• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.77-80
• /
• 2001

IC lead frame needs the precision shape for good efficiency. In the blanking process, there are many parameter effected the dimensional accuracy : lead width, blanking order, striper force, tool clearance etc. In this research, the4 undesirable defects appeared in the final blanking process. so we measured the deflection of lead according to the stripper force using $PAM-STAMP_{TM}$. In the result, the deflection was decreased by increasing the stripper force properly. and we changed the blanking order on the test model. In the blanking order, deflection is good from the outer line position blanking to center line position. so we can design the precision die without tryout by the prediction of the lead deflection.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.1
• /
• pp.36-41
• /
• 2004

The blanking of thin sheet metal using progressive dies is an important process on production of precision electronic machine parts such as IC leadframe. This paper summarizes the results of simulating the progressive blanking process by means of LS/DYNA. In order to verify the influence of blanking order on the final lead profile and deformed configuration, simulation technique has been proposed and analyzed using a commercial FEM code, LS/DYNA. The results of FE-simulations are in good agreement with the experimental result. After then, to construct rule base in progressive blanking process, FE-simulation has been performed using a simple model. Based on this result rule base is set up and then the blanking order of inner lead is rearranged. Consequently, from the results of FE-simulation using suggested method in this paper, it is possible to predict the shift of lead to manufacture high precision lead frame in progressive blanking process. The proposed method can give more systematic and economically feasible means for designing progressive blanking process.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.35-41
• /
• 2003

The multihole blanking of thin sheet metal using progressive die set is an important process on production of precision electronic machine parts such as IC leadframe. In this paper, in order to investigate the influence of blanking order on the final lead profile and deformed configuration, simulation technique for progressive blanking process is proposed and analyzed by LS-DYNA. The results of FE-simulations are in good agreement with the experimental results. Consequently, from the results of FE-analysis based on the procedure proposed in this paper, it is possible to predict the deformation of lead and to manufacture high precision leadframes in progressive blanking process and these results might be used as a guideline to develop layout design system in multihole blanking process.

• Design & Manufacturing
• /
• v.9 no.1
• /
• pp.5-8
• /
• 2015

The company Daewoo Precision Industries imported fine blanking press of 40 tons from Switzerland with fine blanking tool in order to produce the fuse part of bomb in 1978 at first in Korea. About 1985 the first fine blanking tool for producing the door lock parts was manufactured in the company Gold Star (now LG). And then this technology was grown up with the growth of automobile industries in Korea. Now 31 companies are closely related to the fine blanking technology and there are total 146 fine blanking presses in Korea. The developments of fine blanking technology in industries have been oriented to the production of precise fine blanking parts, the reduction of die roll height on fine blanking parts, the production of complex fine blanking parts with progressive fine blanking tool including forming and forging technology, the production of high-strength steel fine blanking parts and so on. Some R&D activities in KITECH were introduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.565-570
• /
• 2011

There is always die roll in fine blanking parts which is able to have 100% clean shear surface. In this paper the change of die roll size was studied by fine blanking tryout in order to minimize die roll size. Various die inserts with different die chamfer were machined, fine blanking die was manufactured and tested. The die roll sizes of fine blanking samples were measured and the tendency of thickness directional die roll size was comprehended. This result will be used on the design of die chamfer in order to minimize thickness directional die roll size of fine blanking parts

• Transactions of Materials Processing
• /
• v.10 no.5
• /
• pp.425-432
• /
• 2001

In order to investigate the influences of process parameters on the shape of lead frame, experimental study has been carried out. In the experiment, dimensional accuracy of the die sets, measurement accuracy has been managed carefully enough to simulate actual lead frame blanking process. With the blanking of square-shaped specimen, the effects of clearance, strip holding pressure and bridge width on the shape of blanked profile have been investigated. Experimental results show that the burnish ratio is increased as the clearance decreases. the strip holding pressure increases, and bridge width increases. Although the results seems to be similar to the ordinary blanking, the lead frame blanking shows a subtle different characteristics to the ordinary blanking due to the narrow bridge width.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.108-113
• /
• 2013

Industrialization and modernization of the beginning of the IT industry is growing very fast. Since telecommunications industry was developed rapidly, technologies about miniaturization and high-precision of parts have been actively developed to lead information revolution. generally, the entire shear surface of the product applying fine blanking technology must be very precise. Fine blanking is used to save cost by avoiding post-processing of the product. When using press blanking, it spends a lot of money on the production by using many post-processing. Fine blanking typically used in 0.5~18 mm thick steel plate. Because a lot of post-processing cost can be used to process, except for fine blanking. In order to develop components "CHANCE CONTENTS" in the fine blanking process, the purpose of this study is to minimize the edge of the bridge, secured 95% of the material thickness of the shear surface using the 1.6 mm thickness of the material SPCC. Blanking process by introducing after changing thickness through forging process, due to change in vee-rring force and counter force, the experimental amount of depressions and flatness and the shear surface were analyzed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.3
• /
• pp.50-57
• /
• 1996

This study was performed the blankholding force and Vee-ring effects on blanking characteristics, such as maximum blanking force, burnish, dish-shape, hardness. etc. in fine-blanking die by the experimental method. Two types of aluminum (Al.1050-O, Al, 5052-H) Such as annealed and unannealed materials were used for the experiment. In order to get a hydrostatic pressure effect, the clearance was set to 0.5% of the thickness of strip, and the counter punch and stripper plate with Vee-ring was set-up. While this experiment was carry8ing out, the average blanking velocity was constant (37.5mm/sec). As a result of this study, we got a good surface roughness and a dimensions, the good squareness and the reduction of dish-shape could be obtained, and also the additional results obtained were such that the hardness of shear plane was increased and the maximum blanking force was reduce in the condition of Vee-ring height of 1.0~1.5mm, and blankholding force of 1200kg.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.296-299
• /
• 2002

The precision blanking of thin sheet metal is important process on production of precision electronic machine parts such as IC leadframe. In the blanking process, the factors that friction coefficient, tool clearance, material properties are the most important factors in the precision blanking process, because these factors affect the sheared face of product, side forces to punch during blanking process and surface condition after blanking process. So, many investigations have been performed. But, the former studies did not take up the characteristic of material. In this paper, in order to investigate the characteristic of blank, such as K(strength coefficient) and n(strain hardening coefficient), on the sheared face of blank and the side force to punch, FE-simulation has been analyzed by means of DEFORM-2D. To obtain input Parameters on FE-simulation, tensile and friction test has been done.

• Transactions of Materials Processing
• /
• v.30 no.3
• /
• pp.149-156
• /
• 2021

Fine blanking is a high-precision process combining principles of metal stamping and cold forming. Unlike conventional metal stamping, fine blanking uses a special triple action such as V-ring force, counter force, shearing force. This study performed the effect of pocket-shaped compression molding on the mold life of the fine blanking using the 7.4mm thick SM45C material. In order to determine the lifespan of the punch and die in the fine blanking molds, a trial mold was manufactured and various punch materials were selected to perform the mold life test. A study on the life of a fine blanking mold by applying a thick plate material was experimentally performed through a mold test.