• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.301-307
• /
• 2018

In this research work, synthesis of sugarcane bagasse/zinc aluminium biocomposite and apple peel/zinc aluminium biocomposite and their application for removal of Reactive Red-241 and Acid Orange-7, respectively, was studied using various parameters. At pH 2 the sorption was the highest for both dyes. The trend showed that the dye sorption declined by decreasing the biocomposite dose and enhanced by increasing the dye concentration and temperature. Equilibrium was achieved at 60 minutes for Reactive Red-241 onto sugarcane bagasse/zinc aluminium biocomposite and 90 minutes for Acid Orange-7 onto apple peel/zinc aluminium biocomposite.The research data was good fitted to pseudo-2nd-order kinetic model and Langmuir isotherm. FT-IR analysis was used to confirm the biosorption of the selected dyes at the surface of biosorbent through various binding sites. Surface morphology modification of both biocomposites before and after biosorption was inspected through SEM. Crystallinity of biocomposite was examined through XRD analysis. It was implied that sugarcane bagasse/ zinc aluminium biocomposite and apple peel/ zinc aluminium biocomposite are good adsorbents for dyes elimination from aqueous solutions.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.249-254
• /
• 1999

The biosorption and desorption of Cd were carried out using brown marine algae, known as the good biosorbent of heavy metals. The content of alginate bound to light metals could be changed by the physical and the chemical pretreatment of Sargassum fluitans biomass. The Cd uptake was independent of the alginate content. In case of protonated biomass, Cd uptake was the lowest because the alginic acid of biomass was dissolved to cadmium solution during the biosorption. The maximum Cd uptake of Sargassum biomass was ranged from 79 mg/g to 139 mg/g. In case of raw biomass, the higher the alginate content of biomass, the higher was the Cd uptake. 100% of Cd and light metals sorbed in the biomass were eluted at 0.1N HCI(pH 1.1). However, the elution efficiency in $CaCl_2$ and $Ca{(NO_3)}_2$solution was varied by the concentration, the solid to liquid ratio and the pH of calcium solution. The distribution coefficient between Cd and protons in the desorption solution at pH ranged from 1.6 to 2.9 was observed on the constant stoichometric coefficient(1.3).

• Journal of Energy Engineering
• /
• v.27 no.3
• /
• pp.36-40
• /
• 2018

Climate change is one of the major issues in both the developed and developing world. Greenhouse gas (GHG) emission is one of the implications for climate change. It is increasing rapidly. Although the emission is much less when compared to the rest of the world, Ethiopia has also faced this global issue. The major source for GHG emission in Ethiopia is agriculture. Therefore, the agriculture sector has to be given more attention in Ethiopia. To overcome the problem, Climate-Resilient Green Economy (CRGE) strategy has been initiated. One way of executing this target is to create a sustainable and environmentally friendly pathway to use agricultural byproducts. Sugarcane is one of the major plants in Ethiopia. Its byproducts are bagasse, molasses, and press mud. Since it is a waste product, it is economical and creates a sustainable and green environment by reducing GHG emissions. Sugarcane byproducts have versatile applications like as fuel, as cement replacing material, as a mitigation for expansive soils, as biosorbent for the treatment of water and wastewater and also as a wood material. However, Ethiopia has not used this byproduct massively as it is readily available. This paper reviews the possible applications of sugarcane byproducts to mitigate climate change.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.2
• /
• pp.6-11
• /
• 2011

In this report, we provide experimental evidence that heavy metal ions could be removed using Pachymeniopsis sp., particularly soluble arsenic in leachate from soil contaminated by arsenic. We performed pilot scale of soil washing process based on our results. The adsorption of arsenic by Pachymeniopsis sp. indicated that it could be described with the Langmuir Model and the maximum adsorption capacity increased with decreasing pH (pH 3: 102.48 mg/g, pH 5: 98.32 mg/g, pH 7: 57.70 mg/g, pH 9: 43.34 mg/g) and increasing temperature (10$^{\circ}C$ : 60.38 mg/g, 20$^{\circ}C$ : 76.39 mg/g, 30$^{\circ}C$ : 112.12 mg/g). Our results revealed that soluble arsenic in leachate was removed from 24.03 mg/L to 0.6 ${\pm}$ 0.1 mg/L by Pachymeniopsis sp. for 48hours on pilot scale of soil washing process.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.373-378
• /
• 2007

A micro organism Agrobacterium tumifacient as an immobilized cell on a solid support was presented as a new biosorbent in a simple and sensitive spectrophotometry determination of Ni(II) in various samples using 4-hydroxy benzaldehyde-4-bromophenyl hydrazone as a color developing agent (λmax 497 nm) at pH 4.0 ± 0.2. Beer's law was obeyed over the range of 0.01-0.1 μg L-1. The molar absorptivity and Sandell's sensitivity were 1.285 × 105 L mol-1cm-1 and 0.007245 μg cm-2 respectively. Under these conditions, the preconcentration factor obtained was 82, and the detection limit achieved was 0.05 μg L-1. The detailed study of various interfering ions made the method more sensitive and selective. The recovery of Ni(II) from various samples range from 97.75 to 99.35%. The present method was successfully applied for the determination of Ni(II) in spiked, natural water and alloy samples. The proposed method was compared with reported methods in terms of Student's ‘t'-test and Variance ratio ‘f'-test which indicates that there is no significant difference between proposed and literature method at 95% confidence level.

• KSBB Journal
• /
• v.28 no.3
• /
• pp.185-190
• /
• 2013

For the selection of peptide specifically binding to $Pb^{2+}$, the biopanning with the commercially available Ph.D.-7 phage displayed heptapeptide library was carried out against $Pb^{2+}$ immobilized on a metal-chelating IDA (iminodiacetic acid) resin. After four rounds of screening against $Pb^{2+}$-IDA including negative selections against charged bead with metal ions other than $Pb^{2+}$ and uncharged bead, several candidate lead-binding phage peptides were initially determined based on the order of frequency from the screened phage clones. Of the selected phage peptide sequences, the peptide of the highest frequency, CysSerIleArgThrLeuHisGlnCys (CSIRTLHQC) also exhibited the strongest affinity for $Pb^{2+}$ in binding assays for individual phage clones. However, there was not a significant difference in $Pb^{2+}$ affinity between selected peptides when using synthetic heptapeptides corresponding to the displayed peptide sequences of phage clones.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.126-131
• /
• 1997

The biosorption and desorption of Cr, Cu and Al were carried out using brown marine algae Sargassum fluitans biomass, known as the good biosorbent of heavy metals. The content of alginate bound to light metals could be changed by physical and chemical pretreatment. The maximum uptake of Cr, Cu and Al was independent of the alginate content. The maximum uptaker of Al was two times(mole basis) than those of Cu and Cr. The aluminum-alginate complex was found in the sorption solution of raw and protonated biomass. Most of Cu, Al and light metals sorbed in the biomass were eluted at pH 1.1. However, only 5 to 10% of Cr sorbed was eluted at pH 1.1. The stoiceometric ion exchange between Cu and Ca ion was observed on Cu biosorption with Ca-loaded biomass. A part of Cr ion was bound to biomass as Cr(OH)2+ or Cr(OH)2+. Al was also bound to biomass as multi-valence ion and interfered with the desorbed Ca ion. The behavior of raw S. fluitans in ten consecutive sorption-desorption cycles has been investigated in a packed bed flow-through-column during a continuous removal of copper from a 35 mg/L aqueous solution at pH 5. The eluant used was a 1%(w/v) CaCl2/HC solution at pH 3.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.132-135
• /
• 1997

We prepared capsules containing Saccharomyces cerevisiae and Zoogloea ramigera cells for the removal of lead(II) and cadmium ions. Microbial cells were encapsulated and cultured in the growth medium. The S.cerevisiae cells grown in the capule did not leak through the capsule membrane. The dried cell density reached to 250 g/l on the basis of the inner volume of the 2.0 mm diameter capsule after 36 hour cultivation. The dry whole cell expolymer density of encapsulated Z.ramigera reached to 200 g/L. The capsule was crosslinked with triethylene tetramine and glutaric dialdehyde solutions. The cadmium uptake of encapsulated whole cell expolymer of Z.ramigera was 55mg Cd/g biosorbent. The adsorption line followed well Langmuir isotherm. The lead uptake of the encapsulated S. cerevisiae was about 30 mg Pb/g biomass. The optimum pH of the lead uptake using encapsulated S. cerevisiae was found to be 6. Freundlich model showed a little better fit to the adsorption data than Langmuir model 95 percent of the lead adsorbed on the encapsulated biosorbents was desorbed by the 1 M HCl solution. The capsule was reused 50 batches without loosing the metal uptake capacity. And the mechanical strength of the crosslinked capsule was retained after 50 trials.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.250-255
• /
• 2004

The aim of this work was to investigate the adsorption isotherm and kinetic model for the biosorption of lead $(Pb^{2+})$ by Rhodotorula aurantiaca and to examine the environmental factors for this metal removal. Within five minutes of contact, $Pb^{2+}$ sorption reached nearly 86% of the total $Pb^{2+}$ sorption. The optimum initial pH value for removal of $Pb^{2+}$ was 5.0. The percentage sorption increased steeply with the biomass concentration up to 2 g/l and thereafter remained more or less constant. The Langmuir sorption model provided a good fit throughout the concentration range. The conformity of these data to the Langmuir model indicated that biosorption of $Pb^{2+}$ by R. aurantiaca could be characterized as a monolayer, single-site type phenomenon with no interaction between ions adsorbed in neighboring sites. The maximum $Pb^{2+}$ sorption capacity $(q_{max})$ and Langmuir constant (b) were 46.08 mg/g of biomass and 0.04 l/mg, respectively. The pseudo second-order equation was well fitted to the experimental data. The correlation coefficients for the linear plots of t/q against t for the second-order equation were 0.999 for all the initial concentrations of biosorbent for contact times of 180 min. The theoretical $q_{eq}$ value was very close to the experimental $q_{eq}$ value.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.211-215
• /
• 2018

Chitosan was modified by gamma radiation-induced grafting with maleic acid and then used for the removal of cobalt ions from aqueous solutions. Chitosan-g-maleic acid was characterized by Fourier Transform infrared spectroscopy (FT-IR). The effect of the dose (1-5 kGy) and monomer concentration (0.3-1.3%, m/v) on the grafting ratio was examined. The adsorption kinetics and isotherms were also investigated. The results showed that the optimal dose for grafting was 2 kGy. When monomer concentration was within the range of 0.3-1.3% (m/v), the grafting ratio increased almost linearly. For the adsorption of cobalt ions by chitosan-g-maleic acid beads, the pseudo second-order kinetic model ($R^2=0.99$) and Temkin isotherm model ($R^2=0.96$) were able to fit the experimental data reasonably well. The equilibrium adsorption capacity of cobalt ions increased from 2.00 mg/g to 2.78 mg/g after chitosan modification.