• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.298-303
• /
• 2010

To explore on the defense strategies against hervivory of Juglans regia and J. mandshurica, morphological characteristics of the leaf, leaf domatia structure and the number, herbivores insects and mites on the leaves, collected from the trees growing in Mt. Chiak, Mt. Cheongtae, Mt. Jungwang, Namyangju-si and Wonju-si, were investigated from May to October, 2009. Domatia of J. mandshurica revealed tuft type, these of J. regia revealed pocket+tuft type. Domatia number per leaflet proved the higher figures, 28.3/leaflet for J. mandshurica, and the lower, 19.6/leaflet for J. regia. Leaf surface trichomes of J. regia revealed stellates only on the domatia structures, and that of J. mandshurica does dense stellates and glandular hairs on the leaf-blade and vein. Predatory mites' number per leaflet proved highly significant differences among tree species, and mean of predatory mites was higher values (4.8/leaflet) in J. mandshurica and lower values (3.5/leaflet) in J. regia. Small amount of nectar are found distal veinparts on the leaf margin of J. mandshurica. Dense glandular hairs on the lower leaf surfaces of J. mandshurica estimates useful strategy against herbivory. It may be possible to breed J. regia for better expression of leaf traits such as dense glandular hairs that increase predator populations and efficacy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.252-259
• /
• 2019

Jet engine modulation(JEM) signals are widely used in the field of target recognition along with high-range resolution profile and inverse synthetic aperture radar because they provide specific information of the jet engine. To obtain the number of blades of the jet engine, the chopping frequency proportional to the number of blades must be extracted. In the conventional chopping frequency extraction method, an initial threshold value is defined and a method of detecting the chopping peak is used. However, this detection method takes time depending on the signal due to repetitive detection. Thus, in this study, we proposed to extract the chopping frequency using MUltiple SIgnal Classification(MUSIC) algorithm. We applied the MUSIC algorithm to a given JEM signal to find the chopping frequency and determine the blade number candidates. We also applied the MUSIC algorithm to other chopping frequency extractions to determine the score of the candidate groups. Unlike the conventional detection algorithm, which requires repetitive frequency detection, MUSIC algorithm quickly detects the accurate chopping frequency and reduces the calculation time.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.94-99
• /
• 2021

It was found that mixing patterns suddenly changed at an impeller rotation speed in a dished bottom vessel with dual Rushton turbines. Two isolated mixing regions like doughnuts rings generated at a low rotational speed and three isolated mixing regions generated at a higher speed. This phenomenon was observed at the mixing condition in transition area, where the power number with baffle was the same as that without baffle. We found a phenomenon in which the flow state in a dish-bottom agitation tank equipped with a two-stage Rushton turbine blade changes at a certain rotational speed. In the laminar flow region, the isolated stable donut rings were formed even when the rotational speed was changed, and no specific variation in the mixing pattern was observed. In the transition region, the two isolated thick unmixed donut rings do not change even if the rotation speed is changed in the flat bottom vessel, whereas in the dished bottom vessel, when the rotation speed is 450 rpm, the two isolated thick unmixed donut rings are changed to three isolated thin donut rings and then improved mixing. In the dished bottom vessel, in the range of Re=138~178, the isolated ring-shaped unmixed region appeared in three places and the size was also large. But in the flat bottom vessel, the isolated thick ring-shaped unmixed region appeared in two places in Re=116~176 and the size was also small. It appeared in two places, and the size was also small. The condition in which this phenomenon is observed is a transition region, and it was found that when the baffle plate is attached, the power number starts to increase compared to when the baffle plate is not present. In addition, when the mixing Reynolds number exceeded 300 and a slight turbulence was mixed in the flow state, the disconnection of these flow pattern was resolved and the mixture was completely mixed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.351-358
• /
• 1995

Since summer growth depression of forage crops limits hay production in Korea, it is important to exploit natural resources which are suitable as forage. In the preliminary experiment it was found that Panicum dichotomiflorum Michx. might be utilized as soiling and hay crop. Effects of seed stratificaion, planting date and number of harvestings on fresh and dry yields of Panicum dichotomiflorum Michx. were investigated in 1993 and 1994. Stratification of seed promoted emergence, while seed age decreased emergence. Although fresh yield was closely related with number of plants estabilished per unit area, effect of number of plants per unit area on yield was less at the later stage of growth. Higher cutting height decreased fresh and dry yield at th early stage, but final yields were not influenced by cutting height. Panicum dichotomiflorum Michx. could be harvested 3~4 times beginning 40~50 days after planting and fresh and dry yields were 9~10 tons /10a and 1.4~1.8 tons /10a, respectively. Fresh and dry yields were significantly influenced by growth duration or accumulated temperature between cuttings. Leaf blade ratio was higher at earlier planting and / or harvesting. Contens of crude protein, crude fat and crude ash were 16.32, 24.01 and 11.59%, respectively.

• Structural Engineering and Mechanics
• /
• v.37 no.4
• /
• pp.427-442
• /
• 2011

In fatigue life design of mechanical components, uncertainties arising from materials and manufacturing processes should be taken into account for ensuring reliability. A common practice is to apply a safety factor in conjunction with a physics model for evaluating the lifecycle, which most likely relies on the designer's experience. Due to conservative design, predictions are often in disagreement with field observations, which makes it difficult to schedule maintenance. In this paper, the Bayesian technique, which incorporates the field failure data into prior knowledge, is used to obtain a more dependable prediction of fatigue life. The effects of prior knowledge, noise in data, and bias in measurements on the distribution of fatigue life are discussed in detail. By assuming a distribution type of fatigue life, its parameters are identified first, followed by estimating the distribution of fatigue life, which represents the degree of belief of the fatigue life conditional to the observed data. As more data are provided, the values will be updated to reduce the credible interval. The results can be used in various needs such as a risk analysis, reliability based design optimization, maintenance scheduling, or validation of reliability analysis codes. In order to obtain the posterior distribution, the Markov Chain Monte Carlo technique is employed, which is a modern statistical computational method which effectively draws the samples of the given distribution. Field data of turbine components are exploited to illustrate our approach, which counts as a regular inspection of the number of failed blades in a turbine disk.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.125-132
• /
• 2020

Due to the rapidly increasing number of cars and power generation, environmental pollution caused by fine dust is becoming a serious social problem. Especially fine dust becomes an important issue nowadays. More than 50 countries are suffering from fine dust above the recommended level, and each affected country is studying the measures to reduce fine dust and minimize its occurrence. However, at present, it is difficult to collect fine dust data from the various points with fixed fine dust acquisition drones, and also to collect accurate data due to the influence of rotating blades even in the existing drone method. In this paper, we propose a method for collecting fine dust using drones and a sensing parts architecture and show its effectiveness.

• The korean journal of orthodontics
• /
• v.48 no.4
• /
• pp.245-252
• /
• 2018

Objective: We aimed to perform in-vitro evaluation to compare 1) shear bond strength (SBS), adhesive remnant index (ARI), and color change between self-etched and acid-etched primers; 2) the SBS, ARI and color change between direct and indirect bonding; and 3) the enamel roughness (ER) between 12-blade bur and aluminum oxide polisher debonding methods. Methods: Seventy bovine incisors were distributed in seven groups: control (no bonding), direct (DTBX), and 5 indirect bonding (ITBX, IZ350, ISONDHI, ISEP, and ITBXp). Transbond XT Primer was used in the DTBX, ITBX, and ITBXp groups, flow resin Z350 in the IZ350 group, Sondhi in the ISONDHI group, and SEP primer in the ISEP group. SBS, ARI, and ER were evaluated. The adhesive remnant was removed using a low-speed tungsten bur in all groups except the ITBXp, in which an aluminum oxide polisher was used. After coffee staining, color evaluations were performed using a spectrophotometer immediately after staining and prior to bonding. Results: ISONDHI and ISEP showed significantly lower SBS (p < 0.01). DTBX had a greater number of teeth with all the adhesive on the enamel (70%), compared with the indirect bonding groups (0-30%). The ER in the ITBX and ITBXp groups was found to be greater because of both clean-up techniques used. Conclusions: Direct and indirect bonding have similar results and all the primers used show satisfactory adhesion strength. Use of burs and polishers increases the ER, but polishers ensure greater integrity of the initial roughness. Resin tags do not change the color of the teeth.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.161-169
• /
• 2017

The present study investigated the effect of the rib arrangement and a guide vane for enhancing internal cooling of the blade. Two types of rib arrangements were used in the first and second passage in parallel. Aspect ratio of the channel was 5 and a fixed Reynolds number based on hydraulic diameter was 10,000. The attack angle of rib was $60^{\circ}$, rib pitch-to-height ratio (p/e) was 10, and the rib height-to-hydraulic-diameter ratio ($e/D_h$) was 0.075. The effect of an interaction between Dean vortices and the secondary vortices from the first passage was observed. Overall, the attack angle of rib in the first passage was dominant factor to heat transfer and flow patterns in turning region. Also, the channel with a guide vane showed enhanced heat transfer at the tip surface with reducing flow separation and recirculation.

• Horticultural Science & Technology
• /
• v.16 no.3
• /
• pp.358-360
• /
• 1998

Series of in vitro experiments in Lilium callosum were conducted to investigate efficient multiplication through finding the optimal cultural environment, and organogenic capability of cultural explants, and then to determine the progressive method for enhancing bulblet growth in Lilium callosum scale culture. Twenty-four hr photoperiod was most effective for the growth of bulblet and the formation of other organs. Optimum light intensity for bulblet growth was 2,500~5,000 Lux. When bulbets were subcultured, growth of bulblets were enhanced by removing excessive leaf blade. Number of bulblets per scale increased as mother scale size increased, whereas diameter of bulblet from the small size mother scale increased. Bulblet formation and development was induced when explants were placed above the medium to be exposed to more light.

• Journal of environmental and Sanitary engineering
• /
• v.5 no.1
• /
• pp.1.2-6
• /
• 1990

The purpose of this experiment was to investigate boron deficient symptom of sugar beet. Sugar beet affected by boron deficiency was anatomized and observed by microscope and electron microscope. The sugar beet plants affected onboron deficiencyu with water culture and those of the experimental farm alike contained a small amount of boron. The symptom of boron deficiency began to show dark-brown lines at the ventral suface of the basal part of petiole and then, in the ridge of young leaf, growing point became darkened due to necrosis. The leaf blade was wrinked severely and finally the growth was stunted. The boron deficiency began with necrosis of the epidermis of the ventral surface of the basal part of petiole, and parenchyma under it. Necrosis and disintegration of the ridge of young leaf began to take place and were expanded gradually. Electron microscopic examination of boron deficient sugar beet plants revealed that chloroplasts degenerated, and appeared to contain larger amounts of starch, also observed larger number of osmophilic granules. And they peculiarly were found polyhedral crystals in the certain deficient chloroplasts.