• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.127-137
• /
• 2021

Air emission charge for nitrogen oxide as a precursor of fine dust has been introduced and implemented within the country from 2020. Therefore, the development of economical combustion technology for NOx reduction has got more needed urgently. This study investigated the air-staging effect as a way to reduce the NOx during combustion of domestic unused forest biomass, recently possible to secure REC (Renewable Energy Certification) as a substitute for overseas wood pellets in a 0.1 MWth circulating fluidized bed combustion test-rig. Operating conditions were comparison with and without air-staging, the supply position of tertiary air (6.4 m, 8.1 m, 9.4 m in the combustor) and variation of air-staging ratio (Primary air:Secondary air:Tertiary air=91%:9%:0%, 82%:9%:9%, 73%:9%:18%). NO and CO concentrations in flue gas, profiles of temperature and pressure at the height of the combustion, unburned carbon in sampled fly ash and combustion efficiency on operating conditions were evaluated. As notable results, NO concentration with air-staging application under tertiary air supply at 9.4 m in the combustor reduced 100.7 ppm compared to 148.8 ppm without air-staging while, CO concentration increased from 52.2 ppm without air-staging to 99.8 ppm with air-staging. However, among air-staging runs, when tertiary air supply amount at 6.4 m in the combustor increased by air-staging ratio (Primary air:Secondary air:Tertiary air=73%:9%:18%), NO and CO concentrations decreased the lowest 90.8 ppm and 66.1 ppm, respectively. Furthermore, combustion efficiency at this condition was improved to 99.3%, higher than that (98.3%) of run without air-staging.

• Korean Journal of Organic Agriculture
• /
• v.25 no.2
• /
• pp.357-371
• /
• 2017

In this study we evaluated the availability of hairy vetch in citrus (Citrus unshiu Marc.) orchards of volcanic ash soils. The responses to increasing seeding rates and various growing conditions such as altitude, accumulated temperature, and soil chemical properties etc, were analyzed by means of the seedling establishment rate, weed occurrence ratio, and shoot biomass yield of hairy vetch. Field experiments were conducted at five citrus orchards by altitude from Sep. 2015 to Apr. 2016 in Jeju Island, Republic of Korea. Hairy vetch used in the study was 'Cheongpyungbora', developed by National Institute of Crop Science. Seeding rates of hairy vetch consisted of 30, 60 and $90kg{\cdot}ha^{-1}$. Results showed that the seedling establishment rates of hairy vetch were quite similar regardless of seeding rates in all fields and weed occurrence ratio at 30, 60 and $90kg{\cdot}ha^{-1}$ of seeding rates were 11.8, 3.8, and 5.1% (dry wt.), respectively. Both 60 and $90kg{\cdot}ha^{-1}$ of seeding rates, the weed occurrences were decreased by 96.2% and 94.9%. The nitrogen production of hairy vetch at 30, 60 and $90kg{\cdot}ha^{-1}$ of seeding rates were 254, 316, and $315kg{\cdot}ha^{-1}$, respectively. Both 60 and $90kg{\cdot}ha^{-1}$ of seeding rates, The nitrogen production were increased by 24%, compared to $30kg{\cdot}ha^{-1}$ of seeding rate. In these results we were considered that the cost-efficient seeding rate of vetch was $60kg{\cdot}ha^{-1}$ in citrus orchards. Also, this study showed that the shoot biomass of hairy vetch and various cultivative factors were related and The nitrogen production of hairy vetch had a little bit of positive correlation (R=0.2714) with accumulated temperature and considerable correlations with some items (EC ($R=0.4520^{**}$) and exchangeable K ($R=0.4078^{**}$)) of soil chemical properties. Therefore, we were considered that hairy vetch can be used as a leguminous cover crop in citrus orchards, the calculation formula (Y=4.4097X + 33.594 (R=0.9547)) can be suggested for nitrogen yield of hairy vetch by using the shoot fresh weight (X).

• Korean Journal of Ecology and Environment
• /
• v.38 no.1 s.110
• /
• pp.1-10
• /
• 2005

Macroinvertebrates from a first order stream at Mt Jumbong, Kangwon-do, was examined for their abundance and biomass. Sampling was done by using a pipe sampler (${\phi}$ 20 cm) for 11occasions (n = 5) at 4${\sim}$6 weeks intervals during November 1997 through October 1998. Water temperature and electronic conductivity of the study stream ranged $0\;{\sim}\;14^{\circ}C$ and 15${\sim}$25 ${\mu}s$/cm, respectively. During the study, 53 insect taxa and 3 non-insect taxa were collected. Annual mean number of individuals (${\pm}$1 SD) was 77741${\pm}$69232${\cdot}$m$^{-2}$ ${\cdot}$yr$^{-1}$, being high in winter (${\pm}$1 SD) (December: 171178${\pm}$130468 $m^{-2}$) and low in summer (${\pm}$ 1 SD) (June: 29872${\pm}$13078 $m^{-2}$). Non-predatory subfamilies of Chironomidae and Nemoura sp. occupied 53.3% and 21.8% of annual abundance. Annual mean biomass was 10g${\cdot}$m$^{-2}$${\cdot}$yr$^{-1}$ in ash free dry weight (AFDW), being high in late winter (February: 16 gAFDW $m^{-2}$.) and low in summer (June: 3 gAFDW $m^{-2}$). Gammarus sp. represented 39.8% of the total biomass and was followed by non-predatory subfamilies of Chironomidae (15.2%) and Hydatohylax sp. (8.5%, Limnephilidae: Trichoptera). Since the non-predatory subfamilies of chironomidae were composed of many species, Nemoura sp. was the most abundant taxon. However, Cammarus sp. was surely the most important taxon to the functional aspects of this first order stream ecosystems.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.358-373
• /
• 2013

In this study, both mild acid and alkali treatments with 1.0 wt% and 2.0 wt% of $H_2SO_4$ and NaOH solution were applied to evaluate the effects on chemical compositions of wood biomass. Yellow poplar (Liriodendron tulipifera L.) and larch (Larix kaempferi C.) were chosen due to major species planted in Korea. Chemical treatments of biomass were carried out by being soaked in either acid or alkali solution with 1:20 ratio for 72 hours at ambient temperature. Afterward, lignin, 5 major reduced sugars, ash contents and elemental composition were determined. To statistically understand the relationship between samples and chemical treatments, the Tukey test, simple linear regression model and ANOVA analysis were introduced using a statistical software R. As results from both wet chemistry and statistical analysis, yellow poplar was more affected on the lignin and xylose contents by acid treatments under these experimental conditions. Meanwhile, larch was more affected on the composition of galactose and lignin by alkali treatments. A series of results in this study would show that equivalent chemical treatment makes a change the chemical composition of each species.

• Korean Journal of Environmental Agriculture
• /
• v.2 no.2
• /
• pp.108-113
• /
• 1983

There has been two kind of research fields in evaluating the ecotoxicity of chemicals The one is a bioassay and the other is an ecosystem analysis. The toxicants are transported into different biota, which have quite different environmental behaviour patterns and toxic properties. The effects of pesticides (butachlor, carbofuran, and tricyclazole) on periphyton community was studied by analyzing content of chlorophyll-a and autotrophic index (AI) that is a means of determining the trophic nature of the periphyton community. Results indicated that the content of chlorophyll-a was not influenced by the pesticides. The growth of algae was inhibited by sunshine period. And AI value is 43-2027: the large value indicates heterotrophic periphyton community, and was not affected by pesticides.

• Clean Technology
• /
• v.16 no.2
• /
• pp.117-123
• /
• 2010

In this study, we propose two methods able to recover different type of gold from gold-cyanide solutions: biosorption and desorption process for mono-valent gold recovery and biosorption and incineration process for zero-valent gold recovery. The waste bacterial biomass of Corynebacterium glutamicum generated from amino acid fermentation industry was used as a biosorbent. The pH edge experiments indicated that the optimal pH range was pH 2 - 3. From isothermal experiment and its fitting with Langmuir equation, the maximum uptake capacity of Au(I) at pH 2.5 were determined to be 35.15 mg/g. Kinetic tests evidenced that the process is very fast so that biosorption equilibrium was completed within the 60 min. To recover Au(I), the gold ions were able to be successfully eluted from the Au-loaded biosorbent by changing the pH to pH 7 and the desorption efficiency was 91%. This indicates that the combined process of biosorption and desorption would be effective for the recovery of Au(I). In order to recover zero-valent gold, the Au-loaded biosorbents were incinerated. The content of zero-valent gold in the incineration ash was as high as 85%. Therefore, we claim on the basis of the results that two suggested combined processes could be useful to recover gold from cyanide solutions and chosen according to the type of gold to be recovered.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.395-400
• /
• 2017

Coke strength was increased by adding ash-free coal (AFC) binder. In this study, the effect of the AFC binder on the physical and chemical properties of coke was experimentally investigated to understand the molecular mechanism for the improved coke strength. For reduced $CO_2$ emission in steelmaking industry, torrefied biomass fuel mixed with coal binder is also considered. The interface between the base coal and AFC was thus examined using Scanning Electron Microscope (SEM). The coke strength was commonly measured by performing the indirect tensile test and Nuclear Magnetic Resonance (NMR) spectroscopy in $^1H$ and $^{13}C$ modes. For comprehensive mechanism study of the enhanced coke strength thus obtained, ordinary coal for thermal power plant use was carbonized with AFC for subsequent SEM examination. The NMR spectroscopy results of coke samples positively revealed that the tensile strength was proportional to the average number of aromatic rings.

• Journal of Environmental Science International
• /
• v.24 no.2
• /
• pp.253-260
• /
• 2015

Enlargement of street tree planting area is the proper and effective solution to reduce carbon dioxide. This solution bases on the ability of carbon storage and uptake by tree metabolism. However, the circumstance of road side has fatal disadvantages in tree metabolism such as growth and maturity because cutting and filling of roadsides cause unnatural soil composition. In this point, early rootage of street tree is the main factor of reducing carbon dioxide. This study aimed to find a appropriate transplantation planting method for sound and rapid rootage of street tree. For the study, Korean Mountain Ash(Sorbus alnifolia) were used for experimental groups. The groups were categorized by three groups such as trees produced on container with mulching treatment, trees produced in outdoor with mulching treatment, trees produced on container with weeding treatment. Each group consisted 10 trees with same size and transplanted in experimental site. Five months after transplanting, each group was estimated the biomass and carbon storage through a direct harvesting method. According to results of the study, the carbon storage of trees produced on container with mulching treatment is 42% more than trees produced in outdoor with mulching treatment. And the carbon storage of trees produced on container with mulching treatment is 19.5% more than trees produced on container with weeding treatment. These results may imply that transplantation of container produced tree with mulching treatment is the most rapid rootage among other groups. The weeding treatment is more effective than mulching treatment for rapid rootage of street trees.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.66-73
• /
• 2006

The effects of operation conditions, such as bed temperature, temperature rising rate, particle size, moisture content and so on, on thermo-chemical conversion of waste wood have been determined in a micro fixed bed gasifier. The samples were waste wood-chips such as pine, oak, acacia and ginkgo. The thinning timbers used as reactants in the experiments had $35wt\%$ moisture content, $0.5wt\%$ ash content and 4,550 kcal/kg heating value on a dry basis. A typical product distribution was a $40wt\%$ liquid, $20wt\%$ solid, and $40wt\%$ dry syngas. The syngas concentration was affected by operation conditions and average syngas concentration was $H_2:40vol\%,\;CO:30vol\%,\;CH_4:10vol\%$.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.58-66
• /
• 2012

Brewers grain is a byproduct of beer brewing and consists primarily of grain husks, pericarp, and fragments of endosperm. Although this material is consumed by animals and used as fertilizer, a large amount of brewers grain is simply discarded. Therefore, new methods for utilizing this fibrous resource should be pursued. In this study, we examined the potential utilization of brewers grain as an additive in the paperboard industry by determining the chemical composition of brewers grain and the physical properties of brewers grain powders after grinding with two types of grinders. We found that brewers grain had a lower holocellulose content and higher lignin content and intermediate ash content when compared to other biomass materials, and did not contain any contaminants that would interfere with the papermaking process. Particles had a higher fiber length, less fiber width, and narrower shape factor distribution when ground by a blender type grinder than by a pin crusher type grinder. The blender type grinder was concluded to make regular brewers grain particles appropriate for papermaking.