• 대한조선학회논문집
• /
• 제61권1호
• /
• pp.44-50
• /
• 2024

In order to reasonably predict damage extents of naval ships under in-compartment explosion (INCEX) loads, two conditions should be fulfilled in terms of accurate INCEX load generation and fracture estimation. This paper seeks to predict damage extents of various naval ships by applying the CONWEP model to generate INCEX loads, combined with the Hosford-Coulomb (HC) and localized necking (LN) fracture model. This study selected a naval ship with a 2,000-ton displacement, using associated specifications collected from references. The CONWEP model that is embedded in a commercial finite element analysis software ABAQUS/Explicit was used for INCEX load generation. The combined HC-LN model was used to simulate fracture initiation and propagation. The permanent failures with some structural fractures occurred where at the locations closest to the explosion source points in case of the near field explosions, while, some significant fractures were observed in way of the interfaces between bulkheads and curtain plates under far field explosion. A large thickness difference would lead to those interface failures. It is expected that the findings of this study enhances the vulnerability design of naval ships, enabling more accurate predictions of damage extents under INCEX loads.

• 한국압력기기공학회 논문집
• /
• 제14권2호
• /
• pp.1-10
• /
• 2018

Structures, systems and components of nuclear power plants should be able to maintain safety even in the event of design-basis accidents such as high-energy line breaks. The high-pressure steam jet ejected from the broken pipe may cause damage to the adjacent structures. The ANSI/ANS 58.2 code has been adopted as a technical standard for evaluating the jet impingement load. Recently, the U.S. NRC pointed out the non-conservativeness of the ANSI/ANS 58.2, because it does not take into account the blast wave effect, dynamic behavior of the jet, and oversimplifies the shape and load characteristics of the supersonic steam jet. Therefore, it is necessary to improve the evaluation method for the high-energy line break accident. In order to evaluate the behavior of supersonic steam jet, an appropriate numerical analysis technique considering compressible flow effect is needed. In this study, numerical analysis methodology for evaluating supersonic jet impingement load was developed and verified. In addition, the conservativeness of the ANSI/ANS 58.2 model was investigated using the numerical analysis methodology. It is estimated that the ANSI jet model does not sufficiently reflect the physical behavior of under-expanded supersonic steam jet and evaluates the jet impingement load lower than CFD analysis result at certain positions.

• 한국지반환경공학회 논문집
• /
• 제16권12호
• /
• pp.5-12
• /
• 2015

발파소음은 충격음이기 때문에 인체에 갑작스런 충격을 주며, 발파진동과 같은 경우에는 지반을 따라 진동이 이동하여 인근 주변의 노화된 건물, 가축과 인체에도 큰 피해를 끼칠 수 있다. 본 연구에서는 광산 굴착 시 발생하는 발파영향이 인근지역에 미치는 영향에 대하여 분석하였다. 연구대상 지역의 지반현황을 파악하기 위해 지질조사, 현장시험과 실내시험 등의 지반조사를 수행하였다. 발파진동소음에 대해서는 국내 외 적용사례와 각 기관별 허용기준을 비교하여 현장조건에 가장 적합한 기준을 설정하였다. 발파영향을 검토하기 위해 발파진동 추정 식은 현장에서 시험발파를 수행하여 측정된 발파진동 값을 활용하였다. 발파진동 추정 식을 활용한 영향원의 검토는 발파지점을 보안물건(농장, 민가 등)으로부터 최단거리로 정하여 보안물건에 미치는 영향을 검토하였다. 또한 3차원 수치해석을 수행하여 발파진동 영향검토를 수행하였다. 3차원 수치해석은 동적 발파하중에 대한 구조물의 거동을 해석하기 위해 시간이력해석을 수행하였으며, 3방향에 대한 발파진동 값을 구하였다. 시험발파에 따른 발파진동 추정 식을 이용한 발파진동 영향원 검토 결과와 발파영향에 대한 3차원 수치해석 값을 비교 분석한 결과, 유사한 결과 수치를 확인하였다.

• 한국터널지하공간학회 논문집
• /
• 제13권5호
• /
• pp.413-430
• /
• 2011

최근 들어, 폭발하중에 대해여 안전한 사회기반시설에 대한 관심이 증가하고 있다. 폭발하중은 가스폭발이나 폭탄 폭발에 의하여 발생된다. 본 연구에서는 가스폭발하중을 받는 터널구조물을 각 부재로 나누어 1자유도 질량-스프링-감쇠기 모델로 치환하여 해석하는 모델을 개발하였다. 간이 모델을 사용하여 터널설계 요인인 최대 폭발하중크기, 지속시간, 부재 두께, 토피고에 대하여 민감도 해석을 수행하였다. 또한, 유한요소법을 사용하여 가스폭발에 대한 터널의 동적거동과 주변지반에 발생되는 파괴영역에 대하여 조사하였다. 1자유도 질량-스프링-감쇠기 모델과 FEM 해석결과의 비교로부터 터널의 중앙벽에 대한 동적거동결과는 거의 차이가 없음을 보여주었다.

• 화약ㆍ발파
• /
• 제25권2호
• /
• pp.1-10
• /
• 2007

본 연구에서는 1/5 축소모형 철근콘크리트 기둥을 이용하여 철근의 노출길이 및 수직하중과 발파공수와의 관계에 대해 연구하였다. 축소모형 철근콘크리트 기둥에 수직하중을 재하하여 철근의 노출 길이와 발파공수와의 관계를 비교하였다. 또한 발파된 축소모형 기둥의 무게와 철근이 노출된 축소모형 기둥의 무게를 발파공수와 비교하였다. 축소모형 철근콘크리트 기둥에 대한 시험결과로부터 철근의 노출길이 및 수직하중을 바탕으로 축소모형 철근콘크리트 기둥의 발파공수를 산정할 수 있으며, 이를 축소모형 구조물에 적용할 수 있음을 확인하였다.

• Computers and Concrete
• /
• 제26권3호
• /
• pp.275-283
• /
• 2020

Reinforced concrete (RC) does not provide sufficient resistance against impacts and blast loads, and the brittle structure of RC fails to protect against fractures due to the lack of shock absorption. Investigations on improving its resistance against explosion and impact have been actively conducted on high-performance fiber-reinforced cementitious composites (HPFRCCs), such as fiber-reinforced concrete and ultra-high-performance concrete. For these HPFRCCs, however, tensile strength and toughness are still significantly lower compared to compressive strength due to their limited fiber volume fraction. Therefore, in this study, the tensile behavior of slurry-infiltrated fiber-reinforced cementitious composites (SIFRCCs), which can accommodate a large number of steel fibers, was analyzed under static and dynamic loading to improve the shortcomings of RC and to enhance its explosion and impact resistance. The fiber volume fractions of SIFRCCs were set to 4%, 5%, and 6%, and three strain rate levels (maximum strain rate: 250 s^-1) were applied. As a result, the tensile strength exceeded 15 MPa under static load, and the dynamic tensile strength reached a maximum of 40 MPa. In addition, tensile characteristics, such as tensile strength, deformation capacity, and energy absorption capacity, were improved as the fiber volume fraction and strain rate increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.328-331
• /
• 2004

Recently, the study for practical construction application of recycled aggregate concrete is actively being proceeded, on the purpose of technical development for recycling on the construction waste concrete occurred at the time of destruction of building construction by the rapid increase of building wastes and exhaustion of natural aggregates. This study is performed to develop the permeable polymer concrete using recycled coarse aggregate and blast furnace slag for application of structures needed permeability. At 7 days of curing, compressive strength, flexural strength, water permeability and flexural load are in the ragge of $18\~20MPa,\;6\~7MPa,\;4.6\times10^{-2}\~6.9\times10^{-2}cm/s$ and $20\~25kN$, respectively. It is concluded that the recycled aggregate can be used in the permeable polymer concretes.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.39-43
• /
• 2010

The surfacing of bridge-decks are object to secure trafficability and to protect bridge face from impact load of traffic volume and other external conditions. But the deformation of pavements and cracks happen due to the damage of the bridge-decks surfacing from the increase of the traffic, short maintenance period and continuous vibration of bridge. This test is to make the 3-type high performance concrete that has different mixing ratio and is added the blast furnace slag, fly ash and silica respectively, and to compare 3-type high performance concrete of normal high strength concrete of $400kgf/cm^2$ strength through the static loading test and fatigue test. And test specimen is united floor slab and pavement for the durability of bridge.

• Smart Structures and Systems
• /
• 제22권3호
• /
• pp.327-334
• /
• 2018

In this paper, dynamic buckling of the smart subjected to blast load subjected to electric field is studied. The sandwich structure is rested on Pasternak foundation with springs and shear elements. Applying piezoelasticity theory and hyperbolic shear deformation beam theory (HSDBT), the motion equations are derived by energy method. For calculating the dynamic instability region (DIR) of the sandwich structure, differential quadrature method (DQM) along with Bolotin method is used. The aim of this study is to investigate the effects of applied voltage, geometrical parameters of structure and boundary conditions on the DIR of the structure. The results show that applying negative voltage, the DIR will be happened at higher excitation frequencies. In addition, the clamped-clamped beam leads to higher excitation frequency with respect to simply supported boundary condition.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.245-253
• /
• 2004

There has been recent demand for extending the life of age-degraded structures and equipment by such techniques as diagnosis, maintenance, safety assessment, and estimating residual life on iron-making plants and hydraulic, thermal, and nuclear power plants. These techniques take into account comprehensive scenarios that may cause malfunction and structural damage and allow an assessment of risk based on the likely scenarios. In particular the safety assessment and residual life estimation of age-degraded ships and equipment facilities require consideration of various factors such as mechanical and thermal stresses, corrosion, hardness, load variation due to changes of operating condition, crack generation and strength reduction of material by fatigue. In this study, a detail thermal stress analysis, one of useful techniques of safety assessment and maintenance, is performed on a blast furnace by using general FEM code (MSC/NASTRAN).