• 제목/요약/키워드: Bite plane

검색결과 83건 처리시간 0.023초

전악수복환자에서 Shilla system을 이용한 교합평면 재구성 증례 (Reestablishing the occlusal plane in full mouth rehabilitation patient, using Shilla system)

  • 양민수;방몽숙;박상원;임현필;윤귀덕;양홍서
    • 대한치과보철학회지
    • /
    • 제51권1호
    • /
    • pp.33-38
    • /
    • 2013
  • 교합평면은 시상면적인 치열궁 형태를 나타내는 것으로, 악구강계를 구성하는 요소의 하나인 교합을 형태적으로 구성한다. 본 증례에서는 생체의 정중 시상면에 대한 수평, 측방좌표를 교합기상에 재현하여 상하악 치아 및 결손부 치조제에 대한 좌우 동적인 위치관계 얻기 위해 Shilla system (Hamans, Tokyo, Japan)을 이용하여 교합평면을 재구성 하였다. 본 증례의 환자는 41세의 남자 환자로 상악 전치부 10본금속-도재 고정성국소의치 파절 및 탈락과 전반적인 치료를 주소로 내원하였다. 임상 검사, 방사선 검사, 모형분석을 통해 임플란트 식립을 동반한 완전구강회복술을 하기로 결정하였다. Gothic Arch device (Centrofix; AmannGirrbach GmbH, Germany)를 이용하여 악간관계를 채득하고 마운팅 후, Shilla system을 이용하여 기존 교합평면을 평가, 분석하여 진단 납형을 제작하였다. 이를 토대로 방사선 스텐트를 제작하여 임플란트 식립하였고, 진단 납형을 이용하여 임시수복물을 제작하였다. 임시 수복물의 형태 및 교합 양식을 재현하기 위해 맞춤 전방유도판을 제작하고, 교차 마운팅을 시행하였으며 최종 수복물은 지르코니아 코핑을 이용한 완전 도재관으로 제작하였다. 이상과 같이 전악수복환자에서 진단과 치료 과정에서 Shilla system을 이용하여 적절한 심미적, 기능적 수복 결과를 얻을 수 있었다.

수직고경이 붕괴된 골격성 III급 부정교합자의 악교정 수술 치험례 (Orthognathic surgery on Skeletal Class III patiens with collapsed vertical dimension: case report)

  • 최윤경;김용덕;박수병;김용일;김성식;손우성
    • 구강회복응용과학지
    • /
    • 제32권1호
    • /
    • pp.70-79
    • /
    • 2016
  • 치주 질환이나 치아 우식으로 인해 구치부 치아가 상실된 환자들은 대합치 정출 및 인접치 경사가 발생하여, 교합평면의 붕괴나 수직 고경의 상실로 하악골 위치 변화가 나타날 수 있다. 특히 악교정 수술 환자에서, 이런 증상이 나타날 경우 하악과두가 관절와 내에서 안정화된 위치에 존재하여 술 후 안정성을 높일 수 있도록, 술 전 수직 고경을 재설정하는 치료가 필요하다. 따라서 보철, 교정, 구강악안면외과 등 다분야에서 진단 및 치료 계획에서부터 원활한 의사소통을 통한 양호한 치료 결과를 얻을 수 있도록 협력하는 것이 중요하다.

하악골변위(下顎骨變位)가 저작근(咀嚼筋)의 수종성분(數種成分)의 변동(變動)에 미치는 영향(影響)에 관(關)한 실험적(實驗的) 연구(硏究) (THE INFLUENCES OF MANDIBULAR DISPLACEMENT ON THE SEVERAL COMPONENTS OF THE MASSETER MUSCLE IN RATS)

  • 우상민
    • 대한치과보철학회지
    • /
    • 제14권1호
    • /
    • pp.55-65
    • /
    • 1976
  • The influences of the mandibular displacement and valium administration on the muscular activity were observed by spectrophotometric analysis of glycogen, glucose, G-6-P, lactate, pyruvate, ATP, phosphocreatine ana protein. Experimental animals were divided into three groups; the first was the mandibular displacement group, the second was valium administered group and the third was the mandibular displacement and valium admministered group. In mandibular displacement group, the high inclined plane with a gap of 2.5mm to 3.0mm between the upper and lower incisors was created by setting the silver crowns on the lower incisors. By creating such a high inclined plane, the bite was opened and the mandible was dispalced posteriorly. In valium administered group, 5mg/kg body weight of valium was administered intraperitoneally every day until the animal was sacrificed. Results were as follows: I) The body weight of all experimental rats was decreased in the beginning of experimental periods. The body weight of the mandibular displacement group showed the similar increasing rate as the control group from 15 days of experimental period. 2) The superficial masseter muscles of the mandibular displacement group appeared to be decreased it's functional activity at 36hrs, 60hrs and 96hrs of experimental periods as revealed by the decrease of various metabolites studied in this experiment. From 96hrs of experimental periods, the contents of those metabolites tended to increase up to the control level. 3) The superficial masseter muscle of 2nd group showed the decreased value of all metabolites at until 60hrs and the values were recovered to almost the same as the control at 168hrs. 4) Glycogen and G-6-P contents induced by mandibular displacement plus valium administration, showed longer duration of the decreased value than 1st group. And the decrease of glucose and pyruvate contents induced by mandibular displacement at 36hrs and 60hrs of experimental periods was enhanced by valium administration. However, the contents of lactate in 3rd group were decreased continuously until the end of experiment.

  • PDF

수직적으로 긴 안모의 두부방사선계측학적 특징 (Characteristics of Skeletodental Pattern in High Angle Cases)

  • 김상철;강경화;이경환
    • 대한치과교정학회지
    • /
    • 제28권6호
    • /
    • pp.937-946
    • /
    • 1998
  • 전치부 개교를 동반하는 수직적으로 긴 안모는 임상교정에서 치료하기 어려운 증례중 하나이다. 이런 증례의 특징을 찾기 위한 많은 시도가 있었으나 골격 및 치성 요소에 대한 개별 파악이 이루어지지 않음으로써 일관된 설명 없이 혼돈 만 초래하게 되었을 뿐이다. .수직적으로 긴 안모의 두부방사선계측학적 륵징을 확인하기 위하여 Sn-GoGn 각에 따라 구분된 109개의 치료 전 두부방사선사진 (35 수직군, 37 평균군, 37 수평군)을 분석하여 비교한 결과 다음과 같은 결과를 발견하였다. 수직적으로 긴 안모일수록 전안모고경, 특히 하전안모고경이 증가하며 후안모고경은 짧아지고, 모든 치조골, 특히 상악에서 의 두께가 깊어진다. 또한 모든 골격적 각계측항목이 커지는데 특히 lower genial angle의 상관성이 컸다. 한편 상악 전치는 점점 설측경사되었고 하악 전치는 순측경사되는 경향을 보였다.

  • PDF

전치부 반대교합 아동의 비강통기도에 관한 연구 (A STUDY ON NASAL RESPIRATORY PATENCY IN THE GROWING CHILDREN WITH ANTERIOR CROSSBITE)

  • 안순찬;서정훈
    • 대한치과교정학회지
    • /
    • 제22권1호
    • /
    • pp.179-203
    • /
    • 1992
  • This study was designed to analyze nasal respiratory patency and its correlation with skeletal components in growing children with anterior crossbite. The subjects consisted of 40 control patients, 24 nose breathers with anterior crossbite and 18 mouth breathers with anterior crossbite. The mean age was 11.4 years in the control group, 10.1 years in nose breathing group and 9.5 years in mouth breathing group. The results were as follows, 1. In anterior cross bite group, and nasal respiratory airflow rates (N.R.A.R.) was significantly lower than that of control group regardless of nasal decongestants application. 2. The N.R.A.R. of mouth breathers with anterior crossbite in male group was significantly lower than that of mouth breathers, but increased to the level of control group after nasal decongestants application. But in female group, the N.R.A.R. was significantly lower in mouth breathing group at both conditions. 3. Mouth breathing group showed smaller anterior vertical nasal cavity height (ANS-ANS'), lower upper anterior facial height ratios (N-sp'/N-Me) and higher maxillary occlusal plane ratios (OL-ML/ML-NL) than those of nose breathing group with anterior crossibte. 4. Items showing nasal height (ANS-ANS', PNS-PNS'), anterior upper facial height (N-sp') was were strongly correlated with N.R.A.R. at 150 pascal in inspiration. But item showing maxillary occlusal plane ratios (OL-ML/ML-NS) was negatively correlated with N.R.A.R. at 150 pascal in inspiration. 5. There were forward tongue position in mouth breathing group, but it was not significantly correlated with N.R.A.R. at 150 pascal in inspiration.

  • PDF

측모두부방사선사진을 이용한 상악 중첩 방법의 비교연구 (ARATIVE STUDY OF MAXILLARY SUPERIMPOSITION METHODS ON A LATERAL R NTGENOGRAPHIC CEPHALOMETRY)

  • 진영임
    • 대한소아치과학회지
    • /
    • 제25권1호
    • /
    • pp.197-208
    • /
    • 1998
  • This study was carried out to compare the amount of the maxillary bone remodeling and tooth displacement in each three maxillary superimposition methods, Ricketts, Best-fit, Structural method. Forty cases of the lateral cephalometric radiographs from 27 boys and 13 girls who had been treated to correct anterior cross-bite were selected for the study. The initial radiographs were taken at about 8-year-old and the second radiographs were taken in about 3.3 years later. Followings were the results: 1. With the Structural method, backward movement was shown in PNS, while forward movement was observed in ANS and point A. With the Ricketts method, however, all structures were shown significant backward movement comparing with Structural method(P<0.05). With the Best-fit method, the amount of horizontal movement was similar to that of the Structural method(P>0.05). 2. The palate seemed to be moved downward with Structural method, but there was no measured downward remodeling on nasal floor with Ricketts and Best-fit method(P<0.05). 3. Comparing with Structural method, Ricketts and Best-fit method significantly underestimated the eruption of the teeth by 20% to 30% (P<0.05). 4. The Structural method showed the anteroinferior rotation (43%) and posteroinferior rotation(57%) of the palatal plane, while the Best-fit method showed mostly anterosuperior rotation(87%), but no change was found in the Ricketts method. 5. With the Structural method, there was a statistically significant correlation between the amount of the rotation of the palatal plane and that of N-S line(r=0.86). 6. The measured angles of the long axis of the incisors and molars showed no significant difference in each 3 methods(P>0.05).

  • PDF

상계해석법을 이용한 평면변형 열간 판압연공정해석 (Upper Bound Analysis of Plane Strain Hot Strip Rolling Process)

  • 문영훈;천명식;이준성
    • 대한기계학회논문집A
    • /
    • 제20권8호
    • /
    • pp.2468-2479
    • /
    • 1996
  • An upper bound solution is obtained to perform the process analysis of hot strip rolling process. The material flows within the roll bite at various geometries and frictional conditions are obtained from finite element analysis and the typical flow pattern which is necessary to determine the kinematically admissible velocity field is assumed. From the kinematically admissible velocity field, the upper bound energy is calculated and the rolling load, angle of neutral point and forward slip ratio at various operational conditions are obtained from upper bound energy. The process analysis of above mentioned parameters at various operational conditions have provided valuable information which is hard to obtain during rolling operation and the predicted ranges of quantitive values from these analyses lie whthin the bound of actual operational data.

최대교두감합위 및 하악 전방운동 시의 교합접촉 및 교합유도 양상에 관한 분석 (Analysis of occlusal contact and guidance pattern during maximal intercuspal position and protrusive movement)

  • 김지연;김강현;노관태;김형섭;우이형;배아란
    • 대한치과보철학회지
    • /
    • 제51권3호
    • /
    • pp.199-207
    • /
    • 2013
  • 연구 목적: 저작 및 하악 운동시 발생되는 치아접촉은 치열의 보존, 하악의 안정과 보철 수복과정에 있어서 중요하다. 이에 한국인의 20-30대 성인을 대상으로 최대교두감합위에서의 치아접촉점의 위치 및 교합유도양상과 교합유도치의 분포를 분석하여 알아보고자 한다. 연구 대상 및 방법: 29명의 성인을 대상으로 하악의 최대교두감합위에서의 치아접촉점의 위치와 분포 및 전방운동시 교합접촉양상을 shimstock foil (Whaledent, Langenau, Germany), T-Scan III (Tekscan Inc., Boston, MA, USA), polyvinylsiloxane registration material (Genie Bite, Sultan Healthcare, Hackensack, NJ, USA)을 이용하여 측정하였다. 측정시 자세는 직립위로 Frankfurt horizontal plane과 지면이 수평이 되도록 앉게 하였으며 접촉이 재현될 때까지 수 차례 반복한 후 3회씩 측정하였다. 최대교두감합위에서 세가지 방법 간의 통계적 유의성을 비교하기 Fisher's Exact Test (R-General Public License, ver. 2.14.1)를 이용하였고, 전방 운동시 Pearson's Test를 통해 통계 검증하였다(${\alpha}=.05$). 결과: 최대교두감합위에서의 치아 접촉 양상을 shimstock foil, T-Scan III, polyvinylsiloxane registration material로 측정시 전치부, 소구치부, 구치부 모두에서 접촉하는 경우가 대부분이었으며, shimstock 사용시 약51%의 최대교두감합위는 전치부 접촉에서 일어났다. Shimstock foil과 T-Scan III를 사용하여 전방운동 측정시 중절치의 접촉이 가장 많이 일어났다. 결론: 최대교두감합위에서 실제 모든 치아의 접촉이 이루어지지 않는 경우가 있었으며 따라서 구치부에서 전치부를 보호해 주고 있음을 확인할 수 있었다. 또한, 전방운동 시 전치부의 치아접촉은 과도한 구치부의 치아접촉을 방지해 전치부가 구치부를 보호해 주고 있었다. 따라서 교합 재구성 시에는 이러한 상호 보호 교합에 대한 고려가 필요하다.

제 III급 부정교합 환자들의 각 치료법에 따른 측모두부방사선사진 계측치의 비교 (Cephalometric difference according to the differential treatment methods in Class III malocclusion;)

  • 백형선
    • 대한치과교정학회지
    • /
    • 제27권2호
    • /
    • pp.197-208
    • /
    • 1997
  • 제 III급 부정교합 환자의 치료를 위해서는 각 환자의 문제점들과 상태를 다양한 진단방법들을 동원하여 분석한 후에 가장 적절한 치료방법을 선택하여야 한다. 초진시에 치성 또는 기능성 또는 골격성인 원인들의 감별이 분명한 증례에서는 치료계획 수립이 큰 문제가 없지만, 감별이 모호한 증례에서는 많은 어려움을 경험하게 된다. 이에 저자는 각 치료방법을 적용하여 치료한 제III급 부정교합 환자 482명 (남;253,여 ;229)을 대상으로 치료방법에 따라 네 군으로 분류하였다. D군은 가철성 교정장치나 악기능장치를 사용하여 치료한 115명(남;64, 여;51), A군은 악정형장치로 치료한 210명 (남;111, 여 ;99), B군은 고정식 교정장치로 Camouflage 하여 치료한 63명 (남;30, 여 ;33), C군은 악교정 수술로 치료한 94명(남;48, 여;46)이었다. 초진시에 촬영한 측모두부방사선사진에서 전후방, 수직적, 치성, 악골의 형태학적인 계측항목들을 선정하여 각 군에서 측정한 계측치의 평균값 및 표준편차를 구하였고 네 군간의 유의성 여부를 검정하여 아래와 같은 결과를 얻었다. 1. SNA각과 Nasion Perpendicular Plane에서 A점까지의 거리는 네 군간에 유의한 차이가 없었으며, SNB, Wits, Nasion Perpendicular Plane에서 B점까지의 거리, Facial angle, Facial convexity, APDI의 값은 C,A,B,D군의 순이었지만 A군과 B군간에는 유의한 차이가 없었다. 2. 전안면고경, 후안면고경, 하전안면고경의 값이 남자에서는 C,B,A,D의 순으로 유의성 있는 차이를 나타냈으며, 여자에서는 C와 B군간에는 유의한 차이가 없게 나타났다. 3. 남자에서 전두개저에 대한 하악체 길이의 비율, 하악체의 길이와 Symphysis의 길이는 C,B,A,D순으로 나타났으나 B군과 A군사이에는 유의한 차이가 없었고, 여자에서는 Ramus height, 하악체 길이, 전두개저에 대한 하악체 길이의 비율이 네군에서 유의한 차이를 나타냈고 Symphysis의 길이는 C군과 B군 사이에서는 유의한 차이가 없었다. 4. 상악전치 치축은 C,B,A,D순으로 크게 나타났으며 네 군간에서 유의한 차이가 나타났다. 5. Nasolabial angle의 값은 C,A,B,D순으로 작게 나타났으나 유의한 차이는 C와 A,B,D군 간에서만 나타났다.

  • PDF

강소성 대변형 유한요소법을 이용한 판재 압연연구 (Study on the Sheet Rolling by a Rigid-Plastic Finite Element Method Considering Large Deformation Formulation)

  • 김동원;홍성인
    • 대한기계학회논문집
    • /
    • 제15권1호
    • /
    • pp.145-153
    • /
    • 1991
  • 본 연구에서는 Toh가 개발하여 stretchforming에 응용한 강소성 대변형 이론 을 압연문제에 적용하여 강소성 대변형 유한요소 프로그램을 개발하는데 있다.