6{\~}24.7\;MPa,\;5.98{\~}7.94\;MPa\;and\;3.43{\~}4.70\;MPa$, respectively. It was concluded that the blast furnace slag powder and stone dust can be used in the Eco-permeable polymer concrete.

• 대한건축학회논문집:구조계
• /
• 제33권12호
• /
• pp.63-70
• /
• 2017

When industrial by-products like slag and fly ash are using in concrete with cement, it improves strength and durability against external deterioration factors by densifying the structure through potential hydraulic and pozzolanic reaction. But it has been pointed out that high dependence on the quality variation and the curing condition using a admixure material for concrete. In this study, the characteristics of internal micropore structure according to curing condition were analyzed for pastes and mortar specimens under using blast furnace slag powder. As a result, the variation of compressive strength and the internal microstructure were observed according to curing conditions by binder type. Particularly, using blast furnace slag powder, decrease in compressive strength were clearly observed in indoor and carbonation curing compared with water curing. The pore structure analysis also clearly observed the decrease of the gel pore existing in the CSH hydrate layer and the increase of the capillary pore in indoor and carbonation curing compared with water curing condition.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.9-14
• /
• 2022

기존의 페로니켈 슬래그에 관한 연구는 대부분 골재 및 잔골재로서의 가능성에 초점이 맞추어져 수행되었으나 본 연구는 페로니켈 슬래그 미분말의 콘크리트 혼화재로서의 가능성에 주목하여 수행하였다. Fly ash, 고로슬래그 및 FPS 등을 각각 10 %씩 혼입한 콘크리트에 대해 미국의 ASTM C 1260을 준용하여 반응성을 평가하였다. 그 결과, 대조군과 비교해 Fly ash는 8.43 %, 고로슬래그 미분말은 14.46 % 팽창률이 감소했지만, 페로니켈 슬래그 미분말은 49.40 %의 팽창률 감소세를 보였다. 골재의 반응성 억제 측면에서 충분히 Fly ash, 고로슬래그 등 기존의 혼화재를 대체할 수 있음을 확인하였으나, SEM 분석결과 수많은 에트린자이트(ettringite)가 생성되었고 이것이 콘크리트에 어떤 영향을 주는지에 대한 추가적인 연구가 필요하다.

• 한국건축시공학회지
• /
• 제17권6호
• /
• pp.527-534
• /
• 2017

본 연구에서는 순환골재 생산시 발생되는 미분말을 고로슬래그 미분말의 알칼리 자극제로 활용하기 위해 배합수에 일부 혼입하여 강알칼리성을 띄게 한 후, 고로슬래그 미분말을 단계별로 치환한 콘크리트의 물리적 특성에 미치는 영향을 종합적으로 분석하였다. 그 결과 순환골재 미분말의 침지시간이 5시간일 때 전 시험편에서 가장 높은 pH가 측정되어 알칼리 자극제로서 활용가능성이 가장 높은 침지 시간임을 확인할 수 있었으며, 순환골재 미분말을 3% 혼입시킨 시험배합수가 1% 혼입시킨 배합수에 비하여 약 15mg/l이상의 $Ca(OH)_2$을 더 함유한 것으로 나타내었다. 순환골재 미분말을 혼입시킨 배합수를 사용한 경우 일반배합수를 사용한 경우와 비교하여 전 재령에서 강도발현이 더 우수한 것으로 나타났으며, 조기재령과 장기재령 모두 순환골재 미분말의 알칼리 자극효과가 있음을 확인할 수 있었다.