• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2559-2561
• /
• 2002

This paper presents a systematic method of probing channel characteristics and communication reliabilities of home PLC (power line communication) network applied to the Internet accessed control of home appliances. The effects of the three performance deterioating factors, i.e., additive noise, channel attenuation, and intersymbol interference, can be systematically measured by applying the channel probing waveform in the frequency range from 100kHz to 450kHz. The agreement between the derived probability of bit error and the measured probability of bit error supports the validity of the proposed approach of probing home power line channel characteristics. The experimental results performed with the constructed test-bed applying the proposed channel probing method also support the feasibility of commercially deploying the PLC modem installed home appliances and their services for the Internet accessed home automation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.3983-4001
• /
• 2015

Exact average bit error probability (BEP) expressions for mobile-relay-based mobile-to-mobile (M2M) cooperative networks with incremental decode-and-forward (IDF) relaying over N-Nakagami fading channels are derived in this paper. The average BEP performance under different conditions is evaluated numerically to confirm the accuracy of the analysis. Results are presented which show that the fading coefficient, the number of cascaded components, the relative geometrical gain, and the power allocation parameter have a significant influence on the average BEP performance.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.3
• /
• pp.52-60
• /
• 1983

This paper presents a complete analysis for the derivation of the probability of error for a fast (or multiple-hops per bit) frequency hopping spread spectrum system employing binary FSK modulation and noncoherent reception in the presence of partial-band noise jamming and thermal noise. The worst-case error rate performances were obtained numerically and presented as a function of E /N with L as a parameter, where E /N and L are the signal bit energy-to-jamiming density ratio and the number of hops per bit, respectively.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.103-108
• /
• 1998

The increase in the capacity of the digital magnetic recording systems inevitably causes severe intersymbol interference (ISI) and nonlinear distortions in the digital magnetic recording channel. In this paper, to cope with severe ISI and nonlinear distortions a neural decision feedback equalizer (NDFE) is applied to the digital magnetic recording channel - partial erasure channel model. In the performance comparison of bit error probability (or bit error ratio : BER) between the NDFE and the conventional decision feedback equalizer (DFE) via computer simulations. It has been found that as nonlinear distortions increase the NDFE has more SNR (SIgnal-to-Noise Ratio) advantage over the conventional DFE. In addition, in spite of the same recording density, as nonlinear distortions are increased, NDFE has the better performance of BER and the greater stability over conventional DFE.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.9-15
• /
• 1999

In this paper, we propose a bit synchronizer which is suitable for frequency hopping systems. The proposed bit synchronizer is an ADPLL in which the digital loop filter is combined with an error symbol detecting circuit. Suppressing the tracking process, when hop mute and impulse noises are detected, improves the performance of the digital loop filter and enhances the probability of the frequency hopping system. Simulation results demonstrate an improved performance of the proposed bit synchronizer compared with existing ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1A
• /
• pp.36-43
• /
• 2008

In this paper, we propose an optimal relay selection scheme for decode-and-forward relaying systems. The optimal relay selection minimizes the number of time slots used to relay source's signal and maximizes an end-to-end signal-to-noise ratio. However, decode-and-forward relaying systems require additional overhead for the optimal relay selection. Assuming independent and identically distributed Rayleigh fading channels, we provide exact and closed-form expressions for the outage probability of capacity and the bit error rate for decode-and-forward relaying systems with the optimal relay selection. It is shown that the analytic results are perfectly matched with the simulated ones. When the numbers of relay nodes are 2, 4, and 8, and the numbers of time slots for overhead are 1, 2, and 4, respectively, the proposed system achieves 1 dB, 2 dB, and 3 dB gains at 1% bit error rate, respectively, and 0.5 dB, 4 dB, and 12 dB gains at 1% outage probability for 1 bps/Hz, respectively, over the conventional decode-and-forward relaying system.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.351-363
• /
• 2016

This paper investigates the performance of interference-limited two-way transmission protocols in the Rayleigh fading channels. New lower bound of outage probability and approximate expression of bit error rate (BER) for three-phase two-way relaying (3P-TWR) protocol are derived in closed-form. These expressions are valid for arbitrary signal-to-noise ratio values, numbers of co-channel interferers and amajority of modulation formats employed in the practical system. Then a comparative study is developed for the performance of three two-way transmission protocols, i.e., direct transmission (DT) protocol, two-phase two-way relaying (2P-TWR) protocol and 3P-TWR protocol based on the asymptotic expressions of outage probability and BER. On the basis of the theoretical results, the thresholds on the strength (variance) of direct channel and target rate for the relative performance of different protocols are obtained and the effect of interferences at the terminal and relay on the relative performance is analyzed. The results present key insights on how to choose proper two-way transmission protocol with the knowledge of fading channels, required date rate and modulation format to optimize the system performance in the practical interference-limited scenarios. Simulation results are presented to validate the theoretical analysis.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.4
• /
• pp.219-228
• /
• 2020

A CubeSat platform has become a popular choice due to inexpensive commercial off-the-shelf (COTS) components and low launch cost. However, it requires more power-efficient and higher-data rate downlink capability for space applications related to remote sensing. In addition, the platform is limited by the size, weight and power (SWaP) constraints as well as the regulatory issue of licensing the radio frequency (RF) spectrum. The requirements and limitations have put optical communications on promising alternatives to RF communications for a CubeSat platform, owing to the power efficiency and high data rate as well as the license free spectrum. In this study, we analyzed the performance of optical downlink communications compatible with CubeSat platforms in terms of data rate, bit error rate (BER) and outage probability. Mathematical models of BER and outage probability were derived based on not only the log-normal model of atmospheric turbulence but also a transmitter with a finite extinction ratio. Given the fixed slot width, the optimal guard time and modulation orders were chosen to achieve the target data rate. And the two performance metrics, BER and outage data rate, were analyzed and discussed with respect to beam divergence angle, scintillation index and zenith angle.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.56-60
• /
• 2005

To calculate the probability of bit error of UWB communication systems, the exact expression of multiple access interference is essential. So far, in many researches, MAI has been modeled by the Gaussian Approximation, which leads to the huge errors. And there are some tries to obtain the exact model fot the MAI but they have some problems such as long calculation time. We introduce the simple expression to calculate the probability of error of an UWB-TH system with BPSK. The multiple access interference is explained by the characteristic function method combined with the Gaussian approximation. It allows us to easily and fast calculate the bit error rate of an UWB-TH system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.375-380
• /
• 2009

Bit error rate(BER) performance of each bit for hierarchical M-ary phase shift keying(H-MPSK) modulation scheme is changed according to the phase parameters. Thus, a method to find the phase parameters appropriate to the requests of the system is needed. In this paper, we propose a method to obtain the phase parameters from an approximate approach of BER for H-MPSK and verify a validity of the proposed method through the previously provided expression for analyzing an exact error probability of H-MPSK.