• 한국전산구조공학회논문집
• /
• 제30권1호
• /
• pp.31-37
• /
• 2017

본 논문에서는 이종재질로 구성된 세장비가 큰 보의 차원축소와 복원의 효율성과 정확성을 입증하기 위하여 VABS와 3차원 유한요소해석 모델의 결과와 비교하였다. 그리고 3차원 유한요소모델과 차원축소 모델을 가상균열닫힘법을 이용하여 에너지 해방률을 계산하였다. 원형과 사각형의 단면에 초기 크랙을 가진 수치모델을 이용하여 보의 차원축소와 복원기법 및 가상균열닫힘법을 이용하여 복원해석 결과 및 에너지 해방률을 비교하여 효율성과 정확성을 입증하였다. 특히 제시된 에너지 해방률 계산 기법은 고고도 무인기의 날개, 헬리콥터 로터 블레이드, 풍력 블레이드, 틸트로터 등의 정적, 동적 모델링 및 수명평가에 활용될 수 있을 것이다.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.259-264
• /
• 2014

Tip vortex cavitation (TVC) is important for naval ships and research vessels that require raising the cavitation inception speed to maximum possible values. The concepts for alleviating the tip vortex are summarized by Platzer and Souders (1979), who carried out a thorough literature survey. Active control of TVC involves the injection of a polymer or water from the blade tip. The main effect of such mass injection (both water and polymer solutions) into the vortex core is an increase in the core radius, consequently delaying TVC inception. However, the location of the injection port needs to be selected with great care in order to ensure that the mass injection is effective in delaying TVC inception. In the present study, we propose a semi-active control scheme that is achieved by attaching a thread at the propeller tip. The main idea of a semi-active control is that because of its flexibility, the attached thread can be sucked into the low-pressure region closer to the vortex core center. An experimental study using a scale model was carried out in the cavitation tunnel at the Seoul National University. It was found that a flexible thread can effectively suppress the occurrence of TVC under the design condition for a model propeller.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.14-18
• /
• 2013

Blades of horizontal axis are nowadays made of composite materials. Generally, composite materials satisfy design provides lower weight and good stiffness, while laminate composites have often damages as like the delamination and cracks at the interface of laminates. The box spar and tail parts of a blade are composed of the CFRP/GFRP hybrid laminate composites. However, delamination and the interfacial crack often occur in the interface of CFRP/GFRP hybrid laminate composites under the mixed mode fracture condition, especially mode I and mode II. Therefore, there is a need for the evaluation of the mixed mode fracture behavior during the delamination of CFRP/GFRP hybrid laminates. This study shows the experimental results for the delamination fracture toughness in CFRP/GFRP hybrid laminate composites. Fracture toughness experiments and estimation are performed by using DMMB(Dissimilar mixed mode bending) specimen. The materials used in the test are a commercial woven type CFRP(Carbon fiber reinforced plastic) prepreg(CF3327) and UD type GFRP(Glass fiber reinforced plastic) prepreg(HD224A). A CFRP/GFRP hybrid laminate composite is composed by the 10 plies CFRP and GFRP prepreg for DMMB. A thickness of CFRP and GFRP layer is 2.5mm and 3.0mm, respectively. Also the fulcrum location which is a loading parameter is changed from 80 to 100mm on the specimen of length 120mm because it defines the ratio of mode I to mode II. In this study, the effects of the fulcrum location are evaluated in the viewpoint of energy release rate in mode I and mode II contribution. The results show that the delamination crack initiates at higher displacement and lower load according to the increase of the fulcrum location ratio. And the variation of the energy release rate for mode I and II contributions for the mode mixity are shown.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1244-1250
• /
• 2014

The temperature of the main engine cabin of commercial vessel is very high. The material SS-316L undergoes creep damage at temperatures exceeding $450^{\circ}C$. It is essential to maintain the highly stressed engine cabin below the creep regime. Hence, seawater is employed in this kind of maritime vehicles as cooling liquid. It obtains the thermal energy at the cooling pipe line after passing through main engine cooling system. To harness the energy in the seawater, a turbine can be installed to absorb the energy in the seawater before being released into the sea. In this study, a cooling pipe line is selected to apply the tubular type hydro turbine for transferring the energy. Numerical analysis for investigating the performance and the internal flow characteristics of the tubular turbine is conducted. The results show that the maximum efficiency of 85.8% is achieved although the efficiency drops rapidly at partial flow rate condition. The efficiency descends slowly at the condition of excess flow rate. There is a relatively wide operating range of flow rate of this turbine to keep high efficiency at the excess flow rate condition. For the internal flow of the turbine, there is uniform streamline on the suction and pressure sides of the blade at the design point. However, the secondary flow appears at the suction and pressure sidesat the excess flow rate.In addition, it appears only at pressure side at the partial flow rate condition.

• 대한기계학회논문집A
• /
• 제37권6호
• /
• pp.769-774
• /
• 2013

가스터빈엔진의 핵심 부품인 디스크와 블레이드는 고효율, 수명주기 동안의 운용비 최소화 등의 요구조건으로 고온의 터빈입구 온도, 고압축비, 고속 환경에서 지속적으로 운용된다. 이러한 가혹한 환경에서의 구조 안전성을 평가하기 위해서는 재료 모델링과 유한요소해석 기법 등이 필수적이며 더 나아가 형상최적화가 반드시 요구된다. 본 연구에서는 터빈 디스크의 구조 건전성을 평가하기 위해 2 차원 축 대칭 및 섹터 모델을 생성하고, 열-구조 연성해석과 접촉 해석을 포함한 유한요소 해석을 수행하고자 한다. 이를 근거로 터빈 디스크에서 구조적으로 취약한 2 개의 영역인 디스크 보어와 디스크와 블레이드의 연결 부위인 도브테일에 대해 형상변수 고찰을 하고자 한다. 최종적으로 형상변수 결과를 기초로 한 개선된 디스크 형상을 제안함과 동시에 좀 더 정교한 형상최적화가 필요함을 확인한다.

• 한국항공우주학회지
• /
• 제35권11호
• /
• pp.964-972
• /
• 2007

공기역학적으로 최대동력계수를 얻을 수 있도록 최적화된 블레이드를 장착한 수평축 풍력터빈 모델을 아음속 풍동에 장착하여 공력특성을 실험하였다. Upwind 방식과 downwind방식의 풍력 터빈 로터의 공력 특성을 비교하였을 때, 후자가 전자에 비해 측정토크의 교란이 더 크게 나타났으며, 이는 지지대에서 발생된 후류와 블레이드의 상호간섭이 원인으로 작용한다고 여겨진다. 블레이드 설치각이 0o인 경우에 설계 속도비 6에 해당하는 위치에서 최대 동력계수를 보여주고 있어 설계 조건을 잘 만족함을 알 수 있었다. 또한 음의 피치각 변화가 같은 값의 양의 피치각 변화에 비해 더 커다란 동력 감소가 발생되는 결과를 보여주었다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.295-302
• /
• 2009

The flow in the draft tube cone of Francis turbines operated at partial discharge is a complex hydrodynamic phenomenon where an incoming steady axisymmetric swirling flow evolves into a three-dimensional unsteady flow field with precessing helical vortex (also called vortex rope) and associated pressure fluctuations. The paper addresses the following fundamental question: is it possible to compute the circumferentially averaged flow field induced by the precessing vortex rope by using an axisymmetric turbulent swirling flow model? In other words, instead of averaging the measured or computed 3D velocity and pressure fields we would like to solve directly the circumferentially averaged governing equations. As a result, one could use a 2D axi-symmetric model instead of the full 3D flow simulation, with huge savings in both computing time and resources. In order to answer this question we first compute the axisymmetric turbulent swirling flow using available solvers by introducing a stagnant region model (SRM), essentially enforcing a unidirectional circumferentially averaged meridian flow as suggested by the experimental data. Numerical results obtained with both models are compared against measured axial and circumferential velocity profiles, as well as for the vortex rope location. Although the circumferentially averaged flow field cannot capture the unsteadiness of the 3D flow, it can be reliably used for further stability analysis, as well as for assessing and optimizing various techniques to stabilize the swirling flow. In particular, the methodology presented and validated in this paper is particularly useful in optimizing the blade design in order to reduce the stagnant region extent, thus mitigating the vortex rope and expending the operating range for Francis turbines.

• 한국유체기계학회 논문집
• /
• 제17권4호
• /
• pp.30-39
• /
• 2014

The cross flow turbine is economical because of its simple structure. For remote rural region, there are needs for a more simple structure and very low head cross flow turbines. However, in this kind of locations, the water from upstream always flows into the turbine with some other materials such as sand and pebble. These materials will be damage to the runner blade and shorten the turbine lifespan. Therefore, there is a need to develop a new type of cross flow turbine for the remote rural region where there is availability of abundant resources. The new design of the cross flow turbine has an inlet open duct, without guide vane and nozzle to simplify the structure. However, the turbine with inlet open duct and very low head shows relatively low efficiency. Therefore, the purpose of this study is to optimize the shape of the turbine inlet to improve the efficiency, and investigate the internal flow of a very low head cross flow turbine. There are two steps to optimize the turbine inlet shape. Firstly, by changing the turbine open angle along with changing the turbine inlet open duct bottom line (IODBL) location to investigate the internal flow. Secondly, keeping the turbine IODBL location at the maximum efficiency achieved at the first step, and changing the turbine IODBL angle to improve the performance. The result shows that there is a 7.4% of efficiency improvement by optimizing turbine IODBL location (open angle), and there is 0.3% of efficiency improvement by optimizing the turbine IODBL angle.

• 대한기계학회논문집A
• /
• 제38권4호
• /
• pp.379-384
• /
• 2014

가스터빈엔진의 가장 핵심 부품인 디스크와 블레이드는 고온, 고압축비, 고속 회전이라는 가혹한 환경에서 지속적으로 운용된다. 이러한 가혹한 환경과 디스크와 블레이드가 가지는 큰 회전 에너지로 인해 디스크 및 블레이드에 의해 유발되는 파손은 항공기 손상 혹은 탑승자의 피해로 이어지는 재해적 고장 혹은 한계 고장으로 이어진다. 그러므로 디스크와 블레이드의 구조적 건전성의 마진을 충분히 확보하기 위해서 본 연구에서는 디스크의 취약 부위인 도브테일의 형상을 최적화하고, 그 해의 강건성을 확인하기 위해 치수 공차와 피로 수명의 산포와 같은 불확실성에 대하여 신뢰도 해석을 수행하고자 한다. 이 결과를 통해 결정론적 방법인 최적설계의 필요성과 함께 한계를 확인하고, 향후 신뢰도 기반 최적설계의 필요성을 인지하고자 한다. 이를 위해 비선형 열-구조 연성해석과 접촉 해석을 포함한 유한요소해석을 수행하였다.

• 대한음성언어의학회:학술대회논문집
• /
• 대한음성언어의학회 2003년도 제19회 학술대회
• /
• pp.182-182
• /
• 2003

Objectives : The methods to treat glottic incompetence include thyroplasty type I, arytenoid abduction, and intracordal injection using various materials. The intracordal injection is easy and simple and does not require skin incision. In general, the grafted cartilage shows a high survival rate, a low absorption rate and small voluminous change. The authors performed injection of minced autologous auricular cartilage and fat using a Bruning injector in unilateral vocal cord palsy We evaluate the effect and safety of autologous auricular cartilage intracordal injection. Study Design : Retrospective study. Methods : Auricular cartilage was obtained by incising tragus vertically and it was minced with a scalpel and #15 blade. About 2g of abdominal fat was obtained by small periumbrical incision and cut into small pieces. The minced cartilage was put into a 1$m\ell$ injector and then the injector was filled with fat. The operation was conducted under laryngeal microscope. Minced cartilage was injected into the vocalis muscle at the junction of the middle and posterior third of the vocal fold. In three cases, we performed autologous cartilage intracordal injection. Results : We observed no postoperative complications, such as dyspnea, granulation, inflammation, in any of the cases. The voice was improved compared with the voice prior to operation in all cases. Conclusion : Although the cases are still limited and the observation period is short, we suggest that the autologous cartilage using the auricular cartilage is the ideal and new effective augmentative material in vocal cord palsy.