• Journal of Periodontal and Implant Science
• /
• v.27 no.1
• /
• pp.61-78
• /
• 1997

PDGF-BB has been recognized as a highly potential growth factor for guided tissue regeneration in periodontal defect. This study carried out histologic and histometric evaluation of $200ng/cm^2$ PDGF-BB loaded bioresorbable membrane made from polyglycolic and polylactic acid. It was tested for its biocompatibility, ability to prevent epithelial downgrowth and amount of periodontal regeneration. Without membrane and PDGF-BB unloaded bioresorbable membrane were used as control. Healthy six beagle dogs were used. Each dog was anesthetized and buccal flaps were reflected in the mandibular and maxillary premolar areas. Buccal alveolar bone between the mesiobuccal and distobuccal line angles was surgically removed on the lower 2nd and 4th premolar in mandible, 2nd premolar in maxilla, to a level 4mm apical to the cementoenamel junction with creating a Class II buccal furcation defect for available space. Care was taken not to remove the root cementum layer and rubber impression materials were placed over each surgically created defect. Flaps were repositioned and sutured. Reconstructive surgery was performed 1 month after defect preparation. PDGF-BB loaded membranes and controls were randomly placed on maxillary 2nd premolars and mandibular 2nd and 4th premolars. Plaque control regimen was instituted with daily brushing with a 0.1% chlorhexidine digluconate during experimental periods. The animals were sacrificed 2 and 5 weeks after surgery and undecalcified specimens were prepared for histologic evaluation. The degree of coronal regrowth of new bone, new cementum and the amonut of new bone areas formed on the defected area of the PDGF-BB loaded membrnae turned superior to without membrane and drug unloaded membrane. Experimental membrane could prevent the epithelial downgrowth irrespective of drug loaded or not and showed good biocompatiblity, These results implicated that PDGF-BB loaded bioresorbable membrane could be highly useful tool for guided tissue regeneration of periodontal defects.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.179-185
• /
• 2000

The purpose of this study was to develop an osteogenic, biodegradable material using polymer and BMP. It was designed to have structural function and be moldable, for the reconstruction of load bearing areas and deformities of various configurations. Bone apatite was added to Poly(L-lactide)(PLLA) and made porous for osteoconductability and ease of BMP loading. The materials, with or without BMP purified from porcine bone matrix, were evaluated in cranial bone defect models in rats for biocompatibility and bone regeneration capability. The following results were obtained: The PLLA-BMP material with BMP added to the polymer showed 30% healing of cranial bone defects in rats during the 2 weeks to 3 months period of observation. The moldable PLLA agent without BMP also showed 25% bone healing capacity. Although new bone formation was incomplete in the critical size defect of rat cranium, it can be concluded that the unique moldability of those agents makes them useful for the reconstruction of various bone defects and maxillofacial deformities.

• Journal of Biosystems Engineering
• /
• v.29 no.4
• /
• pp.347-356
• /
• 2004

치아인회석, 키토산, 시아노아크릴레이트 등의 생분해성 생체재료를 이용해 새로운 생체흡수성 골시멘트를 개발하고자 하였다. 이들 골시멘트들에 대해서 중합온도, 응고시간 등의 조작특성과 압축강도, 전단강도 등의 물성을 분석하였다. 특히, 치아인회석과 키토산의 미립가루와 부틸 시아노아크릴레이트의 강력접착제를 이용한 시멘트(B)에 대해서는 직접 접촉방법과 XTT 방법을 통해 세포독성을 분석하였고, 또한 쥐를 이용한 동물실험에서 시멘트(B)의 처리그룹에 따라 생체적합성을 분석하였다. 시아노아크릴레이트를 이용한 골시멘트의 최대중합온도는 약 33$^{\circ}C$, 조작(응고)시간은 3-6분, 압축강도는 약 15-25㎫, 전단강도는 약 0.4-l.7 ㎫를 나타내었다. 첨가제로 사용된 Lipiodol은 골시멘트의 주사성과 강력접착제의 초기 중합지연도를 높였고, 특히 송진가루는 시아노아크릴레이트의 초기중합을 지연시켰다. 시아노아크릴레이트를 이용한 시멘트(B)의 세포독성을 분석한 결과, 대부분의 처리 그룹에서 낮게 나타났고, 특히 키토산과 치아인회석을 사용한 경우 각각 세포 독성이 더 낮게 나타났다. 그리고 골시멘트(B)의 동물 생체적합성 실험의 방사선상 및 조직학적 분석에서도 뼈 형성 및 결합이 우수하게 나타났다.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.287-305
• /
• 2000

The purpose of this study is to evaluate the effects of bioresorbable membranes in guided bone regeneration of streptozotocin induced diabetic rats. 50 Sprague-Dawley rats were randomly categorized into 4 groups: Group 1 & 2 had 10 normal rats each and group 3 & 4 included 15 streptozotocin induced diabetic rats each. Defect measuring 7mm in diameter was formed on every rat calvarium. No membrane was used in groups 1 & 3 and membranes were used in groups 2 & 4. The rates were sacrificed at 2 and 4 weeks after defect formation. Routine histological specimens were prepared. Masson-trichrome and HE stain were done before light microscopy. Guided regenerative potential was evaluated by measuring the amount of new bone formation in the calvarial defect by histomorphometry. Following results were obtained. 1. New bone formation in the diabetic groups was significantly less that than in the normal groups regardless of membrane use(p<0.05). 2. In the comparison of new bone formation in the normal groups, membrane group showed significantly more bone formation(p<0.1). 3. When the amount of new bone formation was compared in the diabetic groups, more bone was formed in the membrane groups but the difference was not statistically significant.4. In the normal groups the amount of new bone formation was significantly greater at 4 weeks compared to that at2 weeks(p<0.05) but amount of bone regeneration at 4 weeks was not significantly greater than that at 2 weeks in both diabetic groups.

• Journal of Periodontal and Implant Science
• /
• v.27 no.1
• /
• pp.117-128
• /
• 1997

Using barrier membrane, guided bone regeneration(GBR) and guided tissue regeneration(GTR) of periodontal tissue are now widely studied and good results were reported. In bone regeneration, not all cases gained good results and in some cases using GTR, bone were less regenerated than that of control. The purpose of this study is to search for the method to improve the success rate of GBR and GTR by examination of the cause of the failure. For these study, rats and beagle dogs were used. In rat study, 5mm diameter round hole was made on parietal bone of the rat and 10mm diameter of bioresorbable membrane was placed on the bone defects and sutured. In 1 ,2, 4 weeks later, the rats were sacrificed and Masson-Trichrome staining was done and inspected under light microscope for guided bone regeneration. In dog study, $3{\times}4mm^2$ Grade III furcation defect was made at the 3rd and 1th premolar on mandible of 6 beagle dogs. The defects were covered by bioresorbable membrane extending 2-3mm from the defect margin. The membrane was sutured and buccal flap was covered the defect perfectly. In 2, 4. 8 weeks later. the animals were sacrificed and undecalcified specimens were made and stained by multiple staining method. In rats. there was much amount of new bone formation at 2 weeks. and in 4 weeks specimen, bony defect was perfectly dosed and plenty amount of new bone marrow was developed. In some cases, there were failures of guided bone regeneration. In beagle dogs, guided tissue regeneration was incomplete when the defect was collapsed by the membrane itself and when the rate of resorption was so rapid than expected. The cause of the failure in GBR and GTR procedure is that 1) the membrane was not tightly seal the bony defects. If the sealing was not perfect, fibrous connective tissue infiltrate into the defect and inhibit the new bone formation and regeneration. 2) the membrane was too tightly attached to the tissue and then there was no space to be regenerated. In conclusion, the requirements of the membrane for periodontal tissue and bone regeneration are the biocompatibility, degree of sealingness, malleability. space making and manipulation. In this animal study. space making for new bone and periodontal ligament, and sealing the space might be the most important point for successful accomplishment of GBR and GTR.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.686-692
• /
• 2012

Solid free-form fabrication (SFF) technology was developed to fabricate three-dimensional (3D) scaffolds for tissue engineering (TE) applications. In this study, we developed a polymer deposition system (PDS) and created 3D microstructures using a bioresorbable polycaprolactone (PCL) polymer. Fabrication of 3D scaffolds by PDS requires a combination of several devices, including a heating system, dispenser, and motion controller. The system can process a polymer with extremely high precision by using a 200 ${\mu}m$ nozzle. Based on scanning electron microscope (SEM) images, both the line width and the piled line height were fine and uniform. Several 3D micro-structures, including the ANU pattern (a pattern named after Andong National University), $45^{\circ}$ pattern square, frame, cylindrical, triangular, cross-shaped, and hexagon, have been fabricated using the polymer deposition system.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.229.1-229.1
• /
• 2003

Recently, the barrier membranes have been applied for regenerating bone surrounding peri-implant defects in guided bone regeneration(GBR). GBR membrane should provide mechanical support sufficient to withstand in vivo forces and maintain wound space for bone regeneration. The ability to exclude unwanted tissues of cells(connective tissue and epithelium) is needed. In addition large surface area is conductive to tissue ingrowth. The search for ideal materials that biocompatible, bioresorbable and can support the growth and phenotypic expression of osteoblasts is a major challenge in the biomedical application for the repair of bone defects. (omitted)

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.603-613
• /
• 1995

The purpose of this investigation was to evaluate on the biodegradability, biocompatibility and tissue regenerative capacity of synthetic bioabsorbable membranes in beagle dogs. For animal study, 9 adult beagle dogs were used to examination, on the surgical implantation of membranes and histological analysis. In each animal, the 3rd and 4th premolars of the both sides of the mandible were selected as test teeth. Two types of bioresorbable membranes including "Guidor membrane", "S-membranes" were used to examining for biological activity, and also Gore-tex membranes was used for positive control. Surgically created defects were made in 2 premolars of both sides of the mandible at $3{\times}4mm^2$ in size and tested membranes were implanted in the defected area. A plaque control regimen was instituted with daily tooth brushing with a 0.1% chlorhexidine digluconate during experimental periods. All the experimental animals were sacrificed after 2, 4, and 8 weeks from surgery and undecalcified slides were prepared using the "sawing and grinding" technique described by Donath and Breuner". In biodegradability, all the membranes were started their biodegradation from two weeks after implantation and gradually demolished of their frame morphology from eight weeks. However, demolition of membranes in 8 weeks after implantation was highest in Guidor membranes and followed by S-membranes. Biocompatibilityof two kinds of biodegradable membranes including Guidor and S-mambrane were shown to be well tolerated to the surrounding tissue, and were minimal accumulation of inflammatory cell infiltration around the implanted membranes to compare with Gore-tex membrane. Regeneration of defected alveolar bone was initiated from two weeks of membrane implantation and new bone formation was gradually increased from that time. However, pattern of new bone formation on the defected areas of two kinds of biodegrable membranes was almost similar and quite competitive comparing with Gore-tex membrane. These results implicate that bioresorbable membranes should be highly useful tool for guided tissue regeneration of periodontal defects.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.3
• /
• pp.217-227
• /
• 1998

Calcium sulfate(plaster of Paris) has been used in dental and orthopedic surgery for about 100 years. It is well known that the plaster is bioresorbable, biocompatible, defect conformable and moldable. The purpose of this study is to evaluate two effects of calcium sulfate on bone regeneration, that is, the effects of graft materials and barrier for bone regeneration. Cortical bone defects were formed for recipient site on the femurs of 19 Sprague-Dawley rats. The autogenous particulated bone and calcium sulfate were grafted to the defects. Calcium sulfate paste, $Gore-Tex^R$ membrane(W.L. GORE & ASSOCIATES LTD., U.S.A.) and rubber sheet were used for the shielding materials. The results were as follows : 1. Calcium sulfate that had been grafted in the cortical bone defect was almost resorbed before bone remodeling, resultantly had little effect on bone regeneration. 2. Resoption process of calcium sulfate grafted on the bone grafting area tends to be accelerated, as being divided into numerous small particles progressively. Under the situation where the calcium sulfate was protected, with the coverage of fascia, $Gore-Tex^R$ membrane or rubber sheet, new bone formation was confirmed with presence of calcium sulfate particles over 6 weeks after grafting. 3. In the case of calcium sulfate covered with membrane, distinct bone formation was observed on the marrow space of femur adjacent to the plaster mass. 4. Rubber shielded plaster group revealed new bone trabeculae under the rubber sheet, but it showed ischemic degeneration of superficial cortical bone.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.42.2-42.2
• /
• 2009

인체의 치아 및 뼈는 무기질 성분과 단백질로 구성되어 있다. 생체세라믹스의 일종인 수산화아파타이트(Hydroxyapatite, HA; $Ca_{10}(PO_4)_6(OH)_2$)는 결정학적, 화학적으로뼈의 무기질 성분과 거의 유사하여 실제 체내에 들어가면 주위 뼈와 화학적 반응을 하여 단단한 결합을 이루는 생체활성(bioactive)을 가진 것으로 알려져 있다. 또한, 인산삼칼슘(Tri-Calcium Phosphate, TCP; $Ca_3(PO_4)_2$)은 체내에 이식 시 체액에 용해되어 신생골을 유도하는 생체흡수성(bioresorbable) 세라믹스로 알려져 있다. 상기 2종류를 포함한 인산칼슘계 화합물은 우수한 생체친화성에도 불구하고 역학 특성이 낮아, 하중을 거의 받지 않는 분야에만 사용되고 있는 실정이며, 하중을받는 분야(load-bearing part)에 적용하기 위해서는 고강도/고인성의 세라믹스와의 micro-composite이나 인산칼슘계화합물을 금속 표면에 코팅한 macro-composite의 형태로 사용되고 있다. 하중을 거의 받지 않는 분야, 예를 들어 치아 결손부를 보충할 dental shot과 같은 인산칼슘계 다공질 골충전재의 경우에도 취급 시 잘게 파손되는 문제점이 있어 치과의사들이 어려움을 호소하고 있는 실정이다. 본 연구에서는 HA, TCP의 역학특성을 증진시키고자 소결 공정 제어를 통하여 미세조직을 변화시켰으며, 미세조직 변화에 따른 세포반응성을 골포세포주를 이용하여 평가하였다.