Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

High-temperature Corrosion by Chlorides in Biomass-fired Plants

바이오매스 발전시 염소가스에 의한 고온부식

  • Lee, Dong Bok (School of Advanced Materials Science & Engineering, Sungkyunkwan University)
  • 이동복 (성균관대학교 신소재공학부)
  • Received : 2016.02.01
  • Accepted : 2016.02.26
  • Published : 2016.02.29
Download PDF
⟨ Previous Next ⟩

Abstract

Biomass is a renewable and sustainable source of energy used to create electricity or pressurized steam. In biomass-fueled power plants, wood waste or other waste is burned to produce steam that runs a turbine to make electricity, or that provides heat to industries and homes. Biomass power plants, apart from producing energy, help to reduce the $CO_2$ emission. However, the main problem is the high-temperature corrosion due to fuel corrosivity, especially of the straw. This limits both the temperature of the steam and also the effectiveness of the power plant. The corrosion in biomass-fueled plant was described.

Keywords

References

  1. New-Renewable Energy Center, Korea Energy Agency, http://www.energy.or.kr.
  2. P. Viklund, Superheater Corrosion in Biomass and Waste-fuel Fired Boilers, Doctoral Thesis, KTH Royal Institute of Technology, Sweden (2013).
  3. H. P. Nielsen, F. J. Frandsen, K. Dam-Johansen, L. L. Baxter, The Implications of Chlorine-associated Corrosion on the Operation of Biomass-fired Boilers, Prog. Energ. Combust. Sci., 26 (2000) 283-298. https://doi.org/10.1016/S0360-1285(00)00003-4
  4. E. Reese, H. J. Grabke, Einflu$\ss$ von Chloriden auf die Oxidation des $2^{1}/4$ Cr-1 Mo-Stahls, Mater. Corros., 43 (1992) 547-557. https://doi.org/10.1002/maco.19920431202
  5. E. Reese, H. J. Grabke, Einflu$\ss$ von Natriumchlorid auf die Oxidation von hochlegierten Chrom- und Chrom-Nickel-Stahlen, Mater. Corros., 44 (1993) 41-47. https://doi.org/10.1002/maco.19930440204
  6. N. Folkesson, L. G. Johansson, J. E. Svensson, Initial Stages of the HCl-induced High-temperature Corrosion of Alloy 310, J. Electrochem. Soc., 154 (2007) C515-C521. https://doi.org/10.1149/1.2754174
  7. S. Prakash, Developments in High Temperature Corrosion and Protection of Materials, edited by W. Gao and Z. Li, Woodhead, England (2008) 164.
  8. A. S. Khanna, Introduction to High Temperature Oxidation and Corrosion, ASM Int. USA (2002) 172.
  9. D. Young, High Temperature Oxidation and Corrosion of Metals, Elsevier, UK (2008) 383.

Cited by

  1. A Study on the Characteristics of Pollution Load in Biomass Power Plant with Ammonium Sulfate Injection vol.35, pp.7, 2018, https://doi.org/10.9786/kswm.2018.35.7.640