• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.529-532
• /
• 1999

본 연구에서는 유기 전기 발광 소자에서 녹색 발광층으로 사용되는 terbium(Tb) complexes와 europium(Eu) complex, 정공 수송층으로 사용되는 TPD (N, N\`-diphenyl-N,\`(3-methylphenyl)-1, 1\`biphenyl-4, 4\`-diamine), 그리고 전자 수송층으로 사용되는 Alq$_{3}$ (trois(8-hydroxyquinolino)aluminum), Bebq$_2$들의 Uv/Vis. 홉광도와 PL 스펙 트럼과 같은 광학적 특성을 조사하였으며 또한 이러한 물질들을 이용하여 다양한 종류의 유기 전기 발광 소자를 제작하고 제작된 소자들의 전류밀도-전압-조도 등의 전기 . 광학적 특성을 조사하였으며, 그 결과 다 음과 같은 결곤을 얻을 수 있었다. 다양한 ligand를 갖는 Tb complex들의 경우에도 EL 스펙트럼의 파장대 (wavelength)는 546nm~548nm의 녹색 발광을 하는 것을 알 수 있었고, 제작된 소자 중에서 Tb(ACAC)$_3$(Phen) 을 발광충으로 하고, TPD, 그리고 Bebq$_2$를 각각 정공 수송층, 전자 수송 층으로 한 소자가 가장 낮은 구동 전압을 갖는다는 것을 확인하였으며 logJ-logV 특성에서도 모든 전계 구간에서 이러한 구조의 소자가 가장 높은 전류밀도를 나타냈으며 저 전계 구간에서 전류밀도 타이가 가장 컸다. 소자의 전류밀도와 휘도의 관계에 있어서는 제작된 네 종류의 소자 중 Tb(ACAC)3(Cl-Phen)를 발광층으로 하고 TPD, 그리고 Bebq2를 각각 정공 수송층, 전자 수송 층으로 한 소자가 가장 휘도가 우수한 것을 알 수 있었다. 또한 red (europium complex), green (terbium complex), 그리고 blue (TPD) 색깔을 나타내는 유기 재료를 사용하여 한 소자에서 백색 소자를 제작하여 cyclic voltametric방법을 이용하여 각 유기 물질들의 에너지 준위를 조사하여, 각각의 소자들을 에너지 밴드 다이어그램(energy band diagram)으로 자세히 설명하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.380-380
• /
• 2010

Currently, organic light-emitting diodes (OLEDs) have been proven of their readiness for commercialization in terms of lifetime and efficiency. In accordance with emerging new technologies, enhancement of light efficiency and extension of application fields are required. Particularly inverted structures, in which electron injection occurs at bottom and hole injection on top, show crucial advantages due to their easy integration with Si-based driving circuits for active matrix OLED as well as large open area for brighter illumination. In order to get better performance and process reliability, usually a proper buffer layer for carrier injection is needed. In inverted top emission OLED, the buffer layer should protect underlying organic materials against destructive particles during the electrode deposition, in addition to increasing their efficiency by reducing carrier injection barrier. For hole injection layers, there are several requirements for the buffer layer, such as high transparency, high work function, and reasonable electrical conductivity. As a buffer material, a few kinds of transition metal oxides for inverted OLED applications have been successfully utilized aiming at efficient hole injection properties. Among them, we chose 2 nm of $WO_3$ between NPB [N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] and Au (or Al) films. The interfacial energy-level alignment and chemical reaction as a function of film coverage have been measured by using in-situ ultraviolet and X-ray photoelectron spectroscopy. It turned out that the $WO_3$ interlayer substantially reduces the hole injection barrier irrespective of the kind of electrode metals. It also avoids direct chemical interaction between NPB and metal atoms. This observation clearly validates the use of $WO_3$ interlayer as hole injection for inverted OLED applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.421-421
• /
• 2010

적색과 녹색 유기발광소자 보다 청색 유기발광소자는 상대적으로 발광 효율이 낮고 색 순도가 낮으며 수명이 짧은 이유로 유기발광소자를 이용한 전색 디스플레이 패널 구현에 많은 어려움이 있다. 이 문제를 해결하기 위하여 청색 유기발광 소자의 발광 효율을 향상하기 위한 방법으로 기존의 제작되는 불순물이 첨가된 단일 발광 호스트층을 이용한 유기발광소자와는 다르게 불순물이 첨가된 혼합된 발광 호스트층으로 구성된 발광 기능층을 가진 유기발광소자의 전기적 성질과 광학적 성질에 대한 연구를 하였다. 본 연구에서는 1.3-Bis(carbazol-9-yl)benzene 인광 호스트 유기화합물과 5%의 3-Tert-butyl-9,10-di(naphtha-2-yl)anthracene 형광 호스트 유기화합물을 혼합된 발광 기능층으로 적용하고 8%의 bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl-l) iridiumIII 인광 불순물을 첨가한 청색 유기발광소자와 5%의 4,4'-Bis[4-(diphenylamino)styryl] biphenyl (BDAVBi) 형광 불순물을 첨가한 청색 유기발광소자를 제작하여 전기적 성질과 광학적 성질을 비교하였다. 형광 불순물인 BDAVBi를 첨가하여 제작된 청색 유기발광소자는 전류밀도 $20\;mA/cm^2$에서 5.78 cd/A의 발광 효율을 구현하였다. 대역폭이 큰 인광 호스트 물질에서 형성된 엑시톤이 효율적으로 대역폭이 상대적으로 작은 형광 호스트로의 에너지 전달이 일어나고 형광 호스트에서 형성된 엑시톤이 대역폭이 더 작은 형광 불순물로의 에너지 전달이 효율적으로 전달 됨을 알 수 있다. 인광 호스트에서 형성된 엑시톤이 중간 과정을 거치지 않고 바로 형광 불순물로의 에너지 전달이 형성되어 주입된 캐리어가 기존의 소자보다 에너지 전달 과정을 거쳐 다수의 엑시톤이 소멸하지 않고 발광에 기여하여 상대적으로 전류가 작게 흐르고 다량의 엑시톤이 외부로 추출되어 효율이 증가하였다. 전계 발광 스펙트럼 분석에서 메인 피크가 467 nm 영역에서 형성되지만 불순물에 의한 부 피크가 491 nm 영역에서 형성되어 시각계 곡선과 중첩되는 영역을 추가로 형성하여 효율이 증가하게 되는 것을 알 수 있었다. 그러므로 불순물이 첨가된 혼합된 호스트 발광층을 적용한 유기발광소자는 높은 발광 효율을 가지는 청색 유기발 광소자 디스플레이 패널 제작 가능성을 제공하고 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.449-449
• /
• 2010

유기발광소자(organic light-emitting diodes, OLEDs)는 저공정비용, 경량화, 가용성 및 대면적화 등의 장점으로 조명 분야와 디스플레이 분야로의 응용 가능성으로 인해 크게 주목을 받아 왔다. 이러한 OLED 소자의 고효율, 고휘도 및 저소비전력 등을 구현하기 위해서는 전극으로부터 전하 주입 층으로 효율적인 전하 주입이 요구된다. 즉, 각 전극의 폐르미 준위로부터 전하 전도준위대로의 전하주입 장벽이 없어야 한다. 본 연구에서는 홀 주입장벽이 없는 정공주입 층으로 $MoO_x$(molybdenum oxide)가 도핑된 NPB(N, N'-diphenyl-N, N'-bis(1-naphthyl)-1,1'-biphenyl-4,4'-diamine) 층을 사용하여 hole-only 소자를 제작하고 전류-전압 특성을 통해 양극으로부터 홀주입 층으로의 hole-ohmic 특성을 고찰했다. 또한, 전자 주입장벽이 없는 전자주입 층으로 $C_{60}$(fullerene)/LiF(lithum fluoride)의 이종 층을 사용하여 electron-only 소자를 제작하고 음극으로부터 전자주입 층으로의 전자 ohmic 특성을 조사했다. 또한, 전극으로부터 전하주입 층으로 ohmic 특성을 더 자세히 이해하기 위하여 전하주입 층의 자외선 광방출 스펙트럼(ultraviolet photoemission spectra)을 조사했다. 한편, glass/ITO/$MoO_x$-doped NPB (x%: x=0,25, 50 및 75; 5nm)/NPB (63nm)/$Alq_3$ (37nm)/$C_{60}$ (5nm)/LiF (1nm)/Al (100nm)로 구성된 all-ohmic OLED 소자의 발광특성은 $MoO_x$의 도핑 농도가 25%이상일 때 최적의 특성을 보여줬다. 이러한 현상은 정공주입 층에서 p형 도핑 농도의 증가에 따른 정공 농도의 증가에 기인한다. 또한 $MoO_x$의 도핑 농도의 증가에 따라 정공주입 층의 new gap state와 전극의 페르미 준위의 pinning에 기인한다. 25%의 $MoO_x$을 가진 OLED소자는 7.2V의 낮은 전압에서 $58300 cd/m^2$의 높은 휘도를 보여줬다.

• Korean Journal of Microbiology
• /
• v.32 no.2
• /
• pp.126-131
• /
• 1994

The pchABCD genes in Pseudomonas sp. DJ-12 speciyin degradation o 4-chlorobiphenyl(4CB) were cloned in Eschericia coli. The cloned cells of E. coli CU1 and CU101 showed to produce 2,3-dihydroxybiphenyl (2,3-DHBP) from 4-chlorobiphenyl by dechlorination, as Pseudomonas so. DJ-12 produced 2,3-DHBP from both biphenyl and 4CB. In particular, E. coli CU101 transformed with the recombinant plasmid of pCU101 revealed dechlorination activity to produce 2,3-DHBP from 4CB without production of 4-chlorobenzoic acid. Therefore, the pcbAB genes (2.2 kb in size) cloned from the chromosome of Pseudomonas sp. DJ-12 were found to have dechlorination activity on 4CB to produce 2,3-DHNP.

• Biomolecules & Therapeutics
• /
• v.3 no.4
• /
• pp.322-326
• /
• 1995

General pharmacology of LB20304, a quinolone antibiotic, were examined in terms of general behaviour, cardiovascular, and central nervous system. LB20304 at oral dose of 2,000 mg/kg did not induce significant behavioural changes in mice. In contrast with ciprofloxacin, LB20304 at dose of 20 mg/kg, iv. did not show any observable effects on the blood pressure in rats. Displacement of [$^3$H]muscimol binding to the rat brain synaptic membranes was measured. LB20304 was shown to be about five times less potent than ciprofloxacin in specific GABA receptor binding. Drug interaction between LB20304 and 4-biphenyl acetic acid, an active metabolite of fenbufen, was assessed in mice by measuring convulsion and/or subsequent death. A single oral pretreatment with 4-BPA at 400 mg/kg increased the incidence of convulsion and death after oral administration of ciprofloxacin at the doses of 25, 50, and 100 from zero of five to three of five, two of five, and four of five, respectively, whereas LB20304 alone or combination with 4-BPA caused neither convulsions nor death at the doses of 12.5, 25, 50, and 100 mg/kg, respectively. Quinolones-induced epileptogenic activities were assessed by a direct intracerebral injection of test articles. The CD$_{50}$ values (nmole) are as follows; 169.47, 35.36, 105.29, and 88.67 for LB20304, ciprofloxacin, of loxacin, and lomefloxacin, respectively. From these data, LB 20304 at therapeutic doses seems to be much more safe than any other quinolones tested.d.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.9-15
• /
• 2012

We prepared a series of aromatic liquid crystals (LCs) based on wholly aromatic ester units with the reactive end group methyl maleimide by means of melt condensation method, and the resulting LCs were thermally crosslinked to produce liquid crystalline thermoset (LCT) films. The synthesized LCs and LCTs were characterized with Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermomechanical analysis (TMA), and polarizing optical microscopy (POM) with a hot stage. The glass transition temperature ($T_g$) and coefficient of thermal expansion are strongly affected by the mesogen units in their main chain structures. The $p$-substituted biphenyl LC was found to have the highest thermal property value.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.637-642
• /
• 1996

Preparation and properties of potential CVD (Chemical Vapor Deposition) precursors for the TiO2, a major component of the perovskite materials such as PT, PLT, PZT, and PLZT were investigated. Reactions between β-diketones and TiMe3, formed in situ failed to produce stable Ti(β-diketonate)3 complexes but a stable purple solid, characterized as (OTi(BPP)2)2 (BPP=1,3-biphenyl-1,3-propanedione) was obtained when BPP was used. Several new Ti(Oi-Pr)2(β-diketonate)2 complexes with aromatic or ring substituents were synthesized by the substitution reaction of Ti(OiPr)4by β-diketones and characterized with 1H NMR, IR, ICP, and TGA. Solid complexes such as Ti(Oi-Pr)2(BAC)2 (BAC=1.-phenyl-2,4-pentanedione), Ti(Oi-Pr)2(BPP)2, Ti(Oi-Pr)2(1-HAN)2 (1-HAN=2-hydroxy-1-acetonaphthone), Ti(Oi-Pr)2(2-HAN)2 (2-HAN=1-hydroxy-2-acetonaphthone), Ti(Oi-Pr)2(ACCP)2 (ACCP=2-acetylcyclopentanone), and Ti(Oi-Pr)2(HBP)2 (HBP=2-hydroxybenzophenone) were found to be stable toward moisture and air. Ti(Oi-Pr)2(ACCP)2 and Ti(Oi-Pr)2(HBP)2 were proved to have lower melting points and higher decomposition temperatures. However, these complexes are thermally stable and pyrolysis under an inert atmosphere resulted in incomplete decomposition. Ti(Oi-Pr)2(DPM)2 (DPM=dipivaloylmethane) and Ti(Oi-Pr)2(HFAA)2 (HFAA=hexafluoroacetylacetone) were sublimed substantially during the thermal decomposition. Pyrolysis mechanism of these complexes are dependent on type of β-diketone but removal of Oi-Pr ligands occurs before the decomposition of β-diketonate ligands.

• International Journal of Oral Biology
• /
• v.44 no.3
• /
• pp.115-123
• /
• 2019

Among the environmental chemicals that may be able to disrupt the endocrine systems of animals and humans are polychlorinated biphenyls (PCBs), a chemical class of considerable concern. PCB consists of two six-carbon rings linked by a single carbon bond, and theoretically, 209 congeners can form, depending on the number of chlorines and their location on the biphenyl rings. Furthermore, 3,3',4,4',5-pentachlorobiphenyl (PCB126) exposure also increases nitric oxide production and nuclear factor kappa-light-chain-enhancer of activated B cells binding activity in chondrocytes, thus contributing as an initiator of chondrocyte apoptosis and resulting in thymic atrophy and immunosuppression. This study identified whether cardiac and immune abnormalities from PCB126 were caused by the Kv1.3 and Kv1.5 channels. PCB126 did not affect either the steady-state current or peak current of the Kv1.3 and Kv1.5 channels. However, PCB126 right-shifted the steady-state activation curves of human Kv1.3 channels. These results suggest that PCBs can affect the heart in a way that does not block voltage-dependent potassium channels including Kv1.3 and Kv1.5 directly.

• Biomolecules & Therapeutics
• /
• v.29 no.4
• /
• pp.392-398
• /
• 2021

In this study, we determined the effect of 24 different synthetic 4-benzylpiperidine carboxamides on the reuptake of serotonin, norepinephrine, and dopamine (DA), and characterized their structure-activity relationship. The compounds with a two-carbon linker inhibited DA reuptake with much higher potency than those with a three-carbon linker. Among the aromatic ring substituents, biphenyl and diphenyl groups played a critical role in determining the selectivity of the 4-benzylpiperidine carboxamides toward the serotonin transporter (SERT) and dopamine transporter (DAT), respectively. Compounds with a 2-naphthyl ring were found to exhibit a higher degree of inhibition on the norepinephrine transporter (NET) and SERT than those with a 1-naphthyl ring. A docking simulation using a triple reuptake inhibitor 8k and a serotonin/norepinephrine reuptake inhibitor 7j showed that the regions spanning transmembrane domain (TM)1, TM3, and TM6 form the ligand binding pocket. The compound 8k bound tightly to the binding pocket of all three monoamine reuptake transporters; however, 7j showed poor docking with DAT. Co-expression of DAT with the dopamine D₂ receptor (D₂R) significantly inhibited DA-induced endocytosis of D₂R probably by reuptaking DA into the cells. Pretreatment of the cells with 8f, which is one of the compounds with good inhibitory activity on DAT, blocked DAT-induced inhibition of D₂R endocytosis. In summary, this study identified critical structural features contributing to the selectivity of a molecule for each of the monoamine transporters, critical residues on the compounds that bound to the transporters, and the functional role of a DA reuptake inhibitor in regulating D₂R function.