• Asian Journal of Atmospheric Environment
• /
• 제8권4호
• /
• pp.175-183
• /
• 2014

To visually and chemically verify the rainout of soot particles, a model experiment was carried out with the cylindrical chamber (0.2 m (D) and 4 m (H)) installing a cloud drop generator, a hydrotherometer, a particle counter, a drop collector, a diffusing drier, and an artificial soot particle distributer. The processes of the model experiment were as follows; generating artificial cloud droplets (major drop size : $12-14{\mu}m$) until supersaturation reach at 0.52%-nebulizing of soot particles (JIS Z 8901) with an average size of $0.5{\mu}m$-counting cloud condensation nuclei (CCN) particles and droplets by OPC and the fixation method (Ma et al., 2011; Carter and Hasegawa, 1975), respectively - collecting of individual cloud drops - observation of individual cloud drops by SEM - chemical identifying of residual particle in each individual droplet by SEM-EDX. After 10 minutes of the completion of soot particle inject, the number concentrations of PM of all sizes (> $0.3{\mu}m$) dramatically decreased. The time required to return to the initial conditions, i.e., the time needed to CCN activation for the fed soot particles was about 40 minutes for the PM sized from $0.3-2.0{\mu}m$. The EDX spectra of residual particles left at the center of individual droplet after evaporation suggest that the soot particles seeded into our experimental chamber obviously acted as CCN. The coexistence of soot and mineral particle in single droplet was probably due to the coalescence of droplets (i.e., two droplets embodying different particles (in here, soot and background mineral particles) were coalesced) or the particle capture by a droplet in our CCN chamber.

• 한국작물학회지
• /
• 제57권4호
• /
• pp.424-429
• /
• 2012

본 연구는 콩에 함유된 아이소플라본 합성에 관여하는 요인 중 평균기온이 미치는 영향을 구명하고자 수행하였다. 시험품종은 생태형이 다른 일품검정콩, 청자콩, 흑청콩 3품종을 사용하였다. 파종은 5월 15일, 5월 30일 6월 15일 3시기에 재식밀도 $60{\times}15cm$로 하였다. 재배관리는 경기도 콩 표준재배법에 준하여 하였다. 아이소플라본 함량 분석은 개화기후 30일부터 5일 간격으로 수확기까지 채취하여 얻은 시료를 UPLC로 분석하여 얻은 결과는 다음과 같다. 1. 아이소플라본 함량은 시험품종 모두 파종기가 늦을수록 높았다. 2. 아이소플라본 함량은 품종과 파종기에 관계없이 genistein이 가장 높았고, 다음은 daidzein, glycitein 순이었는데, glycitein은 개화기 후 45~55일경 이후에는 뚜렷한 증가를 보이지 않았고, 등숙기간중 기온변화에 안정적이었다. 3. 아이소플라본 중 genistein 함량이 daidzein 함량보다 높아진 시기는 일품검정콩은 개화기 후 50~55일, 청자콩은 개화기 후 40~55일, 흑청콩은 개화기 후 60~65일이었다. 4. 등숙기간중 개화기 후 30일부터 5일 간격으로 평균기온과 아이소플라본 함량과의 관계를 분석한 결과, 일품검정콩에서 genistein은 y=-15.28x+407.9 ($R^2=0.505^*$), 청자콩에서 diadzein은 y=-6.188x-164.5($R^2=0.454^*$)로 유의한 상관관계를, genistein은 y=-11.59x+297.6($R^2=0.545^{**}$)으로 고도의 유의한 상과관계를 보였다. 5. 아이소플라본 함량이 높은 검정콩 생산이 적합한 지역은 등숙기간중 립비대기($R_5$)~생리적 성숙기($R_7$)의 평균기온이 상대적으로 낮은 경기북부지역과 강원도, 충청북도, 경상북도의 내륙지역과 고지대일 것으로 고찰되었다.

• 식물병연구
• /
• 제23권4호
• /
• pp.306-313
• /
• 2017

최근 한국에서 화상병이 발생하였으며, 그 이후로 이병에 대한 박멸프로그램이 가동되고 있다. 본 연구에서는 2가지 항혈청기반 진단 스트립의 국내 분리 화상병균 Erwinia amylovora (Ea)에 대한 특이성과 검출민감도 그리고 현장진단에 적용을 평가하였다. 상업화된 Ea AgriStrip과 본 연구에서 개발한 EB strip은 검정에 사용한 모든 한국 Ea 균주들과 가지검은마름병을 일으키는 대부분의 Erwinia pyrifoliae (Ep)에 양성반응을 보여주었다. 사과나무 가지마름병을 일으키는 Pusedomonas syringae pv. syringae (Pss)의 사용한 모든 균주에 음성반응을 보여주었다. 2 스트립 사이에 검출민감도는 유사하였다. 현장진단의 경우, 2가지 스트립은 화상병이 발생한 모든 과수원에서 채취한 화상병징 세균추출액에 대하여 양성반응을 보였다. 그러나 겨울철에 진행된 한 곳의 화상병 현장진단에서는 화상병병징 세균추출액에 음성반응을 보였다. 또한 2가지 스트립은 가지검은마름병이 발생한 과수원에서 채집한 가지검은마름병징 세균추출액에 대해서 양성반응을 보여주었다. 이상의 결과는 Ea AgriStrip과 EB strip이 화상병 현장진단에 유용할 것으로 암시한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1049-1052
• /
• 2004

In general, contrary to the CRTs with impulsive emission, liquid crystal displays have motion artifacts such as blurring. ghost image, decrease of dynamic CR(contrast ratio), and stroboscopic motion due to hold type driving method. In this paper, to improve motion picture quality of LCDs. impulsive driving method of black data insertion was applied to the OCB mode which is well known for its fast LC response time and wide viewing angle properties. Subject evaluation was carried out with CRT, TN, SIPS(Super IPS). and impulsive driving OCB. Moving picture image quality near CRT was obtained in impulsive OCB driving mode

• 한국가구학회지
• /
• 제26권3호
• /
• pp.207-221
• /
• 2015

Inlay is a high technique of inlaying patterns on the surface of crafts and widely used transcending time and place at various hand crafting area. Inscribed pattern technique using rare materials in the area have been used by the artisans of artistic flair and functionality and its value is also highly regarded from ancient to modern and inherits and is being developed today. Existing inlay technique, however, has not been spread out because it needs craftsman's skill based on the handcraft and inscribed materials are very rare to use. This paper aims to replace natural wood Sanggam materials for traditional furniture patterns such as Samho Jang, Ohho Jang, Seongtoenoe Moon, Gyeopgwinoe Moon and wood inlay text like Soo (Long life), Bok (Luck), Kang (Peace), Ryoung (Relaxed) and gammadion cross pattern. Gathered black, yellow and white color dyed wood using power tools can replace rare natural inlay materials through reliable and standardized supply. Dyed-gathered inlay materials can easily replace wood inlay materials, therefore, attempt to create an improved direction regarding materials and fabrication techniques in order to make traditional or contemporary artistic furniture to be produced.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.18-23
• /
• 2006

This paper presents an operator training simulator for power system restoration against massive blackout. The system is designed especially focused on the generality and convenient setting up for initial condition of simulation. The former is accomplished by using power flow calculation methodology, and PSS/E data is used to set up the initial state for easy setting. The proposed simulator consists of three major components-a power flow(PF), a data conversion(CONV), and, a GUI module. The PF module calculates power flow, and then checks over-voltages of buses and overloads of lines. The CONV module composes a Y-Bus array and a database at each restoration action. The initial Y-Bus array is composed from PSS/E data. A user friendly GUI module is developed including a graphic editor and a built-in operation manual. The maximum processing time for one step operation is 15 seconds, which is adequate for training purpose.

• 한국정보통신학회논문지
• /
• 제14권9호
• /
• pp.2120-2126
• /
• 2010

본 논문은 무선 센서네트워크에서 Zigbee를 적용한 위치추정시스템을 구현 하고자 하였다. 무선 센서네트워크는 유비쿼터스 환경에서 사용자기반의 위치인식 서비스를 제공한다. 위치인식 서비스는 사물이나 사람의 위치를 추정하고 이를 표현하여 제공한다. 본 논문에서 구현된 위치추정시스템은 실내 및 실외를 음영지역 없이 이동노드의 추정이 가능하도록 구현하였다. 실내추정의 경우 RSSI신호를 이용하며 실외추정의 경우 GPS를 연동하여 위치를 추정하였다. 또한 Zigbee를 적용하여 무선 센서네트워크 환경을 구축하고 이동노드의 위치를 제공받아 실시간 위치추정이 가능하도록 하였다.

• Nuclear Engineering and Technology
• /
• 제47권4호
• /
• pp.443-453
• /
• 2015

A hybrid safety injection tank (H-SIT) can enhance the capability of an advanced power reactor plus (APR+) during a station black out (SBO) that is accompanied by a severe accident. It may a useful alternative to an electric motor. The operations strategy of the H-SIT has to be investigated to achieve maximum utilization of its function. In this study, the master logic diagram (i.e., an analysis for identifying the differences between an H-SIT and a safety injection pump) and an accident case classification were used to determine the parameters of the H-SIT operation. The conditions that require the use of an H-SIT were determined using a decision-making process. The proper timing for using an H-SIT was also analyzed by using the Multi-dimensional Analysis of Reactor Safety (MARS) 1.3 code (Korea Atomic Energy Research Institute, Daejeon, South Korea). The operation strategy analysis indicates that a H-SIT can mitigate five types of failure: (1) failure of the safety injection pump, (2) failure of the passive auxiliary feedwater system, (3) failure of the depressurization system, (4) failure of the shutdown cooling pump (SCP), and (5) failure of the recirculation system. The results of the MARS code demonstrate that the time allowed for recovery can be extended when using an H-SIT, compared with the same situation in which an H-SIT is not used. Based on the results, the use of an H-SIT is recommended, especially after the pilot-operated safety relief valve (POSRV) is opened.

• 한국의류학회지
• /
• 제21권8호
• /
• pp.1261-1274
• /
• 1997

Contemporary costume by the 'Deconstruction' from the outside has shown disclosure, destruction, poverty and analysis. The conclusion of this thesis as follows, 1. The Deconstruction of disclosure by infra disclosed the underwear and inner structure outside, which has deconstructed a fixed idea i.e.'underwear must be in outwear', modesty versus immodesty and disclosure versus concealment. 2. The Deconstruction of destruction originated in punk look has rejected traditional manners and utility, at the same time, it has shown the ambivalence i.e. completeness versus incompleteness, making versus destructing by slashes, rips, fringes. 3. The Deconstruction of poverty has appeared as French avangarde mode, little black dress by Chanel, second hand style by hippy, blue jean, granny look, especially Rei Kawakubo's poor look influenced by Zen Aesthetics and post punk. It has looked like old and worn out dress by doing patchwork, dye, decolor, rip, fray, which has shown the decentring by concealing the body than disclosing, rejecting snobbery. 4. The Deconstruction of analysis, seemingly partial and patched is a violation only of our expectation of clothing's unbroken entity though it has looked like a fragment. The completeness and coherence of it is made more evident by its breach, void, and bond like a poetic language. As the result, disclosed, destructed, poor, and analytical costumes has expressed as an escape from the appearance which traditional aesthetic concept had pursued.

• 한국동물위생학회지
• /
• 제35권3호
• /
• pp.207-213
• /
• 2012

The trunk conformations of the Gyeongju Donggyeongi (GD), Korean native dog was measured in the present study. Also, the information of reproductive activity was investigated in GD dogs. A total of 73 dogs were randomly selected out of 121 dogs in the Gyeongju County in July 2010, which were registered by inserting electronic chips in the withers. The hair colors of the GD were white, yellow, black and tiger brindle, the mean withers heights were $45.46{\pm}4.17cm$ and $49.28{\pm}3.56cm$ for female and male dogs, respectively The mean body length to withers height ratios were 117.63% and 116.4% for the female and male dogs. Concerning the reproductive capability of the GD, the mean litter number was $4.6{\pm}1.7$, the optimal mating time was $12.5{\pm}2.3$ days after the rutting season and the mean gestation period was $60.2{\pm}2.8$ days. The results of this study would be useful for compiling the official standard for the adult GD.