• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.108-108
• /
• 2009

Precipitation hardening nickel base alloys strengthened by intermetallic compounds are extensively used to manufacture on the components of the hot section of gas turbine engines. To ensure structural stability and maintenance of strength properties for a long time, nickel alloys are normally subjected to complex alloying with elements to form ${\gamma}'$(gamma prime). Such alloys have a limited weldability, are normally welded in high temperature. However, laser welding have a merit that applies in room temperature as easy control of welding parameter and heat input. In this study, $CO_2$ laser welding is applied on STS304 plate with good ductility and precipitation hardening nickel base alloy (GTD111DS) used blade material. Also, several welding parameters are applied on powder, power and travel speed. There are no cracks in Rene 80 and IN 625 powder when STS304 plate is used. But IN 625 powder has no cracks and Rene 80 have some cracks in welds with GTD111DS substrate. Adjusting of welding parameter is tried to apply Rene 80 having a good strength compare to IN 625. In the result of adjusted welding parameter, optimized welding parameters are set with low power, low feed rate and high welding speed. Tensile strength of GTD111DS substrate with Rene 80 powder is same and over than the one of base metal in room temp and high temp($760^{\circ}C$).

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.2
• /
• pp.137-143
• /
• 2020

The CM247LC, a Ni-based superalloy material used for gas turbine hot gas path parts, is casted using directionally solidified technology to analyze the mechanical properties and microstructures through HIP (Hot Isostatic Pressing) and post-heat treatment, and to derive optimal HIP treatment conditions. The CM247LC material is being researched in various ways as an alternative material for prototyping gas turbine blades. In particular, the blade rotating part is exposed and operated in a high temperature and high-pressure environment, and when damaged, it may cause huge economic losses. Therefore, in order to use the CM247LC material as prototyping materials for gas turbine blades, the reliability of the microstructure and mechanical properties must be verified. In this study, after casting rod test specimens using CM247LC material by directionally solidified technology, after that the specimens were performed by HIP treatment and post-heat treatment to test two HIP conditions designed by KEPCO to derive the possibility of prototyping of CM247LC material and optimization of HIP treatment conditions. Additionally, the properties of CM247LC material were compared to the GTD111DS material using for 1,300℃ class gas turbine blades.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.441-448
• /
• 2016

The thrust force created by a propeller depends on the incoming flow velocity and the rotational velocity of the propeller. The performance of the propeller can be described by dimensionless variables, advanced ratio, thrust coefficient, and power coefficient. This study included the application of the immersed boundary lattice Boltzmann method (IBLBM) with the stereo lithography (STL) file of the rotating object for performance analysis. The immersed boundary method included the addition of the external force term to the LB equation defined by the velocity difference between the lattice points of the propeller and the grid points in the domain. The flow by rotating a 4-blade propeller was simulated with various Reynolds numbers (Re) (including 100, 500 and 1000), with advanced ratios in the range of 0.2~1.4 to verify the suggested method. The typical tendency of the thrust efficiency of the propeller was obtained from the simulation results of different advanced ratios. It was also necessary to keep the maximum mesh size ratio of the propeller surface to a grid size below 3. Additionally, a sufficient length of the downstream region in the domain was maintained to ensure the numerical stability of the higher Re and advanced ratio flow.

• Asian Journal of Turfgrass Science
• /
• v.21 no.2
• /
• pp.147-154
• /
• 2007

In March of 2004, gray snow mold (Typhula blight) caused by Typhula spp. occurred on perennial ryegrass (Lolium perenne L.) and Kentucky bluegrass (Poo pratensis L.) at MuJu golf courses in Jeonbuk Province. Leaves in the affected areas were matted together and frequently covered with white to grayish mycelia. Sclerotia were formed on the leaf blade, leaf sheath, or crown regions. The fungus isolated from the diseased leaf formed whitish mycelium, clamp connections, and light pink to brown, irregular-shaped small sclerotia of less than 1.4 mm in diameter, which are characteristic to Typhula incarnata. Optimum temperature ranges for mycelial growth were $5^{\circ}C$ to $15^{\circ}C$. The causal organism was confirmed to be T. incarnata as the partial sequence of its ribosomal RNA ITS1 (internal transcribed spacer) region was 91% homologous to those of T. incarnata in GenBank database. Out of the 14 fungicides tested fur antifungal activity in vitro, 10 fungicides including iprodione, tebuconazole, polyoxin D, flutolanil, hexaconazole, tolclofos-methyl, fosetyl-Al, mepronil, pencycuron+tebuconazole, and fenarimol completely inhibited fungal growth at their recommended concentrations. In the field test, these fungicides and others such as thifluzamide and thiram effectively controlled the gray snow mold of turfgrass with some variable degrees of control efficacies.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.415-431
• /
• 2022

Secondary flows have a huge impact on losses generation in modern low pressure gas turbines (LPTs). At design point, the interaction of the blade profile with the end-wall boundary layer is responsible for up to 40% of total losses. Therefore, predicting accurately the end-wall flow field in a LPT is extremely important in the industrial design phase. Since the inlet boundary layer profile is one of the factors which most affects the evolution of secondary flows, the first main objective of the present work is to investigate the impact of two different inlet conditions on the end-wall flow field of the T106A, a well known LPT cascade. The first condition, labeled in the paper as C1, is represented by uniform conditions at the inlet plane and the second, C2, by a flow characterized by a defined inlet boundary layer profile. The code used for the simulations is based on the Discontinuous Galerkin (DG) formulation and solves the Reynolds-averaged Navier-Stokes (RANS) equations coupled with the Spalart Allmaras turbulence model. Secondly, this work aims at estimating the influence of viscosity and turbulence on the T106A end-wall flow field. In order to do so, RANS results are compared with those obtained from an inviscid simulation with a prescribed inlet total pressure profile, which mimics a boundary layer. A comparison between C1 and C2 results highlights an influence of secondary flows on the flow field up to a significant distance from the end-wall. In particular, the C2 end-wall flow field appears to be characterized by greater over turning and under turning angles and higher total pressure losses. Furthermore, the C2 simulated flow field shows good agreement with experimental and numerical data available in literature. The C2 and inviscid Euler computed flow fields, although globally comparable, present evident differences. The cascade passage simulated with inviscid flow is mainly dominated by a single large and homogeneous vortex structure, less stretched in the spanwise direction and closer to the end-wall than vortical structures computed by compressible flow simulation. It is reasonable, then, asserting that for the chosen test case a great part of the secondary flows details is strongly dependent on viscous phenomena and turbulence.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.479-483
• /
• 2003

Knowledge of N accumulation during the vegetative growth stage of rice (Oryza sativa L.) is useful for determining the need for topdressing fertilizer N at panicle initiation and booting stage. The chlorophyll content showing SPAD threshold values generated by a simple and portable diagnostic instrument, chlorophyll meter, enables implement the measures of greenness and/or relative chlorophyll contents of leaves. Two-year field experiment was conducted to evaluate the possible application of the chlorophyll meter for N diagnosis in transplanted paddy rice. The chlorophyll meter threshold values (SPAD reading) were taken from uppermost fully expanded leaves at 10days interval from 10 days after transplanting. SPAD readings and N contents of rice leaf blade were closely related at the maximum tillering stage. SPAD readings during growth period showed M-shaped distribution, sharply finished to drop at 20 days after heading date. As N fertilizer increased, the SPAD readings increased. The SPAD readings showed more critical and clear difference in immature paddy field than in ordinary paddy field, where the former soil showed higher response to N fertilizer topdressed. Based on the PAD readings for obtaining an optimum sink size bearing the maximum grain yield, N fertilizer to be dressed at the panicle initiation stage is to be adjusted within the SPA$\times$tillers value range 888 in ordinary paddy, and 800 in immature paddy vice. Among the cultivars tested, Huckhyangbyeo, Jinpumbyeo, Ansungbyeo, Sobibyeo, Manpungbyeo, Sangmibyeo, Jinbongbyeo, showed high SPAD values, whereas the cultivars, Nonghobyeo, Saechuchungbyeo, Hwabongbyeo, Mananbyeo, did low values and others intermediate SPAD threshhold values.

• Applied Microscopy
• /
• v.33 no.3
• /
• pp.233-241
• /
• 2003

Patterns of tannin accumulation in leaves of C-4 Euphorbia maculata have been examined using electron microscopy. Tannins, which are secondary metabolite phenolic compounds, were found to be deposited conspicuously in vacuoles of certain tissues regardless of their stage in development. However, patterns of deposit accumulation were distinguishable by their cell type during leaf differentiation. The deposits appeared most concentrated in the concentric bundle sheath cells enclosing veins, while little or no density was detected mostly in the mesophyll cells close to the epidermis. An ultrastructural study revealed that the deposits were restricted to the vacuoles at an early stage of leaf development; during which the vacuoles were almost completely filled with the tanniferous substances. The deposits themselves took different forms ranging from granules to huge globules while expanding leaf blade. As the leaf matured, the deposits accumulated either centripetally adjacent to the inner tangential tonoplast or by penetration into the cytoplasm amongst various cellular organelles, resulting in an extremely dense cytoplasm. Electron micrographs frequently showed the delineation of each organelle by the presence of dense deposits within the cytoplasm. Some large depository vacuoles filled with tannins had a corrugated appearance on the sectioned surface. The pattern and potential role of the deposits have been discussed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.379-385
• /
• 1983

Forage productivity of Job's tears (Coix lachryma-jobi L.) and adlay (C. lachryma-jobi var. mayuen (ROMAN.) STAPF) and a hybrid corn (Kwangog) and sorghum-sudangrass hybrid (Pioneer 988) was compared in the southern part of Korea where black streaked dwarf virus' (BSDV) is prevalent. Emergence of Job's tears and adlay was more delayed compared to a corn or sorghum-sudangrass hybrid under the drought field conditions. Early growth and regrowth of Job's tears and adlay were less than those of sorghum-sudangrass hybrid. Fresh weight, dry weight, and digestible dry matter of Job's tears and adlay cut once approximately 40 days after flowering were much higher than those of two cuts at every flowering stage. Dry weight of one-cut Job's tears and ad lay harvested 40 days after flowering was similar to the total dry weight of three-cut sorghum-sudangrass hybrid but higher than that of silage corn. Digestible dry matter production was greater in the order of sorghum-sudangrass, corn, one-cut and two-cut Job's tears and adlay. Corn was severely infected with BSDV, but digestible dry matter was relatively high due to its higher in vitro dry matter digestibility. Among the Job's tears and adlay varieties, a variety of Job's tears with globular fruit shape was best for forage production due to its taller plant height, thick stem, wider leaf blades, higher leaf blade/total dry weight ratio, and higher forage yield. However, hulled grain yield of ad lay varieties was higher than that of Job's tears due to a higher hulled/rough grain ratio although they had similar rough grain yields.

• Journal of Plant Biotechnology
• /
• v.34 no.3
• /
• pp.253-261
• /
• 2007

This study was conducted to develop an antibiotics marker-free potato (Solanum tuberosum L., cv. Taedong valley) plant having resistance against two herbicides. Agrobacterium tumefaciens strain EHA105, harboring a binary vector plasmid pCAMBIA3300 containing bar gene under the control of a promoter CaMV35S and linked CP4-EPSPS genes driven by CaMV35S promoter, was used in the current study. The leaf segments of newly bred potato variety (cv. Taedong Valley) was co-cultured with Agrobacterium. Then, the regenerated individual shoots were excised and transferred to potato multiplication medium supplemented with 0.5 mg/L phosphinothricin. The shoots were rooted in MS medium without hormone and obtained putative transgenic plant E3-6. Integration of target genes into the E3-6 plant and their expression was confirmed by PCR, Southern analysis, and ELISA test. The tissue necrosis test on young leaf blade and shikimic acid accumulation test using the tissue of E3-6 plant were conducted to investigate the resistance to glufosinate-ammonium and glyphosate, respectively. The transgenic plants (E3-6) simultaneously showed a high resistance to both herbicides. The same results were surely obtained also in the whole plants foliar-treated with alone or mixture of two herbicides, glufosinate-ammonium and glyphosate.

• Journal of Veterinary Clinics
• /
• v.26 no.4
• /
• pp.324-330
• /
• 2009

This study was performed to determine the effectiveness of poloxamer/sodium alginate mixture(PX/SA) barriers on prevention of post-operative peritoneal adhesion in dogs. Fifteen mongrel dogs were divided into three experimental groups: non-treated group, 2% Sodium Carboxymethylcellulose (SCMC) treated group and PX/SA treated group. In order to induce adhesions, the anti-mesenteric serosa of the ileum was exteriorized and then abraded in a standard manner by scraping with a scalpel blade to create homogeneous petechial hemorrhagic surface over a 1 ${\times}$ 1 cm area. Solution of SCMC was allowed to spread across the intraperitoneal organs through a catheter using a syringe. PX/SA was simply coated over the abraded tissues. On day before and day 1, 4, 7, and 14 after operation, venous blood specimens were collected for measurement of RBC, total WBC and fibrinogen. The adhesions were blindly assessed 3 weeks later by using a computerized tensiometer. The RBC, total WBC and fibrinogen values of three groups showed no statistical significances. The mean tensile strength(gram force, gf) of formed adhesions on day 21 after surgery was 173.05${\pm}$113.48 in the non-treated group, 111.42 ${\pm}$ 38.25 in the SCMC group, and 69.00 ${\pm}$ 45.07 in the PX/SA group. The tensile strength values for adhesion seperation in PX/SA group was lower than those in SCMC group(p < 0.05) and significantly lower than those in the non-treated group(p < 0.05). Our data suggested that PX/SA should be effective on reducing peritoneal adhesion formation in dogs compared with SCMC. PX/SA may be applicable to preventing post-operative intraperitoneal adhesion in dogs.