• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.515-520
• /
• 1996

Since the conventional Westinghouse DNB (Departure from Nucleate Boiling) protection logic is implemented on analog circuits, the logic must be very simple. However, if the DNB protection logic is implemented in a digital processor, a little bit of complexity can be allowed to increase the thermal (or operation) margin. The Westinghouse OTΔT DNB protection logic heavily restricts the operation region by applying the same logic for a full range of pressure in order to maintain its simplicity. In this work, the different DNB protection logic is used for several regions of pressure. The proposed method is applied to Yonggwang 1&2 nuclear power plants and it is calculated that the improved OTΔT can have 5.07% percent more thermal margin than the conventional OTΔT trip logic.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1163-1167
• /
• 2018

The selective encryption scheme for canonical Huffman codes using the inversion of bit values is proposed. The symbols are divided into blocks of a certain size, and each symbol in the block is compressed by canonical Huffman coding. Blocks are determined to be sent in the original code or encrypted form. The encryption block inverts the values of the whole bits, and bits of block that do not encrypt are not inverted. Those compressed data are transmitted with the encryption information. It is possible to decrypt the compressed data on the receiving side using the encryption information and compressed data.

• ETRI Journal
• /
• v.45 no.2
• /
• pp.277-290
• /
• 2023

This paper proposes a method that can reduce the complexity of a system matrix by analyzing the characteristics of a pseudoinverse matrix to receive a binomial frequency division multiplexing (BFDM) signal and decode it using the least squares (LS) method. The system matrix of BFDM can be expressed as a band matrix, and as this matrix contains many zeros, its amount of calculation when generating a transmission signal is quite small. The LS solution can be obtained by multiplying the received signal by the pseudoinverse matrix of the system matrix. The singular value decomposition of the system matrix indicates that the pseudoinverse matrix is a band matrix. The signal-to-interference ratio is obtained from their eigenvalues. Meanwhile, entries that do not contribute to signal generation are erased to enhance calculation efficiency. We decode the received signal using the pseudoinverse matrix and the removed pseudoinverse matrix to obtain the bit error rate performance and to analyze the difference.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.10-18
• /
• 2010

The polar transmitter is applied to the narrowband communication systems such as GSM (Global System for Mobile Communications), EDGE (Enhanced Data Rates for GSM Evolution), and GPRS (General Packet Radio Service). To apply polar transmitter for the wideband communication like OFDM (Orthogonal Frequency Division Multiplexing) where the high PAPR (Peak-to-Average Power Ratio) problem occurs, this paper proposes a windowed-sinc function based PAPR reduction scheme. The proposed algorithm mitigates the effect of excessive suppression due to successive peaks or relatively high peaks of the signal. The BER (Bit Error Rate) and EVM (Error Vector Magnitude) performances are measured for various window types and lengths. The simulation results demonstrate that the proposed algorithm achieves significant improvement in terms of BER and PAPR reduction performance with similar spectrum performance to the conventional peak windowing scheme.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.576-582
• /
• 2001

The Multi-Band Excitation(MBE) speech coder uses a different approach for the representation of the excitation signal. It replaces the frame-based single voiced/unvoiced classification of a classical speech coder with a set of such decision over harmonic intervals in the frequency domain. This enables each speech segment to be a mixture of voiced and unvoiced, and improves the synthetic speech quality by reducing decision errors that might occur on the frame-based single voiced and unvoiced decision process when input speech is degraded with noise. The IMBE-LP, improved version of MBE with linear prediction, represents the spectral information of MBE model with linear prediction coefficients to obtain low bit rate of 2.4 kbps. In this Paper, we proposed a variable rate IMBE-LP vocoder that has lower bit rate than IMBE-LP without degrading the synthetic speech quality. To determine the LP order, it uses the spectral band information of the MBE model that has something to do with he input speech's characteristics. Experimental results are riven with our findings and discussions.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.9-16
• /
• 2007

In this paper, the Bit Error Ratio (BER) performances of the D8PSK modulation schemes for VDL Mode-2 are analyzed according to the matched and unmatched cases of the channel filters. The carrier frequency and phase offset effects are analyzed with unmatched case. Generally in digital transmission techniques, the Root Raised Cosine filters which are used as channel filters are applied to both sides at transmitter and receiver in order to achieve no ISI, but in VDL Mode-2, the Raised Cosine Filter is used only in transmission section and the receiver section uses general low pass filter, therefore we could not achieve ISI reduction effects but can have better spectrum quality. From the simulation results, the error probability is increased slightly (1~2dB) with use of un-matched channel filter, we got the conclusions that carrier phase offset do not effect to bit error ratio, but the frequency offset effect is so serious. Finally, narrow band D8PSK modulation signals are generated by the use of Digital Up-Converter and then its features are compared with analog modulator.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.11
• /
• pp.572-580
• /
• 2007

Wireless sensor networks are sensing, computing and communication infrastructures that allow us to monitor, instrument, observe, and respond to phenomena in the harsh environment. Generally, the wireless sensor networks are composed of many deployed sensor nodes that were designed to be very cost-efficient in terms of production cost. For example, UC Berkeley's MICA motes have only 8-bit CPU, 4KB RAM, and 128KB FLASH memory space. Therefore, sensor operating systems that run on the sensor nodes should be able to operate efficiently in terms of the resource management. In this paper, we present a dynamic threads stack management scheme for space-constrained and multi-threaded sensor operating systems. In this scheme, the necessary stack space of each function is measured on compile-time. Then, the information is used to dynamically allocate and release each function's stack space on run-time. It was implemented in Nano-Qplus sensor operating system. Our experimental results show that the proposed scheme outperforms the existing fixed-size stack allocation mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.810-823
• /
• 2005

The transmission of duplicate packets provides a great loss-resilience without undue time-delay in the video transmission over packet loss networks. But this method generally deteriorates the problem of traffic congestion because of the increased bit-rate required for duplicate transmission. In this paper, we propose an efficient packetization and duplicate transmission of video packets. The proposed method transmits only the video signal with high priority for each video macroblock that is quite small in volume but very important for the reconstruction of the video. The proposed method significantly reduces the required bit-rate for duplicate transmission. An efficient packetization method is also proposed to reduce additional packet overhead which is required for transmitting the duplicate data. The duplicated high priority data of the Previous video slice is transmitted as a Piggyback to the data Packet of the current video slice. It is shown by simulations that the proposed method remarkably improves the packet loss-resilience for video transmission only with small increase of redundant duplicated data for each slice.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1765-1772
• /
• 2015

In the underwater acoustic communication channels, multipath reflection become the cause of obstacle. Generally, equalizer has been applied to overcome these problems. In this paper, the method was proposed to optimize tap-length of decision feedback equalizer using genetic algorithm. After inputting feed-forward filter length and feed-back filter length as genetic information of the genetic algorithm, it optimize tap-length using BER(bit error rate) calculation in accordance with object function. The object function consist of decision feedback equalizer and BER calculation. For the purpose of BER calculation in the object function, the method was proposed to optimize the tap-length of decision feedback equalizer with genetic algorithm using preamble signals. As a result of experiments, the optimized BER is 0.0355 for signals which were received through a 25m receiver and which were applied to calculate BER merely using preamble signals in object function. When all data were used to calculate BER in object function, the optimized BER is 0.0215.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1577-1582
• /
• 2013

In this paper, we have analyzed the performance of MIMO (Multi-Input Multi-Output) underwater acoustic communication by using the acquired data via the experiments in water tank. First of all, in the pursuit of this aim, we have measured the channel transfer characteristics at several transceiver locations. The transmitted signal was modulated by QPSK(Quadrature Phase Shit Keying) and the received signal was recovered through the detector that contains the zero forcing equalizer. A maximum 30~40 ms delay was appeared because of physically closed water tank environment that has the harsh multi-path transmission conditions. In result of experiment, even though the bit error rate showed comparatively large when $2{\times}2$ MIMO system with two transmitters and receivers was considered. However, we confirmed it has approximately 15% enhanced performance compared with SISO (Single-Input Single-Output) system.