• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.713-727
• /
• 2018

Thin-walled mental tubes under lateral crushing are desirable and reliable energy absorbers against impact or blast loads. However, the early formations of plastic hinges in the thin cylindrical wall limit the energy absorption performance. This study investigates the energy absorption performance of a simple, light and efficient energy absorber called the ring stiffened tube. Due to the increase of section modulus of tube wall and the restraining effect of the T-stiffener flange, key energy absorption parameters (peak crushing force, energy absorption and specific energy absorption) have been significantly improved against the empty tube. Its potential application in the offshore blast wall design has also been investigated. It is proposed to replace the blast wall endplates at the supports with the energy absorption devices that are made up of the ring stiffened tubes and springs. An analytical model based on beam vibration theory and virtual work theory, in which the boundary conditions at each support are simplified as a translational spring and a rotational spring, has been developed to evaluate the blast mitigation effect of the proposed design scheme. Finite element method has been applied to validate the analytical model. Comparisons of key design criterions such as panel deflection and energy absorption against the traditional design demonstrate the effectiveness of the proposed design in blast alleviation.

• 화약ㆍ발파
• /
• 제18권3호
• /
• pp.59-66
• /
• 2000

"Air Tube" 발파공법에 대한 연구는 기존의 일반 발파 방법의 단점을 크게 보완하여, 이 에 따른 진동, 폭음(소음), 전석 발생 등 이러한 문제점들을 해결하기 위해 고안된 것으로 기존 Air Decking 기술을 응용한 것이다. 본 연구는 폭약의 하부, 폭약과 폭약사이, 폭약의 상부와 전색 사이에 일정 길이의 "Air Tube"를 장착시켜 폭약의 투사면적을 증가시키고, 진동의 감쇠와 전석이 감소되어 특히 도심지에서 발생하는 민원의 대상이 될 수 있는 진동 및 폭음도 크게 줄일 수 있는 효과적인 발파 기술이다.일 수 있는 효과적인 발파 기술이다.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.122-128
• /
• 2004

Internal blast performance test on developed explosives was carried out. Internal blast means a blast wave in closed chambers like tunnels, bunkers, operation center and chamber of ships. We used Anpa tunnel for our test facility. We performed two series of tests to measure internal blast of developed explosives. Three different kinds of cast PBXs, DXD-09, DXD-10, DXD-18, and conventional explosive, Tritonal, were used in our test. The explosives were cast as a charge of 108mm diameter in a plastic tube of a 3mm thickness. The length of charges 4ere adjusted as a weight 3kg. A melt-cast explosive, tritonal, was used as a reference. Pentolite booster was used. The cylindrical boosters have a 95mm diameter and 47.5mm height. The results showed that there may be some differences between the performances in the air blast tests and those in the internal blast tests. The results showed that DXD-10, the best performance in air blast tests, showed the poorest performance in internal blast among the explosives tested. On the other hand, DXD-18 showed exactly the opposite trend. This is probably due to the highest contents of aluminum and inert binder in DXD-18. DXD-18 has $38\;wt\;\%$ of aluminum and $17\;wt\;\%$ of inert binders.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.91-94
• /
• 2004

A numerical analysis was made to investigate the intensity diminution of a simple silencer for high pressure blast flow fields. Reynolds-Averaged Wavier-Stokes equations were solved for an axisymmetric computational domain constructed by multi block Chimera grids. A blast flow field without the silencer was also calculated to validate the present numerical method. The evolution of high pressure blast flow fields was observed by depicting calculated contours of pressure and Mach number. It was found that the tested silencer could achieve 76 percent intensity diminution.

• Advances in materials Research
• /
• 제6권2호
• /
• pp.155-168
• /
• 2017

The terrorist attacks and dangers by bomb blast have turned into an emerging issue throughout the world and the protection of the people and structures against terrorist acts depends on the prediction of the response of structures under blast and shock load. In this paper, behavior of aluminum and unidirectionally reinforced E-Glass Epoxy composite plates with and without focal circular holes subjected to shock loading has been identified. For isotropic and orthotropic plates (with and without holes) the classical normal mode approach has been utilized as a part of the processing of theoretical results. To obtain the accurate results, convergence of the results was considered and a number of modes were selected for plate with and without hole individually. Using a shock tube as a loading device, tests have been conducted to composite plates to verify the theoretical results. Moreover, peak dynamic strains, investigated by experiments are also compared with the theoretical values and deviation of the results are discussed accordingly. The strain-time histories are likewise indicated for a specific gauge area for aluminum and composite plates. Comparison of dynamic-amplification factors between the isotropic and the orthotropic plates with and without hole has been discussed.

• 터널과지하공간
• /
• 제16권5호
• /
• pp.387-393
• /
• 2006

본 연구는 발파 시 발생하는 진동을 저감시키고 발파효율을 증진시키기 위하여 NDC(New Deck Charge) 공법 및 Wide space 공법을 혼합하여 발파를 실시한 사례연구이다. NDC 공법은 종이분리봉을 이용하여 분산장 약을 실시하는 공법으로 발파 시 진동은 저감시키나 공저부에서 발파효과가 저감되는 경향을 보인다. Wide Space 공법은 기존의 일반적인 발파공법에 비해 파쇄입도를 조절하고 발파효율을 높이는데 유리한 공법이다. 본 사례 연구에서는 두 가지 공법을 혼합하여 현장 적용성을 검토한 결과, 진동속도가 감소되고 발파효율이 증가하는 결과를 확인하였으며, 향후 다양한 조건에서 발파를 실시하여 자료를 축적한다면 민원저감 및 공기단축에 기여할 수 있는 유용한 발파패턴을 정립할 수 있을 것으로 사료된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.230-237
• /
• 2003

로켓의 신뢰성을 위해서 토출관의 접합계면을 평가하기위한 초음파 시험법을 개발하였다. 본 연구의 주된 목적은 철피와 FRP 사이의 에폭시 접합계면에서 미접착 부위와 미충전 부위를 찾아내는 것이다. 미접착부나 미충전부를 찾아내기 위해서 고주파수 초음파 펄스-에코를 이용하여 철피와 에폭시 접착제 사이의 경계면에서 반사되는 초음파 신호를 측정하였다. 결함이 있는 부위의 gap의 크기를 평가하기 위해서 저주파 초음파를 이용하여 공진이 일어나도록 철피를 가진하였다. 이러한 기법을 이용하여 양산품을 검사하기 위한 자동화 장치를 개발하였다. 검사기법을 검증하기 위해서 초음파 시험을 수행한 토출관을 절단하여 현미경으로 gap을 측정하였다.

• 대한기계학회논문집B
• /
• 제21권8호
• /
• pp.1009-1023
• /
• 1997

The breakup length of a liquid jet with flowrate, formed by releasing through a nozzle of circular cross-section into the atmosphere, was experimented and studied for 3 liquid nozzles of varying diameters. The experimental result was analyzed using the existing theoretical equation for predicting the breakup length. It was found that the breakup length of liquid jet depends on the velocity, and the breakup length increases with increasing of the liquid nozzle diameter. Also, the variation range of the breakup length for the same flowrate of liquid increased rapidly as velocity was increased for laminar flow, but in the turbulent flow region, it leveled off in the range of approximately 0.55-0.7 of the mean breakup length. Furthermore, when the longest smooth liquid jet was applied to the co-axial flow air blast atomizer, the effect of air flow on the flow pattern and breakup length was studied for 6 glass nozzles of different lengths and diameters. It was found that depending on the diameter of the mixing tube and liquid jet, it was possible to observe a wide range of flow patterns, such as liquid jet through flow, partial annular flow and annular flow. The liquid jet breakup length was more sensitive to the change in the length rather than the diameter of the mixing tube. As the length of the mixing tube shortens, the breakup length also shortens rapidly.

• 터널과지하공간
• /
• 제25권1호
• /
• pp.46-55
• /
• 2015

발파분진을 제어하기 위하여 도폭선을 결합한 양수튜브를 고안하였다. 최적설계를 위한 실험의 일환으로 도폭선 기폭위치에 따른 물의 확산을 비교 실험하였다. 실험결과를 평가하기 위하여 고속카메라로 촬영하여 영상을 이미지 분석 하였고, 워터튜브의 분무확산 과정을 묘사하기 위해 AUTODYN 프로그램을 이용하여 해석한 결과를 분무초기거동 실험영상과 비교하였다. 외부기폭의 경우 분무거동이 교차유동을 나타냈고, 내부기폭의 경우 방사형 전파유동을 나타냈다. 수치해석 결과 워터튜브 내부기폭의 경우 수중폭발에서와 같은 내부 Bubble Ring이 발생하였고, 지반에의 반사압 영향에 의해 추가적인 Bubble Ring이 형성되었다. 또한, 워터튜브의 분무미립화 성능을 Weber 수를 통해 평가하였고, 워터튜브의 충분한 미립화 성능을 확인할 수 있었다.

• 한국전산유체공학회지
• /
• 제10권4호통권31호
• /
• pp.59-65
• /
• 2005

A numerical analysis was made to investigate the simple silencer for high pressure blast flow fields. Reynolds-Averaged Navier-Stokes equations were solved for an axisymmetric computational domain constructed by multi block grids. A blast flow field without the silencer was also calculated to validate the present numerical method. The effect of pressure diminution for the silencer was calculated by comparing with and without silencer at the atmosphere region. It was found that the tested silencer could achieve 89.4 percent pressure diminution.