• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.298-299
• /
• 2004

We propose and theoretically analyze multi-functional integrated optical device based on figure-eight shaped birefringent Sagnac loops. Our analysis shows that the propose device exhibit many unique features which allows it to operate as a tunable high-Q comb filter with a good channel isolation, and the intensity transmission of the filter can be varied from zero to 100 percent.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.405-409
• /
• 2009

A polarization-independent multiwavelength-switchable fiber filter is proposed based on a polarization beam splitter and fiber coupler, which can function as a polarization-independent transmission or reflection-type interleaving filter. The proposed filter consists of a polarization beam splitter and a Sagnac birefringence loop composed of a 50:50 coupler, high birefringent fibers, and two quarter-wave plates. In the proposed filter, a transmission-type interleaver with a channel isolation > 18 dB or a reflection-type one with a channel isolation of ${\sim}3$ dB, whose channel spacing and switching displacement were 0.8 and 0.4 nm in common, respectively, could be obtained. A channel interleaving operation could be performed by the proper control of waveplates within the Sagnac birefringence loop.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1995-1997
• /
• 2007

In this paper we propose a wavelength-switchable fiber ring laser that employs a polarization-dependent fiber band stop filter. The fiber filter was fabricated by inscribing a long-period fiber grating on a high birefringent fiber. Dual-wavelength switching operation was accomplished by controlling the rotatable linear polarizer which rotated the polarization plane of the light circulating through the fiber laser cavity. The amplitude variation of both laser lines was measured to be less than 0.5 dB and the signal-to-amplified spontaneous emission ratio was more than 55 dB.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.450-455
• /
• 1997

A pulsed Ti:sapphire laser with a Z-folded cavity, which was pumped by a freqeuncy-doubled Nd:YAG laser, was developed. It shows 120 nm wavelength tuning range from 740 nm to 860 nm with 90 nm FWHM under a pumping energy of 3 mJ with 18% output coupler. Using a birefringent filter, the effective efficiency was improved about 10 times compare to without a birefringent filter. The output energy obtained was $\365mu$Jwith 4 nm FWHM. And the wavelength tuning range was broadened to about 160 nm within an output energy fluctuation of $\pm$10%.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.143-144
• /
• 2008

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.60-65
• /
• 2002

The purpose of this study is to measure and compare the output power characteristics and optical gain for selenium vapour laser depending on the He gas purity. The purity of the He gas was improved with a special He-filter. During the measurement the individual wavelengths were selected with a birefringent filter. The result shows that compared with those of laser without He-filter, the output-coupling power and small signal gain of laser with He-filter increase in the most of the lines. Especially, the output-coupling power and small signal gain for the strong lines (497.6 nm, 499.3 nm, 506.9 nm, 517.6 nm, 522.8 nm, 530.5 nm), blue(460.4 nm, 464.8 nm) and red(644.4 nm 649.1 nm) lines lies notably higher.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.6-13
• /
• 2014

In this paper, a multiwavelength-switchable first-order fiber flexible filter is newly proposed, which is based on a polarization-diversity loop. The proposed filter consists of a polarization beam splitter, three half-wave plates(HWPs), and two high birefringent fibers(HBFs). The proposed filter has a good flexibility in adjusting relative angular difference between the principal axes of two HBFs by inserting an HWP between two HBFs. The first-order flat-top or narrow band transmission spectra and the zeroth-order transmission spectra, which had a channel spacing of ~0.8nm, could be obtained by controlling the three HWPs, and, in particular, each of them could also be interleaved. In addition, zeroth-order transmission spectra with a channel spacing of ~0.8nm could be flexibly converted into those with a channel spacing of ~0.4nm through the control of three HWPs, and also be interleaved. The transmission characteristics of the proposed filter was theoretically analyzed and experimentally verified.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.292-297
• /
• 2003

A diode-pumped single-mode Nd:YV $O_4$ green laser was developed. Frequency doubling of the laser was achieved by using an intracavity KTP generated green beam (532 nm). By comparing the diode laser spectrum with absorption spectrum of the Nd:YV $O_4$ crystal, we found optimal operating temperature of the diode laser. From output power measured for various mirror curvatures and cavity lengths, we found the optimal matching of TE $M_{00}$ mode with the pump beam gives the best efficiency. When the pump power was 1.9 W, 80 ㎽ of TE $M_{00}$ mode green beam was obtained. We tried to get a single longitudinal mode lasing as the fluctuation of the laser power was caused by the shift of longitudinal modes and the beating between the modes. We tested the intracavity etalon method and birefringent filter method for single mode operation. The etalon method resulted in the best single mode output power of 60 ㎽. The power fluctuation of the single-mode laser was reduced to 1/10 of that of the multi-mode laser.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.47-51
• /
• 1997

A Cr:LiSAF laser pumped by semiconductor lasers was constructed. The pumping laser was a high-power semiconductor laser (SDL 7432-H1) of wavelength 674 nm and maximum power of 500 mW. The laser crystal was a Cr:LiSAF of plano-Brewster shape with 3% Cr3+ion concentration and 3 mm in length. The plane facet of the crystal was coated to get the maximum transmittance of pupmping laser and maximu reflection over the 800 - 880 nm bandwidth. V-shaped resonator was used to compensate the astigmatism induced by the crystal. The output power of the Cr:LiSAF laser was 19.4 mW at the pumping power of 290 mW. The wavelength was tuned by a steep dive-angled birefringent filter from 840 nm to 880 nm and the characteristics of the filter were agreed well with a theory.

• Journal of The Korean Astronomical Society
• /
• v.26 no.2
• /
• pp.103-114
• /
• 1993

We have analyzed a set of high resolution photographic line profiles of a Zeeman sensitive Fe I $\lambda$ 6302.5 line taken with the Universal Birefringent Filter over a single round sunspot (SPO 5007) at the Sacramento Peak Solar Observatory. The observed spectra recorded on films are traced by PDS and the traced densities are converted to relative intensity by means of IRAF. The Stokes I and V profiles are then constructed by adding together and subtracting from each other the left and right handed circular polarizations, respectively. The reduced I and V profiles are analyzed by means of the coarse analysis(Auer et al.(1977), Skumanich and Lites(1987)) with the use of inversion technique. It is found that the umbral field strength is about 3000 gauss and the field distribution follows closely the emperical model proposed by Wittmann(1974).