• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.49-50
• /
• 2009

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.52-72
• /
• 2002

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.207-208
• /
• 2007

• 한국전문물리치료학회지
• /
• 제25권2호
• /
• pp.1-12
• /
• 2018

Background: It is very difficult for hemiplegic patients to effectively perform the sit-to-stand (STS) movements independently because of several factors. Moreover, the analysis of STS motion in hemiplegic patients has been thus far confined to only muscle strength evaluation with little information available on structural and environmental factors of varying chair height and foot conditions. Objects: This study aimed to analyze the change in biomechanical factors (ground reaction force, center of mass displacement, and the angle and moment of joints) of the joints in the lower extremities with varying chair height and foot conditions in hemiplegic patients while they performed the STS movements. Methods: Nine hemiplegic patients voluntarily participated in this study. Their STS movements was analyzed in a total of nine sessions (one set of three consecutive sessions) with varying chair height and foot conditions. The biomechanical factors of the joints in the lower extremities were measured during the movements. Ground reaction force was measured using a force plate; and the other abovementioned parameters were measured using an infra-red camera. Two-way repeated analysis of variance was performed to determine the changes in biomechanical factors in the lower extremities with varying chair height and foot conditions. Results: No interaction was found between chair height and foot conditions (p>.05). All measured variables with varying chair height showed a significant difference (p<.05). Maximum joint flexion angle, maximum joint moment, and the displacement of the center of mass in foot conditions showed a significant difference (p<.05); however the maximum ground reaction force did not show a significant difference (p>.05). Conclusion: The findings suggest that hemiplegic patients can more stably and efficiently perform the STS movement with increased chair height and while they are bare-foot.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1963-1966
• /
• 2005

Degenerative lumbar spinal stenosis(DLSS) is a disease inducing low back pain, leg pain, convulsion, numbness, and neurogenic claudication from compression of nerve root. Intervertebra fixation was reported to increase the degenerative of neighbor region after treatment. Recently, a new surgical technique of inserting a fixator between interspinous processes has been introduced. The purpose of this study is to design of the interspinous process fixator with flexibility to complement the trouble of using fixator in DLSS. This study evaluated the existing fixator through the mechanical test and modified fixators using the finite element analysis(FEA). Displacement, stiffness and Von-Mises stress were found to have similar values to those obtained from the mechanical test and the FEA in the biomechanical loading condition. Effects of variation in length and thickness were investigated to design an optimal fixator.

• 한국운동역학회지
• /
• 제22권2호
• /
• pp.253-259
• /
• 2012

The purpose of this study was to determine how smartphone use posture affects biomechanical variables and muscle activities. Eleven university students(age: $22.2{\pm}2.6$ yrs, height: $176.6{\pm}4.7$ cm, weight: $69.5{\pm}7.5$ kg) who have no musculoskeletal disorder were recruited as the subject according to having experience in using the smartphone for more than one year. Angular velocity, muscle activity, and thumb finger pressure were determined for each trial. For each dependent variable, a one-way analysis of variance (ANOVA) with repeated measures was performed to test if significant difference existed among different three conditions (p<.05). The result showed that rotational angular velocity of the first metacarpal were increased in DESK posture compared with STAND posture during SU phase. The average nEMG values of FDI(First dorsal interosseous) were less in SIT and DESK posture compared with STAND posture during SR phase. These indicated that smartphone postures may effect the thumb ROM(Range of motion) and muscle activity. This has led to suggestions of the need for further kinetic and EMG analyses to evaluate best assess and characterize with smartphone use.

• 한국운동역학회지
• /
• 제30권1호
• /
• pp.83-91
• /
• 2020

Objective: The study aimed to develop a functional performance index that evaluates the functional performance of Parkinson's patients, i.e., to integrate biomechanical measurements of walking, balance, muscle strength and tremor, and to use multiple linear regression with stepwise methods to identify the most suitable predictors for the progression of disease. Method: A total of 60 subjects were tested for sub-variables of four factors: walking, balance, isometric strength and hand tremors. Potential independet variables were extracted through correlation analysis of the sub-variables and dependent variables, Hoehn & Yahr scale. And then, a stepwise multiple regression analysis using the potential independent variables was performed to identify predictor of Hoehn & Yahr scale. Results: First, the results of the study showed that physical composition and gait had a relatively more correlated with the progression of the disease, compared to balance and hand tremor. Second, Parkinson's functional performance is characterized by dynamic pattern of walking, such as foot clearance and turning angle (TA) of walking, and a high-explained regression model is completed. Conclusion: The study emphasized the importance of walking variables and body composition in minor pathological features compared to Parkinson's patient's balancing ability and hand tremor. Specifically, it revealed that dynamic walking patterns functionally characterize patients. The results are worth considering when assessing functional performance related to the progression of the disease at the site.

• 한국CDE학회논문집
• /
• 제17권1호
• /
• pp.62-70
• /
• 2012

This paper proposes a novel discomfort assessment method for truck ingress and egress motions based on the maximum-voluntary-contraction (MVC) ratios of muscles obtained by biomechanical analysis of human musculoskeletal models. In this study, a human motion to enter and exit a truck cabin with different types and heights of footsteps is first measured using an optical motion capture system and load sensors. Next, in a biomechanical analysis system, a human musculoskeletal model with contacting conditions on footsteps and handles is modeled, and then joint torques and muscles forces are calculated by inverse dynamics of the musculoskeletal model with the motion data. Finally, the MVC ratios for the muscles are calculated and their statistical values are used as the measure of discomfort. To ensure the feasibility of our method, subjective discomfort levels have been investigated through the participants' experiments and questionnaires and compared to the results of our method. Comparing to the existing methods based on joint angles or torques, our approach provide a more essential criterion for discomfort because it is based on the muscle contraction by which an active human motion is basically generated.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.333-340
• /
• 2013

PURPOSE. This study was accomplished to assess the biomechanical state of different retaining methods of bar implant-overdenture. MATERIALS AND METHODS. Two 3D finite element models were designed. The first model included implant overdenture retained by Hader-clip attachment, while the second model included two extracoronal resilient attachment (ERA) studs added distally to Hader splint bar. A non-linear frictional contact type was assumed between overdentures and mucosa to represent sliding and rotational movements among different attachment components. A 200 N was applied at the molar region unilaterally and perpendicular to the occlusal plane. Additionally, the mandible was restrained at their ramus ends. The maximum equivalent stress and strain (von Mises) were recorded and analyzed at the bone-implant interface level. RESULTS. The values of von Mises stress and strain of the first model at bone-implant interface were higher than their counterparts of the second model. Stress concentration and high value of strain were recognized surrounding implant of the unloaded side in both models. CONCLUSION. There were different patterns of stress-strain distribution at bone-implant interface between the studied attachment designs. Hader bar-clip attachment showed better biomechanical behavior than adding ERA studs distal to hader bar.

• 대한인간공학회지
• /
• 제23권1호
• /
• pp.39-48
• /
• 2004

In terms of women engaged in clerical job. working time of the workers who mainly keep standing with their high-heeled shoes on has been increasing. According]y. they are exposed to many kinds of foot deformation caused by loads of lower back and lower extremities due to high-heeled shoes. The type of heels they usually wear are diverse though the hight is same. In this study. we investigated most women's favorite styles of shoes concerned with heights. types and contact areas of the heels. Hence. we designed three kinds of shoes for an experiment: their contact areas with ground are 1 cm2. 2-4 cm2 and over 9 cm2 according to the heel heights. respectively. To investigate the biomechanical effects. analysis of motion and EMG were applied to the experiments. In addition. foot pressure distribution was measured for more detailed analysis. Six healthy young women were participated in this experiments. The result showed the heel becoming higher and narrower increased not only fluctuation of CBM(Center of Body Mass). but also the load of low back muscle and lower extremities. Accordingly. there was significant difference among types of the heel in terms of the role supporting load of the body. though the height is same. Especially. the difference among the pressures on a foot was most significant. In conclusion. we verified biomechanical effects are related with the contact area of a heel with ground as well as the hight.