• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.465-468
• /
• 2014

The image processing device sold by the market, which increases the comfort of the driver Around-View of the camera. This system while driving or when parked, came about to prevent accidents caused by driver error or disable the visibility of the system. However, it did not spread widely to the driver due to the problem of the high installation cost and complex installation process from the system for easy operation. Due to problems such as first, expensive equipment and second, the development environment is difficult and third, inconvenient installation process, it is not out because of the prohibitively high cost burden and difficult development environment, programmers and operators. I think if this is solved even one problem of this system would be able to access the user are a little more affordable. In this paper The AVM(Around-View Monitoring) system is proposed, the two problems that minimize expensive equipment, the installation process is inconvenient problem of the three aforementioned systems. Solved the problem caused by a lot of the cost by using low-cost USB device, and a rear camera. Was developed to facilitate the installation is possible by considering the inconvenient installation. Reducing the price paid by consumers because of the system.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.3
• /
• pp.336-343
• /
• 2019

In order to investigate the density of seasonal incidence of mosquitoes, a vector of infectious diseases in Jeju region, this study collected mosquitoes using a Black light trap (BL) and Biogents' Sentinel 2 Mosquito Trap (BG), dividing the region into cattle sheds, habitats for migratory birds, and the downtown area, twice a month for 9 months from March through November 2018. Then, this study conducted identification and classification and checked for the presence of Flavivirus using reverse transcription polymerase chain reaction (RT-PCR). As for the mosquito population, 1,847 mosquitoes (six genera, 12 species) were collected. The places where most mosquitoes were collected were copses near craft workshops in habitats for migratory birds and Jungang-dong in the Seogwipo downtown area. For the population, Culex pipiens pallens was the dominant species (76.9%), followed by Aedes albopictus (8.9%). Most of the population was collected in June, followed by August and October. This study conducted a RT-PCR test with 1,847 collected mosquitoes, which were divided into 50 pools if they had Flavivirus. All turned out to be negative. However, the results of the investigation show the presence of Culex tritaineniorhychus, Aedes albopictus, and Anopheles sinensis and can be used as a basis for the comprehensive prevention management of mosquitoes.

• Journal of Internet of Things and Convergence
• /
• v.6 no.4
• /
• pp.33-38
• /
• 2020

It was reported that a mobile application was designed to easily provide natural dyeing information such as natural dye related resources, colors and dyed fabrics in 2007. Since studies on the linkage, application, etc. between natural dye dyeing and IoT are still lacking, diversity of information on the change of dyeing pattern by natural dye dyeing is required. In this study, it was to construct dyeing information by natural dyes, e.g., Lithospermum erythrorhizon, on silk, which has been traditionally used as many fibers in Korea. The extraction of the dye from L. erythrorhizon was carried out under pH4. The dried root of L. erythrorhizon showed dark brownish purple. Silk fabric by a without a mordant typically showed a purple dyed pattern. In the staining by sodium tartrate plus citric acid, silk fabric was stained clear brown. Interestingly, the mordant of iron (II) sulfate, the silk fabric was dyed in a light gray color rather than black. When the mordant of aluminum potassium sulfate was treated with L. erythrorhizon-extracted dye, the results were almost the same as when the mordant was not treated. When the degree of dyeing was evaluated numerically, the treatment of the mordant of potassium dichromate was about 50% darker, and the dyeing by iron (II) sulfate was about 75% darker. These results will be helpful in the study of applying various dye colors using L. erythrorhizon, and it will provide information on dyeing controller and database system construction by dyeing parameters such as dyeing degree, pH concentration, and chromaticity change.

• The Journal of Korean Philosophical History
• /
• no.30
• /
• pp.161-190
• /
• 2010

In Shanghaibochujian-ZhouYi, there are a few special signs in red and black that had never been found in previous ZhouYi texts. Pu Mao Zuo (?茅左), who first sorted out Shanghaibochujian-ZhouYi, classified the signs into six types and explained them in terms of Yin-Yang theory. On the other hand, Li Shang Xin (李尙信) classified the signs into seven types and argued that these signs show that the order of the hexagrams(卦序) in Shanghaibochujian-ZhouYi is completely identical with that of the current version of ZhouYi. Edward L. Shaughnessy also conjectured that the order of the hexagrams(卦序) of Shanghaibochujian-ZhouYi is identical with that of the current version of Zhouyi after his material analysis of the Bamboo slips(竹簡) substance. Kondo Hiroyuki (近藤浩之) is based his interpretation of the order of the hexagrams(卦序) on his own classification of the signs which identified nine types. All these opinions contain some problems and given that the number of the Bamboo slips(竹簡) are very limited, we have to be very careful when we draw a conclusion. Shanghaibochujian-ZhouYi's signs can be possible when we suppose a 64-hexagrams(64卦) system instead of the 8-trigrams(8卦) system, which demands a reexamination of the common view that the 8-trigrams system preceded the 64-hexagrams system.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.133-143
• /
• 2022

In this study, we analyzed the rickshaw (Owned by the Daegu Modern History Museum) by measuring each material. The purpose of the study was to identify the materials in modern cultural assets that utilize a variety of materials in a complex way, and establish basic data for preservation and management. Using portable X-ray fluorescence analyzers (P-XRF), species identification, fiber identification, paint film analysis (microscope observation, SEM-EDS, FTIR) on metal, wood, fiber and paint was carried out. Brass, an alloy of Copper, Zinc and Iron, was measured in the metal parts. Further, wooden parts, such as Oak (Quercus acutissima), Japanese Cedar (Cryptomeria japonica), Bamboo (Bambusoideae). Torreya nucifera (Torreya spp.) were identified in the body. Fiber parts consisted mainly of cotton, but some parts were also made of leather. In terms of paint, rickshaws were applied with multiple layers, using cashew (synthetic paint used in place of lacquer). In sum, the rickshaw body part appeared to overlap with layers of fiber, metal (soild), paint, and colored (black, red) layer.

• Clean Technology
• /
• v.28 no.2
• /
• pp.123-130
• /
• 2022

Nanoparticles are used in various fields such as chemistry, medicine, the environment, and information and communication. With the increasing use of engineered nanomaterials, exposure to nanoparticles is expected to increase in the workplace and the environmental media. However, while nanotechnology industries are expanding, research on the exposure assessment of nanomaterials to humans and the environment is only at a beginning stage. Especially, if nanoparticles with a size of 100 nm or less that are contained in nano-products are released unintentionally, they may pose potential risks to the human body through breathing or skin exposure. Therefore, in this work, the possibility of potential exposure of nanoparticles moving from the laboratory to the office was confirmed, and nanoparticle safety guidelines are proposed. A nano-collector was used to detect nanoparticles in the atmosphere, and through use of a scanning mobility particle sizer it was found that nanoparticle concentrations in the laboratory and the office tended to be similar. On the assumption that nanoparticles attached to a lab-coat move out of the laboratory, a lab-coat to which nanocarbon black was attached was shaken and the concentration of the remaining particles on the lab-coat determined. The results confirmed that sufficient amounts of nanoparticles attached to the lab-coat could move from the laboratory to the office along the path of a researcher; thus, safety guidelines for the handling of lab-coat nanoparticles are required.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.100-116
• /
• 2023

The Sinamsa Temple was built in the late Goryeo Dynasty and a gilt-bronze seated Buddha is enshrined in Geungnakjeon hall in the precinct. Various damages occurred in the gilt layer of the Buddha, such as peeling of the gilt layer and deteriorating gloss. In the study, the conservation conditions of the inside and outside on the statue were accurately investigated, and the making technique was interpreted through the material characteristics and non-destructive diagnosis of the statue. As a result, it is estimated that gold-gilding layer is pure gold, coloration pigment of black is carbon, green is malachite, atacamite and verdigris, red is red lead and cinnabar, respectively. In the deterioration evaluation, peeling, cracking, break out and exfoliation of the gilt layer are confirmed as damages, but the conservation condition is relatively wholesome. However, the gloss of the gilt layer is calculated to be wider in the poorer part than the maintenance part. The ultrasonic velocity of the statue was calculated to be 1,230 to 3,987 (mean 2,608) m/s and showed a relatively wide range. In infrared thermography, peeling was not confirmed, and no special bonding marks were found. In endoscope, some biological damage and corrosion were observed on the surface of the internal metal, and sealed artifacts were identified. Manufacturing technique based on the study, it is considered that the gilt-bronze seated Buddha was cast at once, and the mold was inverted to inject molten metal.

• The Journal of Korean Medical History
• /
• v.35 no.2
• /
• pp.69-82
• /
• 2022

Shin Hong-gyun was born on August 20, 1881. The second son of Shin Tae-geom (申泰儉) in Sangsang-ri, Sinbukcheong-myeon, Bukcheong-gun,Hamgyeongnam-do. His family had been practicing East Asian medicine as a family business. At that time, the families of East Asian doctors who passed the general examination of the Joseon Dynasty had been continuing the East Asian medicine business from generation to generation. Starting with exile in North Gando in 1911, he was located in Wangga-dong, 17 Doo-gu, Changbaek-hyeon. In 1915, he met General Choi Un-san in Bongo-dong, treated the soldiers suffering from cellulitis, and participated in the training process to prepare for the upcoming anti-Japanese war. However, because of a growing difference of opinion with General Choi Woon-san, Shin Hong-gyun left Bono-dong after a year and mets Sorae Kim Jung-geon and joined the founding of Wonjonggyo and Daejindan, an anti-Japanese armed group. It is said that Shin Hong-gyun established many schools in Korean villages destroyed by the Gyeongshin disaster and 14 schools were established under the names of Wonjonggyo and Daejin. After the Japanese established the puppet Manchukuo in 1931, the Manchurian Defense Forces were formed. Koreans and Chinese immigrants to Manchuria worked together to carry out a joint Korean-Chinese anti-Japanese operation towards the Japanese Empire. In 1933, 50 of the Daejindan members joined the Korean Independence Army, and among them, Shin Hong-gyun began to work as a medical doctor in earnest. During an ambush in Daejeonryeong Valley, he could not get a proper meal and, to make matters worse, got wet in the rainy season, so the situation was a challenge in various ways. At this time, Shin Hong-gyun showed his knowledge of herbal medicine, picked black wood ear mushrooms that grew wild in the mountains, washed them in rain water, and provided food to the independence fighters and relieved them of hunger. After the Battle of Daejeon-ryeong, the Japanese army's suppression of the independence forces intensified, and most of the independence fighters escaped from the Chinese army's encirclement and were scattered. Ahn Tae-jin and others led the remaining units and continued the anti-Japanese armed struggle in the forest areas of Yeongan, Aekmok, Mokneung, and Milsan.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.118-135
• /
• 2023

Hanging boards of the Joseon royal court are hung on buildings related to the royal family, such as palaces and Jongmyo Shrine, to show the hierarchy and character of the building. In addition, the manufacturing method and materials are recorded in the royal protocols of the Joseon Dynasty, so it is an important material for studying the manufacturing method and material changes at that time. However, the hanging boards were restored several times due to fire or war, and it is presumed that there is a change in the original form and material of the hanging boards. In particular, many hanging boards of the Joseon royal court were written with calligraphy by kings, so there are many forms consisting of gold letters on a black background. This study tried to analyze the pigments remaining in the letters of 44 of the Joseon royal hanging boards, which are presumed to be gold letters, and to find out the changes in the hanging board production method and materials by referring to the analysis results. The letters of the hanging boards studied were classified according to the current state of the gold pigment and the detected components. As a result of the analysis of character pigments, 24 embossing techniques and 5 intaglio techniques were mainly detected with gold (Au), but 15 embossing techniques were detected with brass (Cu, Zn). Only blue-green substances, not gold pigments, remain in some of the hanging boards in which brass components were detected. A reproduction experiment was conducted because the pigments of the brass component were not recorded in the literature and were not currently used as Dancheong pigments. In the reproduction experiment, it was difficult to confirm the application and use of brass pigments due to the limitations of materials, but it is judged that research on the timing and method of using brass pigments is needed in the future.

• Journal of Platform Technology
• /
• v.12 no.3
• /
• pp.16-26
• /
• 2024

Videos shot underwater are known to have significant color distortion. Typical causes are backscattering by floating objects and attenuation of red colors in proportion to the depth of the water. In this paper, we aim to analyze color correction performance and color distortion patterns for images taken underwater. Backscattering and attenuation caused by suspended matter will be discussed in the next study. In this study, based on the DeepSeeColor model proposed by Jamieson et al., we verify color correction performance and analyze the pattern of color distortion according to changes in water depth. The input images were taken in the US Virgin Islands by Jamieson et al., and out of 1,190 images, 330 images including color charts were used. Color correction performance was expressed as angular error using the input image and the correction image using the DeepSeeColor model. Jamieson et al. calculated the angular error using only black and white patches among the color charts, so they were unable to provide an accurate analysis of overall color distortion. In this paper, the color correction error was calculated targeting the entire color chart patch, so an appropriate degree of color distortion can be suggested. Since the input image of the DeepSeeColor model has a depth of 1 to 8, color distortion patterns according to depth changes can be analyzed. In general, the deeper the depth, the greater the attenuation of red colors. Color distortion due to depth changes was modeled in the form of scale and offset movement to predict distortion due to depth changes. As the depth increases, the scale for color correction increases and the offset decreases. The color correction performance using the proposed method was improved by 41.5% compared to the conventional method.