• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.666-676
• /
• 2000

For the study of morphological variation of Q. variabilis natural population in Korea, 19 populations were selected through the country in considering latitude, longitude, and geographical characters. Thirty trees were randomly selected from each population and 60 mature leaves were sampled from each tree. Four characters (leaf blade length, maximum blade width, petiole length, and vein number) were measured, and their ratios (the ratio of blade length to maximum blade width, the ratio of blade length to petiole length, the ratio of petiole length to vein number, upper 1/3 blade width to maximum blade width, and upper 1/3 blade width to lower 1/3 blade width) were calculated. 1. Analysis of variance for all leaf characters were significantly different among populations and among individuals within population. Contributions of variance among individuals within population in all the characters were higher than those among populations. Therefore, selection of plus trees may be preferable to desirable populations for breeding program of Q. variabilis. 2. Among principal component analysis for leaf characters, primary 2 principal components appeared to be major variables for leaf form of Q. variabilis because of the loading contribution of 80.5%. The first contribution component was petiole length/vein number and petiole length ; the second one was upper 1/3 blade width/maximum blade width, upper blade width/lower 1/3 blade width and vein number, respectively. 3. Latitude was positively correlated with blade length/maximum blade width and blade length/petiole length, but negatively correlated with petiole length/vein number, upper 1/3 blade width/maximum blade width, upper 1/3 blade width/lower 1/3 blade width, petiole length, and vein number. But, for longitude and altitude the former two traits and the later five traits exhibited the negative and positive correlation, respectively. 4. Cluster analysis using complete linkage method for leaf characters showed two groups to Euclidean distance 1.6. They were group I of population 1. 4, 5, and 13 and group II of population 2, 3, 6, 7, 8, 9, 10, 11, 12, 14, 15, 16, 17, 18, and 19. However, group II was divided again to Euclidean distance 1.3, that is a group including population 3, 7, 10, 14, 15, and 17(group II-1) and the other group comprising population 2, 6, 8, 9, 11, 12, 16, 18, and 19(group II-2). This cluster could be mainly observed due to difference among population in aspect (group I : NE, group II-1 : SE, and group II-2 : SW).

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.1
• /
• pp.1-12
• /
• 2009

Surrogate modeling is applied to a compressor blade shape optimization to modify its stacking line and thickness to enhance adiabatic efficiency and total pressure ratio. Six design variables are defined by parametric curves and three objectives; efficiency, total pressure and a combined objective of efficiency and total pressure are considered to enhance the performance of compressor blade. Latin hypercube sampling of design of experiments is used to generate 55 designs within design space constituted by the lower and upper limits of variables. Optimum designs are found by formulating a PRESS (predicted error sum of squares) based averaging (PBA) surrogate model with the help of a gradient based optimization algorithm. The optimum designs using the current variables show that, to optimize the performance of turbomachinery blade, the adiabatic efficiency objective is improved substantially while total pressure ratio objective is increased a very small amount. The multi-objective optimization shows that the efficiency can be increased with the less compensation of total pressure reduction or both objectives can be increased simultaneously.

• 연구논문집
• /
• s.25
• /
• pp.67-76
• /
• 1995

A grid generation algorithm associated with turbomachinery cascade flow fields has been developed. The present grid generation system consists of four separate modules. The system input is made of the results of the preliminary design, i.e., flow-path, aerodynamic conditions along the spanwise direction, and the blade profile data. The grid generation method generates a series of two-dimensional grids in the blade-to-blade passage to build up the three-¬dimensional grid, The numerical algorithm adopts the combination of the algebraic and elliptic method to create the internal grids efficiently and quickly. The resultant grids generated from each module of the system are used as the preprocessor for the performance prediction of the turbomachinery blade using Naveir-Stokes method in addition to the blade surface modelling for CAD data. For purposes of illustration, the grid generation system is applied to several complex geometries inculding a turbine rotor with and without a tip flow grid. Application to the blade design of the LP compressor was demonstrated to be very reliable and practical in support of design activities. This customized system are coupled strongly with the design procedure and reduces the man-hours required to predict the aerodynamic performance of the turbomachinery cascades using the CFD technique.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.12
• /
• pp.1164-1171
• /
• 2012

Recently, researches related to the green energy generation systems have increased significantly. Among them wind turbines are the most spread practical green energy generation systems. In order to enhance the power generation capacity of the wind turbine blade, the length of wind turbine blade has increased. It might cause undesirable excessive dynamic loads. Therefore dynamic characteristics of a wind turbine blade system should be identified for a safe design of the system. In this study, the equations of motion of a wind turbine blade system undergoing gravitational force are derived considering wind force and pitch angle. Effects of wind speed, variation of pitch angle of the wind turbine blade, rotating speed, and the blade length on its stability characteristics are investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.68-75
• /
• 2009

In this study, aeroelastic response analyses have been conducted for a 3D wind turbine blade model. Advanced computational analysis system based on computational fluid dynamics(CFD) and computational structural dynamics(CSD) has been developed in order to investigate detailed dynamic responsed of wind turbine blade. Vibration analyses of rotating wind-turbine blade have been conducted using the general nonlinear finite element program, SAMCEF (Ver.6.3). Reynolds-averaged Navier-Stokes (RANS)equations with spalart-allmaras turbulence model are solved for unsteady flow problems of the rotating turbine blade model. A fully implicit time marching scheme based on the Newmark direct integration method is used for computing the coupled aeroelastic governing equations of the 3D turbine blade for fluid-structure interaction (FSI) problems. Detailed dynamic responses and instantaneous Mach contour on the blade surfaces considering flow-separation effects are presented to show the multi-physical phenomenon of the rotating wind-turbine blade model.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.3
• /
• pp.197-205
• /
• 2009

Since large-scale commercial wind turbine generator systems such as MW-class wind turbines are becoming widely operated, the vibration and distortion of the blade are becoming larger and larger. Therefore the soft structure design instead of the solid-design is one of the important concepts to reduce the structural load and the cost of the wind turbine rotors. The objectives of the study are development of the fluid-structure coupled analysis code and evaluation of soft rotor-blade design to reduce the unsteady structural blade load. In this paper, fluid-structure coupled analysis for the HAWT rotor blade is performed by free wake panel method coupled with hinge-spring blade model for the flapwise blade motion. In the model, the continuous deflection of the rotor blade is represented by flapping angle of the hinge with one degree of freedom. The calculation results are evaluated by comparison with the database of the NREL unsteady aerodynamic experiment. In the analysis the unsteady flapwise moments in yawed inflow conditions are compared for the blades with different flapwise eigen frequencies.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.738-744
• /
• 2011

The reliability of blade root fixing section is required to endure the centrifugal force and vibration stress for the last stage blade of steam turbine in thermal power plant. Most of the domestic steam turbine last stage blades have finger type roots. The finger type blade is very complex, so the inspection had been performed only on the exposed fixing pin cross-section area due to the difficulty of inspection. But the centrifugal force and vibration stress are also applied at the blade root finger and the crack generates, so the inspection method for finger section is necessary. For the inspection of root finger, inspection points were decided by simulating ultra-sonic path with 3D modeling, curve-shape probe and fixing jig were invented, and the characteristics analysis method of ultrasonic reflection signal and defect signal disposition method were invented. This invented method was actually executed at site and prevented the blade liberation failure by detecting the cracks at the fingers. Also, the same type blades of the other turbines were inspected periodically and the reliability of the turbine increased.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.2
• /
• pp.149-154
• /
• 2013

This study was performed to develop a high efficiency submersible axial pump for concentration wastewater treatment. To do this, we simulated the effect of some parameters such as the axial twist angle of a blade(${\beta}$), the radial twist angle of a blade(${\alpha}$) and the length of a blade (l) on pump efficiency using commercial code, ANSYS CFX and BladeGen. The results showed that the axial twist angle of a blade(${\beta}$) was the most sensible parameter on the pump efficiency. And the pump efficiency had a maximum at ${\beta}=20^{\circ}$, ${\alpha}=110^{\circ}$ and l=240 mm.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.41-50
• /
• 2003

Numerical analysis was carried out to investigate performance and combustion characteristics of KSR-III liquid rocket engine with several types of baffle. To evaluate the change of performance and combustion characteristics with several types of baffle, the first numerical calculations were performed about baffle tab, radial blade baffle, and hub-and-spoke baffle. Then radial blade and hub-and-spoke baffle were determined to design two types of the KSR-III engine with baffles. Also to investigate the effect of injector arrangements and baffle positions, two types of radial blade baffle were calculated then numerical calculations were carried out with changing axial length of radial blade I, II and hub-and-spoke baffle. While axial length of baffle effected to performance very small, injector arrangement effected to performance largely through calculations of radial blade I, II. From the viewpoint of combustion instability, hub-and-spoke baffle controlled combustion instability effectively and there was the performance of hub-and-spoke baffle between radial blade I and II.