• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.129-132
• /
• 2013

The low rank coal combustion and biomass-coal co-firing characteristics were reviewed on this study for the power plant construction. The importance of using low rank coal(LRC) for power plant is increasing gradually due to power generation economy and biomass co-firing is also concentrated as power source because it has carbon neutral characteristics to reduce green-house effect. The combustion characteristics of low rank coal and biomass for a 310MW coal firing power plant and a 100MW biomass and coal co-firing power plant were studied to apply into actual power plant design and optimized the furnace and burner design.

• 한국연소학회지
• /
• 제19권3호
• /
• pp.8-17
• /
• 2014

The aims of this research were to evaluate effects of biomass co-firing to pulverized coal power plants and the variation of co-firing ratios on the plant efficiency related to power consumption of auxiliary system and flue gas characteristics such as production and component by process simulation based on the existing pulverized coal power plant. In this study, four kinds of biomass are selected as renewable fuel candidates for co-firing: wood pellet(WP), palm kernel shell(PKS), empty fruit bunch(EFB) and walnut shell(WS). Process simulation for various biomass fuels and co-firing ratios was performed using a commercial software. Gas side including combustion system and flue gas treatment system was considering with combination of water and steam side which contains turbines, condenser, feed water heaters and pumps. As a result, walnut shell might be the most suitable as co-firing fuel among four biomass since when 10% of walnut shell was co-fired with 90% of coal on thermal basis, flue gas production and power consumption of auxiliary systems were the smallest than those of other biomass co-firing while net plant efficiency was relatively higher than those of other biomass co-firing. However, with increasing walnut shell co-firing ratios, boiler efficiency and net plant efficiency were expected to decrease rather than coal combustion without biomass co-firing.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.818-826
• /
• 2017

신 재생에너지 보급통계에 의하면 바이오매스 발전실적은 2013년 부터 급증하고 있으며 그 중에서 가장 급격하게 증가한 연료는 Wood pellet으로 2013년 696Gwh, 2014년 2,764Gwh, 2015년에는 2,512Gwh를 발전 하였고 국내 Wood pellet 총 소비량은 2015년 기준 148만톤이며 그 중 발전용으로 소비된 Wood pellet은 108만톤으로 약 73%를 차지하고 있다. 본 연구에서 Wood pellet 소요량을 예측한 결과 국내 발전용으로 필요한 Wood pellet 소요량은 2020년 261만톤, 2025년 685만톤, 2030년 1,139만톤이 필요하며, 최적 바이오매스 발전량 산정을 위하여 바이오매스 발전소에서 국내 생산 Wood pellet 사용량을 50% 사용한다는 가정하에 기 허가 신청된 발전소를 가동하기 위해서는 2021년 226만톤의 Wood pellet이 국내에서 생산되어야 한다는 결론이 도출 되었다.

• 한국표면공학회지
• /
• 제49권1호
• /
• pp.14-19
• /
• 2016

Biomass is a renewable and sustainable source of energy used to create electricity or pressurized steam. In biomass-fueled power plants, wood waste or other waste is burned to produce steam that runs a turbine to make electricity, or that provides heat to industries and homes. Biomass power plants, apart from producing energy, help to reduce the $CO_2$ emission. However, the main problem is the high-temperature corrosion due to fuel corrosivity, especially of the straw. This limits both the temperature of the steam and also the effectiveness of the power plant. The corrosion in biomass-fueled plant was described.

• ALGAE
• /
• 제19권3호
• /
• pp.257-270
• /
• 2004

In order to clarify the structure and seasonal dynamics of warm tolerant benthic marine algal community in Korea, the species composition and biomass of marine algae at the discharge canal of Uljin nuclear power plant on the East Coast of Korea were investigated seasonally from February 1992 to October 2000. 107 species of marine algae were found at the discharge canal during the past nine years. In general, the number of species observed was abundant in spring or summer and less in autumn or winter. 27 species (4 blue-green, 5 green, 6 brown and 12 red algae) of marine algae occurred more than 1/ 6 frequency and thus can be categorized as warm tolerant species. Among these, one brown (Dictyota dichotoma) and four red algae (Gelidium amansii, Anphiroa ephedraea, Hydrolithon sargassi, Marginisporum crassissimum) are recorded as warm tolerant marine algae for the first time in Korea. Padina arborescens, Anphiroa zonata and Corallina pilulifera were common species found more than 75% frequency. Seasonal fluctuations of mean biomass were 0-1,330 g dry wt m^(-2) and dominant species in biomass were Corallina pilulifera (contribution to a total biomass proportion 34%), Anphiroa zonata (23%), Padina arborescens (18%) and Sargassum micracanthum (11%). The red algae appeared as predominant algal group at the discharge canal of Uljin nuclear power plant in the qualitative and quantitative aspects. The green algae such as Enterornorpha compressa appeared rather frequently at the discharge canal, but the biomass proportion was very low, in contrast to Kori nuclear power plant where there was definite green algal dominance. Differences in algal communities developed at the discharge canals of Uljin and Kori nuclear power plant on the East Coast of Korea, particularly biomass proportions of green algae, can probably be related to local environmental factors such as water velocity through the canal and natural seawater temperatures.

• 한국폐기물자원순환학회지
• /
• 제35권7호
• /
• pp.640-646
• /
• 2018

Biomass-fired power plants produce electricity and heat by burning biomass in a boiler. However, one of the most serious problems faced by these plants is severe corrosion. In biomass boilers, corrosion comes from burnt fuels containing alkali, chlorine, and other corrosive substances, causing boiler tube failures, leakages, and shorter lifetimes. To mitigate the problem, various approaches implying the use of additives have been proposed; for example, ammonium sulfate is added to convert the alkali chlorides (mainly KCl) into the less corrosive alkali sulfates. Among these approaches, the high temperature corrosion prevention technology based on ammonium sulfate has few power plants being applied to domestic power plants. This study presents the results obtained during the co-combustion of wood chips and waste in a circulating fluidized bed boiler. The aim was to investigate the characteristics of pollution load in domestic biomass power plants with ammonium sulfate injection. By injecting the ammonium sulfate, the KCl content decreased from 68.9 to 5 ppm and the NOx were reduced by 18.5 ppm, but $SO_2$ and HCl were increased by 93.3 and 68 ppm, respectively.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.525-529
• /
• 2016

바이오매스 혼소는 신재생 에너지의 비중을 늘리면서 석탄화력발전에서의 $CO_2$ 배출을 저감할 수 있는 단중기적으로 가장 효과적인 방법이다. 본 논문에서는 이 중 기존 화력발전소에 가장 적은 초기투자비로 적용할 수 있는 직접 혼소법에 대하여 주로 고찰을 수행하고, 국내외 현황 및 전망에 대해 기술하였다. 직접 혼소법은 바이오매스 전용 미분기를 사용하여 혼소율을 늘리는 방법과 저 혼소율에서 초기투자비를 최소화하는 기존 석탄 미분기 사용 바이오매스 혼소법으로 나눌 수 있다. 유럽 및 미국에서는 혼소율을 높이기 위해 많은 상용발전소에서 바이오매스 전용 미분기를 사용하여 10~20% 가량의 혼소율(열량 기준)로 운전을 수행하고 있으나, 국내의 경우에는 RPS 대응을 위해 3~5% 가량의 혼소율에서 기존 석탄 미분기를 그대로 사용하여 바이오매스 혼소를 수행하고 있다. 신기후체제가 시작되고 석탄화력발전에서의 $CO_2$ 저감 요구가 점점 더 증대될 것으로 예상되는 바, 향후 바이오매스 고혼소율이 수행될 수 있는 기술적/저책적 방안이 모색되어야 하며, 이 경우 발생할 수 있는 설비에의 악영향을 면밀히 고려한 연료 표준화 및 전처리 기술이 개발되어야 한다.

• 플랜트 저널
• /
• 제18권3호
• /
• pp.28-40
• /
• 2022

신재생에너지 발전 비중 확대가 예상됨에 따라 공공 발전사업자들은 바이오매스 혼소의 확대 시행을 적극적으로 검토해야 할 필요가 있다. 본 연구에서는 500MW 석탄화력에서 바이오매스 혼소율을 0wt.%에서 5.0wt.%까지 변화하며 미분기 주요 운전 특성을 측정하였다. 먼저, 목질계 바이오매스에 대한 구성성분 분석과 분쇄 특성을 알아보았고, 혼합연료의 부피 증가가 미분기 보울 압력 차이, 모터 전류, 이물질 처리횟수, 출구 온도, 내부 화재횟수에 미치는 영향을 분석하였다. 혼소율 증가에 따라 미분기 보울 압력 차이와 모터 전류, 이물질 처리횟수는 상승함을 확인하였고, 출구 온도는 상승 폭이 미미하였다. 내부 화재횟수는 명확한 상관관계를 찾기 힘드나, 다른 운전인자와 결합하여 발생할 가능성이 크다는 것을 확인하였다.

• ALGAE
• /
• 제22권4호
• /
• pp.297-304
• /
• 2007

This study is intended to clarify the effects of heated effluents on intertidal benthic marine algal community in Korea. The species composition and biomass of marine algae at the discharge canal of Gori nuclear power plant on the southeastern coast of Korea were investigated seasonally from February 2001 to October 2006. As a result, 54 species (7 blue-green, 12 green, 9 brown and 26 red algae) of marine algae were found at the discharge canal during the past six years. In general, the number of species observed was abundant during winter to spring and less in autumn. Enteromorpha compressa, E. intestinalis, E. prolifera and Caulacanthus ustulatus were common species found more than 80% frequency during the study period. Seasonal fluctuations of mean biomass were 1-440 g dry wt m–2 and dominant species in biomass were Enteromorpha spp. (contribution to a total biomass proportion 28%), Sargassum horneri (14%) and Amphiroa beauvoisii (14%). It is evident from the floristic composition and biomass data that unique micro-environment of the discharge canal support different communities from those on the intake or control area. Results from the large numbers of surveys before and during plant operation showed that, in the regions influenced by thermal effluents such as the discharge canal of power plants, the process of ecological succession has been proceeded. It is assumed that the uni-directional water flow and the time of overhaul largely affect the development and succession of benthic marine algal communities of the discharge canal.

• 한국연소학회지
• /
• 제23권1호
• /
• pp.44-54
• /
• 2018

Heat and mass balance process modeling has been conducted for a coal-firing power plant to be used as a testbed facility for development of various plant systems and equipment. As the material and design of the boiler tube bundle and fuel conversion to the biomass have become major concerns, the process modeling is required to incorporate those features in its calculation. The simulation cases for two different generation load show the satisfying results compared to the operational data from the actual system. Based on the established process conditions, the hypothetical case using wood pellet has also been simulated. Additional calculations for the tube bundle has been conducted regarding the changes in the tube material and design.