• Microbiology and Biotechnology Letters
• /
• v.46 no.4
• /
• pp.377-389
• /
• 2018

In this study, a novel microalgal strain, Desmodesmus sp. KAERI-NJ5, was isolated, identified, and evaluated as a candidate for biodiesel feedstock. In a preliminary study, the effects of four general microalgal growth factors, including temperature, pH, light intensity, and concentration of nitrogen source ($KNO_3$), on the microalgal photoautotrophic growth were evaluated. With the exception of light intensity, the growth factors needed to be optimized for the microalgal biomass production. Optimization was done using response surface methodology. The optimal conditions for biomass production were pH 6.54, $27.66^{\circ}C$, and 0.52 g/l $KNO_3$. The biomass production at the optimal conditions was 1.55 g/l, which correlated well with the predicted value of 1.5 g/l. The total lipid and fatty acid methyl ester contents of the cells grown at the optimal conditions were 49% and 21.2% of cell dry weight, respectively. To increase the lipid content of the biomass, microalgae were challenged by nitrogen starvation. Enhancement of total lipid and fatty acid content up to 52.02% and 49%, respectively, were observed. Lipid analysis of the nitrogen-starved cells revealed that C16 and C18 species accounted for 95.9% of the total fatty acids. Among them, palmitic acid (46.17%) and oleic acid (39.43%) dominantly constituted the algal fatty acids. These results suggest Desmodesmus sp. KAERI-NJ5 as a promising feedstock for biodiesel production.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.515-519
• /
• 2014

The fuel properties of biodiesel produced by changing the mixing ratio of methanol and ethanol in trans-esterification of soybean oil and lard were evaluated in this paper. The solubility of oil and fat in ethanol was higher than that in methanol. Also the more homogeneous biodiesel was produced as increasing the mole ratio of ethanol. The conversion characteristics of lard was the best at the mixing mole ratio of methanol and ethanol was 6 : 6 at the reaction temperature of $60^{\circ}C$. On the other hands, the best biodiesel conversion characteristics for soybean oil was obtained at the mixing mole ratio of 3 : 3. The kinematic viscosities of soybean oil and lard based biodiesel were 4.17~4.35 cSt and 4.69~4.93 cSt, respectively. The oxidation stability and higher heating value increased with increasing the mole ratio of ethanol. The oxidation stability satisfied the criteria of biodiesel quality of 6 hours. And finally, the higher heating value was approximately 40 MJ/kg.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.162-178
• /
• 2015

Petroleum based fossil fuels used to power most processes today are non-renewable fuels. This means that once used, they cannot be reproduced for a very long time. The maximum combustion of fossil fuels occurs in automobiles i.e. the vehicles we drive every day. Thus, there is a requirement to shift from these non-renenewable sources of energy to sources that are renewable and environment friendly. This is causing the need to shift towards more environmentally-sustainable transport fuels, preferably derived from biomass, such as biodiesel blends. These blends can be made from oils that are available in abundance or as waste e.g. waste cooking oil, animal fat, oil from seeds, oil from algae etc. Waste Cooking Oil(WCO) is a waste product and so, converting it into a transportation fuel is considered highly environmentally sustainable. Keeping this in mind, a life cycle assessment (LCA) was performed to evaluate the environmental implications of replacing diesel fuel with WCO biodiesel blends in a regular Diesel engine. This study uses Life Cycle Assessment (LCA) to determine the environmental outcomes of biodiesel from WCO in terms of global warming potential, life cycle energy efficiency (LCEE) and fossil energy ratio (FER) using the life cycle inventory and the openLCA software, version 1.3.4: 2007 - 2013 GreenDelta. This study resulted in the conclusion that the biodiesel production process from WCO in particular is more environmentally sustainable as compared to the preparation of diesel from raw oil, also taking into account the combustion products that are released into the atmosphere as exhaust emissions.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.1
• /
• pp.1-9
• /
• 2009

Nowadays, Tra catfish fat is given attention as an appropriate material for biodiesel production in Vietnam. The aim of this work is to investigate the optimal conditions of refining biodiesel and recovering glycerin by the transesterification from Tra catfish fat using KOH catalyst. As our results, the yield of transesterification was achieved to 94.17% at $50^{\circ}C$ for 45 min with 6:1 molar ratio of methanol to fat in the presence of 0.8% KOH catalyst, and wherein the biodiesel was refined by washing with distilled water at $70^{\circ}C$ and dried in a microwave oven. The yield of raw glycerin recoveries from the transesterification process was 78.58%. The purity of raw glycerin was 84.14% by the conditions of neutralization state with $H_{3}PO_{4}$ solution (pH = 5), $70^{\circ}C$, and 60 min. Activated carbon (3.0 wt.%) was used for the bleaching process at $80^{\circ}C$ for 20 min. The biodiesel was obtained in accordance with for ASTM D 6751 (biodiesel standard). The ash and water of raw glycerins were 7.32 and 8.01%, respectively, and implied that the raw glycerin is very promising candidate to be used as a raw material for textile and cosmetic industries.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.92-97
• /
• 2010

A study is conducted on thermal characteristics of biodiesel which is already being produced in many countries because of its stable supply of energy in non oil-producing countries and economical benefits against increasing oil price, and environment conservation. So biodiesel has been used as important energy source in the fuel fields and a mount of production has increased year by year. Therefore, it is very important to find out the thermal characteristics of biodiesel for ignition temperature, maximum pressure and thermal behavior. The purpose of this study is to compare on thermal characteristics of biodiesel, petroleum diesel and those mixtures. Also, the main study was performed by flash point testers and modified closed type of pressure vessel test (MCPVT). Based on the data of flash point and MCPVT, the ignition temperature and the maximum pressure of biodiesel was $182^{\circ}C$ and 40.1bar, and petroleum diesel was $54^{\circ}C$ and 29.8bar.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.72-76
• /
• 2011

In this study, we investigated the characteristics of biodiesel using the waste coffee oil which was extracted by waste coffee grounds. We tried to deduce the optimum conditions by defining the operating variables, such as mole ratio between methanol and coffee oil (6~18) and the reaction temperature ($45{\sim}60^{\circ}C$) in the biodiesel production processes. The performance was evaluated in terms of yields, contents of fatty acid methyl ester (FAME), viscosities, and heating values. The optimum reaction temperature was $55^{\circ}C$. Also, the best biodiesel was produced at the mole ratio between methanol and coffee oil of 12. The highest heating value of the produced biodiesel made from coffee oil was 39.0~39.4 MJ/kg, which satisfies the general standard for the biodiesel energy density, 39.3~39.8 MJ/kg.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.4
• /
• pp.386-403
• /
• 2016

Biofuels produced from biomass can be substituted for petroleum fuels due to GHG reduction, sustainability and environmental friendly. The process technologies that convert biomass into biofuels are varied and depend on the feedstocks. Microalgae are considered to be one of the most promising alternative source to the conventional feedstocks for biofuel. Microalgae can be converted to biodiesel, bioethanol, biogas and biojet fuel via thermolchemical and biochemical production technologies. This reviews discusses recent advance in understanding the effects of the characteristics of various processes on the production of biofuels using microalgae. The performances of microalgae based biofuel are compared.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.96-96
• /
• 2005

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.121-127
• /
• 2010

This study is to optimize the enzyme(lipase) activity for biodiesel production. The ion-exchanged non-woven fabrics(EtA, DEA-EtA non-woven fabric) containing ethanolamine, diethylamine groups are used by radiation induced grafted polymerization onto a non-woven fabric for more effective immobilization of lipase. Since the porous hollow fiber membranes are showed the low throughputibehe non-woven fabric membranes are used for biodiesel production. The physical charateristics of enzyme immobilized and the enzyme activity to EtA and DEA-EtA non-woven fabrics are studied. The EtA non-woven fabrics are quite similar to DEA-EtA non-woven fabric for the amount of enzyme immobilized(EtA non-woven fabric:15.69 mg/g, DEA-EtA non-woven fabric:14.45 mg/g) but DEA-EtA non-woven fabrics have shown the lower permeabiliquite the organic solvent than the EtA non-woven fabrics(EtA non-woven fabric:$3.50mol/h{\cdot}kg$, DEA-EtA non-woven fabric:$0.38mol/h{\cdot}kg$). Optimum characteristics of ehe non-woven fabric membranes and the limilaractivity are also investigated for the effective biodiesel production.

• Korean Journal of Microbiology
• /
• v.50 no.4
• /
• pp.313-318
• /
• 2014

The world is in need of sustainable and eco-friendly energy sources such as microalgal biodiesel due to global warming and fossil fuel shortages. In this study, we compared the effectiveness of liquid fertilizer produced from swine manure and agriculture grade solid fertilizers as nutrient sources for microalgal biomass production. Mixed culture (Chlorella spp., Scenedesmus spp., Stigeoclonium spp.; CSS) was cultivated for 28 days in Small Scale Raceway Pond (SSRP) using various nutrient sources (swine manure liquid fertilizer, agricultural solid fertilizer, and mixture of these two fertilizers). Biomass and lipid productivity of fertilizer mixture were the highest at 0.8 g/L and 5.8 mg/L/day, respectively. These results indicate that the fertilizer mixture can provide microalgae necessary nutrient sources for stable biodiesel production and biomass growth. In addition, overall cost of microalgal cultivation and subsequently biodiesel production would be significantly reduced.