• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.365-368
• /
• 2003

전북 부안군에 설치된 30kW급 Dual-rotor 풍력발전기의 Main rotor blade를 대상으로 공기역학적 모델링을 수행한 후 각종 바람 상황과 풍속에 따라 변화하는 RPM 상황을 고려하여 전산모의 실험을 수행하였다. 또한 출력성능을 향상시키기 위하여 최대 출력을 계산하고 이를 추종하도록 하는 직접 출력 제어 알고리즘을 제안하였다.

• Transactions of Materials Processing
• /
• v.19 no.2
• /
• pp.127-131
• /
• 2010

Carbon-epoxy prepreg has been introduced in the forming of the upper and lower swash plates that control the pitch of rotor blade of unmanned helicopter because of its lightweight. Taguchi experimental method has been used by introducing the variables such as arrangement angle, laminated number and forming temperature, in order to obtain the proper forming method by using prepreg satisfying the required strength of the swash plate. In the evaluation of structural safety for the swash plates, three kinds of models are considered by using FE-analysis. In comparison of the hot forged products with Al6061-T6 and the formed products with prepreg, it was found that ultimate tensile strength of the products with prepreg is three times higher than that of the Al6061-T6, and the weight reduction of 68.5g can be achieved by using prepreg swash plates.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.236-239
• /
• 2011

This paper introduces the design concepts and characteristics of WinDS3000$^{TM}$(TC IIa) which is a trade name of Doosan's 3MW offshore/onshore wind turbine. WinDS3000$^{TM}$(TC IIa) has been designed in consideration of high Reliability, Availability, Maintainability and Serviceability (RAMS) and low cost of electricity (CDE) for the TC IIa condition based on GL guideline. An integrated drive-train design with an innovative three-stage gearbox has been introduced to minimize nacelle weight of the wind turbine and to enhance a high reliability for transmission. A permanent magnet generator with full converter system has been introduced to get higher efficiency in partial load operation and grid-friendly system for both 50 Hz and 60 Hz. A pitch-regulated variable speed control system has been introduced to control wind turbine power while generator reaction torque can be adjusted almost instantaneously by the associated power electronics. The wind turbine has been also equipped with condition monitoring and diagnostic systems in order to meet maintainability requirements.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.691-698
• /
• 2014

This paper describes the manufacturing processes for a flexbeam and torque tube made of composite materials, along with the procedures for testing their basic properties. A flexbeam and torque tube can be considered to be key structural components of a bearingless rotor hub system. A hinge offset effect can be realized by a large elastic deformation and twist of the flexbeam, and the blade pitch control forces are transferred by the rotation of the torque tube. The basic property tests included bending and twist tests to determine the flap stiffness, lag stiffness, and torsion stiffness of the flexbeam, torque tube, and blade, and these tests were performed prior to starting the whirl tower test. In addition, the estimated results were compared with experimental data, and the calculations were found to be a good match for the analysis results and had a similar tendency. Through these results, we could confirm that a flexbeam and torque tube made of composite materials satisfied the structural stiffness requirements.