• The KSFM Journal of Fluid Machinery
• /
• v.18 no.1
• /
• pp.59-64
• /
• 2015

The pitch control system in wind turbines becomes more and more important as the wind turbines are larger in multi-MW size. PI controller has been applied in most pitch controllers and it has been known that gain-scheduling is essential for pitch control of wind turbines. A demo model of 2 MW wind turbine which represents the whole dynamics of wind turbine including dynamic behaviors of blade, tower and rotational shaft is given in the commercial Bladed S/W for real wind turbines. In this paper, some results on step responses of the pitch PI controller and effectiveness of gain-scheduled pitch PI controller are presented through the Bladed S/W for the 2 MW wind turbine.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.567-571
• /
• 2004

The 2-dimensional unsteady flows on and around the cambered airfoils were computed by applying LES with the deductive dynamic SGS model. The unsteady flow field were used as inputs to compute the far-field sounds and directivity patterns from rotating blades by a hybrid approach that exploits Farassat's formula. The BEM (Boundary Element Method) was applied to predict the frequency characteristics from the rotating blades for the cases of even- and uneven-pitched fans. The BEM results suggested that the unevenly pitched fan have less pronounced discrete peaks at BEF frequencies, which was confirmed by the experiment.

• Journal of the Korean Society of Visualization
• /
• v.7 no.2
• /
• pp.64-71
• /
• 2010

The flow and noise characteristics of wake behind wind-turbine blades have been investigated experimentally using a two-frame particle image velocimetry (PIV) technique. Experiments were carried out in a POSTECH subsonic large wind-tunnel ($1.8^W{\times}1.5^H{\times}4.3^L\;m^3$) with KBP-750D (3-blade type) wind-turbine model at a freestream velocity of $U_o\;=\;15\;m/s$ and a tip speed ratio $\lambda\;=\;6.14$ (2933 rpm). The wind-turbine blades are connected to an AC servo motor, brake, encoder and torque meter to control the rotational speed and to extract a synchronization signal for PIV measurements. The wake flow was measured at four azimuth angles ($\phi\;=\;0^{\circ}$, $30^{\circ}$, $60^{\circ}$ and $90^{\circ}$) of the wind-turbine blade. The dominant flow structure of the wake is large-scale tip vortices. The turbulent statistics such as turbulent intensity are weakened as the flow goes downstream due to turbulent dissipation. The dominant peak frequency of the noise signal is identical to the rotation frequency of blades. The noise seems to be mainly induced by the tip vortices.

• Journal of Biosystems Engineering
• /
• v.18 no.3
• /
• pp.209-219
• /
• 1993

A series of soil bin experiment was carried out on sand to investigate if true model theory is applicable to blade-soil system and finally to find mathematical relationship between the dimensionless terms which contain the blade-soil parameters. The following conclusions were derived from the study. 1. It was proved that the draft of the prototype blade can be predicted without distortion by those of model blades with the length scale of 1.2, 2 and 2.4. 2. For the sand, bulk density was found to be a good measure of soil physical properties which are pertinent to predict the draft of the blade-soil system. 3. The mathematical relationship between $D/{\gamma}W$ and d/W, ${\beta}$, and $V^2/Wg$ are as follows ; $$\frac{D}{{\gamma}W^3}=124.98[\frac{d}{W}]^2+7.16[\frac{d}{W}]+0.43 \\ \frac{D}{{\gamma}W^3}=-0.00099{\beta}^2+0.13{\beta}-2.01 \\ \frac{D}{{\gamma}W^3}=0.041[\frac{V^2}{Wg}]^2+0.08[\frac{V^2}{Wg}]+1.3$$

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2005

An aerodynamic shape optimization technique has been developed for helicopter rotor blades in hover based on a continuous adjoint method on unstructured meshes. The Euler flow solver and the continuous adjoint sensitivity analysis were formulated on the rotating frame of reference for hovering rotor blades. In order to handle the repeated evaluation of the design cycle efficiently, the flow and adjoint solvers were parallelized using a domain decomposition strategy. A solution-adaptive mesh refinement technique was adopted for the accurate capturing of the tip vortex. Applications were made for the aerodynamic shape optimization of Caradonna-Tung rotor blades and UH60 rotor blades in hover. The results showed that the present method is an effective tool to determine optimum aerodynamic shapes of rotor blades requiring less torque while maintaining the desired thrust level.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.513-514
• /
• 2007

본 연구는 우리나라와 같은 상대적으로 낮은 풍속에 적합한 6[W]급 풍력터빈의 블레이드를 개발하고자 하였다. 풍력발전기의 출력은 풍속 및 블레이드의 회전수에 매우 의존적으로 풍속이 증가함에 따라 전력도 증가하였다. 또한, 피치각에 따라 블레이드의 회전수도 매우 다르며, 낮은 풍속 상태에서는 공기의 힘을 받는 면적이 클수록 출력특성이 줄게 나타났다. 최대출력은 피치각 $10^{\circ}$, 풍속 5.5[m/s]일 때 3.8[W] 의 출력을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.1
• /
• pp.96-101
• /
• 2011

In this study, we have established the design techniques, with which we can design and evaluate performance of blades on a horizontal axis current turbine, by application of blade element momentum theory considering the blade tip's loss model, and finally developed the domestic software(MCT-blade V2.0). We have designed and evaluated performance of blades for the 2MW class by using of the software, and confirmed its calculation results from BEMT by comparing those results from commercial code of ANSYS FLUENT. In a state of rated velocity 2.5m/s, the mechanical power from BEMT is calculated as 2,121kW, which is considered to satisfy the electrical power, but the value from CFD is calculated as 1,901kW, which is considered a little deficient for the target output.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.175-181
• /
• 2011

The purpose of this study is to secure the design data for the optimization of the radial turbine and heat cycle system, by using the CFD analysis technique and the design of 100kW class radial turbine applicable to waste heat recovery generation system for ship. Radial turbine was comprised of scroll casing, vane nozzle with 18 blades and rotor with 13 blades, and analysis grid was used to about 2.3 million. Mass flow rate and rotational speed was 0.5kg/s, 75,0000rpm, respectively. Eight kinds of inlet pressure was set between 195 and 620kPa. As the flow accelerated through the nozzle passage to the throat, the pressure level at the pressure and suction sides becomed similar to about Mach number of 0.35. When the inlet temperature and pressure was $250^{\circ}C$, 352kPa respectively, the isentropic efficiency and mechanical power showed the analysis results of 74% and 108kW.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.288-294
• /
• 2010

In recent years, wind energy has been the world's fastest growing source of energy. This paper describes the structural design and analysis of composite blade for 2 kW-level HAWT (horizontal axis wind turbine). The aerodynamic design and force, which are required to design and analyze a composite blade structurally, are calculated through BEMT(blade element momentum theory) implemented in public code PROPID. To obtain the equivalent material properties of filament wound composite blades, the rule-of-mixture is applied using the basic material properties of fiber and matrix, respectively. Lay-up sequence, ply thickness and ply angle are designed to satisfy the loading conditions. Structural analysis by using commercial software ABAQUS is performed to compute the displacement and strength ratio of filament wound composite blades.

• Journal of Biosystems Engineering
• /
• v.31 no.5 s.118
• /
• pp.403-409
• /
• 2006

This study was performed to design a peeling device for root crop that were considered of the three possible types such as blade belt type, brush type, and rotating blade type, and to inspect the characteristics of the experimented peeling methods based on the chonggag (altari) radish tests. The peeling performances by the blade belt type and brush type devices were not established so well with the troublesome like adhesion of the chip on the blades was occurred, and the difficulties to produce the blade parts were come out on these types of the peeling devices. But the peeling operations by the rotating blade type peeling device was completed without needs to clean blades, and it was concluded that it would be possible to practical mechanization of the root crop which shaped similar chonggag radish for it's constructional simplicity and feasibility.