• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.4
• /
• pp.133-137
• /
• 2001

In this research, we synthesized various photo-crosslinkable polyimide based polymers. The control of pretilt angles for a nematic liquid crystal (NLC) using the photodimerization method on the photopolymers was studied. A good thermal stability of the photopolymers was measured by thermogravimetric analysis (TGA) measurement until 450C. High pretilt angles of the NLC were otained by polarized UV exposure on the photopolymers containing biphenyl (BP), decyl (de), and cholesteryl (chal) groups, respectively. However, low pretilt angles of the NLC were measured by polarized UV exposure on the photopolymers containing fluorine and chalcone groups. The high NLC pretilt angles generated are attributable to the biphenyl and alkyl moieties, and the photodimerized chalocone group of the photopolymers. Additionally, good voltage-transmittance and response time characteristics were observed by UV exposure on the photopolymers.

• Proceedings of the KIEE Conference
• /
• 2006.10b
• /
• pp.171-174
• /
• 2006

본 연구에서 새로 합성한 적색 도판트 Red-1을 Physical vapor Deposition (PVD) 법을 이용하여 다층구조의 유기 발광 다이오드를 제작하였다. 적층된 유기물 층으로 정공주입층은 4,4',4"-tri [2-naphthyl(phenyl)amino]triphenylamine(2-TNATA) 정공 수송층으로4-4bis [N-(1-napthyl-N-phenyl-amino)biphenyl] (NPB)를 사용하였으며 전자 수송층은 tris (8-quinolinolato)-aluminum ($Alq_3$), 발광층에서의 host 재료로 사용한 물질은 $Alq_3$. 4,4'- N-N'-dicarba zole-biphenyl (CBP), 게스트재료는 Red-1, 정공저지층으로 2,9-dimethyl-4, 7-diphenyl -1 10-phen antroline (BCP), 전자 주입층으로는 lithiumquinolate (Liq)를 사용하여 보다 향상된 전기적, 발광특성을 보이는 소자를 제작하였다. 전하를 주입하는 전극으로 일함수가 큰 투명전극인 ITO (indium-tin-oxide)를 양전극으로, Al을 음전극으로 사용하였다. 그리하여, 발광층 내에서의 host재료 $Alq_3$와 CBP와의 energy transfer의 관점에서 그 특성을 연구하였다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1997.04a
• /
• pp.118-118
• /
• 1997

Solid dispersions were used to increase the dissolution rate of biphenyl dimethyl dicarboxylate (DDB) in water, with the ultimate goal of optimizing its bioavailability when incoporated into pharmaceuticals. Carriers used were Kollidon 30, Kollidon VA 64, 2-hydroxypropyl-${\beta}$-cyclodextrin (HPCD), sodium salicylate or sodium benzoate. DDB solid dispersions were prepared at drug to carrier proportions ranging from 1 : 5 to 1 : 20 (w/w) by solvent evaporation method. DDB tablets (7.5 mg) were prepared by compressing the powder mixture composed of solid dispersions, lactose, corn starch, crospovidone and magnesium stearate using a single-punch press. DDB capsules (7.5 mg) were prepared by filing the mixture into empty hard gelatin capsules (size #1). Dissolution studies of DDB from powdered solid dispersions, tablets and capsules were performed in 900 $m\ell$ of water at 100 rpm and 37$^{\circ}C$ by the paddle method. The dissolved amount was assayed by HPLC and expressed as the mean(%)of three determinations.

• Microbiology and Biotechnology Letters
• /
• v.24 no.6
• /
• pp.657-663
• /
• 1996

Pseudomonas sp. P20 isolated from the polluted environment is capable of degrading biphenyl and 4-chlorobiphenyl. The pcbABCD genes responsible for degradation of biphenyl and 4-chlorobiphenyl were cloned using pBluescript SK(+) from the chromosomal DNA of Pseudomonas sp. P20 to construct pCK1 and pCK102, harbouring pcbABCD and pcbCD, respectively. The 2, 3-DHBP dioxygenase gene, pcbC, was cloned again from pCK102 by using pKT230 which is known as a shuttle vector and pKK1 hybrid plasmid was constructed. The E. coli KK1 transformant obtained by transforming the pKK1 into E. coli XL1-Blue showed 2, 3-DHBP dioxygenase activity. The specific 2, 3-DHBP dioxygenase activity of E. coli KK1 was similar to that of the E. coli CK102, but much higher than those of the natural isolates, Pseudomonas sp. DJ-12 and Pseudomonas sp. P20.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.496-498
• /
• 2008

We have developed green phosphorescent organic light-emitting diodes (OLEDs) with high quantum efficiency. Wide-energy-gap material, 1,1-bis[(di-4-tolylamino) phenyl]cyclohexane (TAPC), with high triplet energy level was used as a hole transporting layer. Electrophosphorescent devices fabricated using TAPC as a hole-transporting layer and N,N'-dicarbazolyl-4,4'-biphenyl (CBP) doped with fac-tris(2-phenylpyridine) iridium [Ir(ppy)3] as the emitting layer showed the maximum external quantum efficiency ($\eta_{ext}$) of 19.8 %, which is much higher than the devices adopting 4,4'-bis[N-(1-naphthyl)-N-phenyl-amino]biphenyl (NPB) (${\eta}B_{ext}=14.6%$) as a hole transporting layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.7
• /
• pp.595-599
• /
• 2001

The mechanisms of pretilt angle generation for a nematic liquid cystal (NLC) using a photodimerization method with obliquely polarized UV exposure on the various new photo-crosslinkable polymer were studied. A good thermal stability of all the photo-crosslinkable polymers was obtained by thermogravimetric analysis (TGA) measurement until 450$\^{C}$. High pretilt angle of the NLC was observed by polarized UV exposure on the three kinds of the photo-crosslinkable polymers containing biphenyl(BP), decyl(de), and cholesteryl(chol) group, respectively. However, the low pretilt angle of the NLC was measured by obliquely polarized UV exposure on the two kinds of the photo-crosslinkable polymers containing fluorine and chalcone group. Consequently, the high NLC angle generated is attributable to the biphenyl and alkyl moieties, and photo-dimerized chalcone group of the photopolymer.

• ALGAE
• /
• v.27 no.1
• /
• pp.63-70
• /
• 2012

Algae are sensitive to a wide range of pollutants, and are effective bioindicators in ecotoxicity assessments. Here, we evaluated the sub-lethal sensitivity of the marine dinoflagellate Cochlodinium polykrikoides upon exposure to copper (Cu), lead (Pb), bisphenol A (BPA), and Aroclor 1016 (polychlorinated biphenyl, PCB). Toxic effects were assessed by observations of the reduction in cell counts and chlorophyll a levels after exposure to each toxicant. C. polykrikoides displayed dose-dependent, sigmoidal responses when exposed to the tested chemicals. $EC_{50}$-72 h values for Cu, Pb, BPA, and PCB were 12.74, 46.70, 68.15, and $1.07mg\;L^{-1}$, respectively. PCB, which is an endocrine-disrupting chemical, was the most sensitive, proving its toxic effect on the dinoflagellate. This study provides baseline data on the toxic effects of commonly used heavy metals and endocrine-disrupting chemicals to a marine dinoflagellate.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4377-4381
• /
• 2011

In this study, real-time and label-free methods for monitoring the enzymatic reaction of urease, which releases ammonia through the hydrolysis of urea in an aqueous solution, were developed using a liquid crystal (LC)-based pH sensor. Nematic liquid crystal 4-cyano-4'-pentylbiphenyl (5CB), doped with 4'-pentyl-biphenyl-4-carboxylic acid (PBA), exhibited a shift in optical appearance from bright to dark when it was in contact with ammonia generated from the enzymatic reaction between urease and urea. This optical change was attributed to the anchoring transitions of LCs caused by hydrophobic interactions between the tails of deprotonted PBA ($PBA^-$) molecules and the LCs at the aqueous/LC interface. This novel technique holds great promise for the sensitive detection of urease along with its substrates and inhibitors.

• Korean Journal of Microbiology
• /
• v.38 no.4
• /
• pp.245-245
• /
• 2002

Catabolic pathways for the degradation of various aromatics by Sphingomonas yanoikuyae Bl are intertwined, joining at the level of substituted benzoates, which are further degraded vita ring cleavage reactions. The mutant strain EK497, which was constructed by deleting a large DNA region containing most of the genes for biphenyl, naphthalene, m-xylene, and m-toluate degradation, was unable to grow on all of the aromatics tested except for benzoate as the sole source of carbon and energy.S. yanoikuyae EK497 was found to possess only catechol ortho-ring cleavage activity due to deletion of the genes for the meta-cleavage pathway. Wild-type S. yanoikuyae Bl grown on benzoate has both catechol orthoand meta-cleavage activity. However, m-xylene and m-toluate, which are metabolized through methylbenzoate, and biphenyl, which is metabolized through benzoate, induce only the meta-cleavage pathway, suggesting the presence of a substrate-dependent induction mechanism.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.5
• /
• pp.430-434
• /
• 2001

We synthesized a new photo-crosslinkable polymer (polyimide (PI)-chalcone-biphenyl (BP)) and liquid crystal (LC) aligning capabilities for nematic (N) LC with obliquely polarized UV exposure on a photo-crosslinkable polymer were studied. The high pretilt angle in NLC was obtained by polarized UV exposure on a PI-Chal-BP surface for 3 min. The high pretilt angle generated in NLC is attributed to the biphenyl moieties and the photo-dimerized chalclone group of a photopolymer. Also, good thermal stability of a PI-Chal-BP were obtained by thermogravimetric analysis (TGA) measurement until 450$^{\circ}C$. Finally, good voltage-transmittance curves and response time were observed by UV exposure on a PI-Chal-BP surface for 3min.