• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.3
• /
• pp.249-254
• /
• 2013

The integrated gasification combined cycle (IGCC) system is well known for its high efficiency compared with other coal fueled power generation system. The aim of this study is to confirm the feasibility of using bio gas in coal feeding system and syngas recirculation system. The effects of using bio gas in the gasifier on the syngas composition were investigated through simulations using the Aspen Plus process simulator. It was found that these changes had an influence on the syngas composition of the final stream and bio gas can be used in a gasifier system.

• Journal of Applied Biological Chemistry
• /
• v.60 no.4
• /
• pp.333-338
• /
• 2017

Cellulosic alcohol fermentation has recently gained more attention in the production of ethanol, butanol, and 2,3-butanediol. However, it was revealed that the process had several hurdles, such as, an expensive cost for biomass decomposition to yield fermentable sugars and a production of byproduct lignin. As an alternative for the process through biomass saccharification, the alcohol production through syngas from biomass has been studied. In this study, we reviewed acetogen and its central metabolic pathway, Wood-Ljungdahl route, capable of utilizing syngas. Furthermore, the metabolic engineering strategies of acetogen for bio-alcohol production from syngas was also reviewed with a brief perspective.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.6
• /
• pp.143-150
• /
• 2012

바이오에탄올 생산공정은 당 (Sugar)을 기반으로 하는 공정과 합성가스를 이용하는 공정으로 분류할 수 있다. 이 가운데 합성가스를 이용하는 공정은 촉매를 이용한 화학적 공정과 혐기성 발효에 의한 생물학적 공정의 두 가지로 나뉜다. Clostridium ljungdahlii는 일산화탄소와 수소가 주요 성분으로 구성되는 합성가스를 이용하여 에탄올과 아세트산을 생산할 수 있는 균주 중의 하나로 알려져 있다. 합성가스 발효공정에서 pH는 미생물의 증식과 에탄올 등의 생산에 아주 중요한 요인 중의 하나이다. 본 연구에서는 pH 조건이 미생물의 생장과 에탄올 생산성에 미치는 영향을 조사하였다. C. ljungdahlii 배양은 엄격한 혐기성 조건에서 100 ml의 serum bottle과 pH 제어가 가능한 반응기를 이용한 실험결과, 회분식 배양 조건에서는 미생물의 생장과 에탄올 생산을 위한 최적 초기 pH는 7.0로 나타났다. 미생물 농도는 0.57 g/L, 에탄올 농도 0.91 g/L로 나타났다. pH 4.5 이하에서는 미생물의 생장이 멈추는 것으로 나타났다. pH 제어가 가능한 생물반응기에서는 pH 6.0 일때 에탄올 생산량이 pH 7.0 일때 보다 높게 나타났다. 일정 수준의 미생물 농도를 유지한 조건에서 합성가스를 기포식으로 주입하고 pH 5.9에서 5.4까지 제어하였을 때 미생물량과 에탄올 농도가 증가하였다. 60 시간이 지난 후에 미생물의 농도는 0.498 g/L, 에탄올은 1.056 g/L까지 이르렀다.

• Journal of Energy Engineering
• /
• v.16 no.2
• /
• pp.83-92
• /
• 2007

In view of stringent environment regulations to control the emission of green house gases and also depleting fossil fuel reserves, it is high quality desirable to develop alternative technologies to produce high quality fuels. To this end Biomass to Liquid (BTL) technology has received much attention in recent years. BTL process generally consists of gasification of biomass to produce bio-syngas, cleaning and control of $H_{2}/CO$ mole ratio of bio-syngas and Fischer-Tropsch synthesis & upgrading systems. Choren, Germany has first developed the commercial BTL process using unique gasification system i.e., Carbo-V. A new technology to remove tars and BTX has been developed by ECN in Netherlands employing a gasification system combined with OLGA technology. Several other countries including USA and Japan are showing great interest in BTL technology. Thus in view of our national energy security and also the environmental regulations, it is essential to develop alternative technologies like BTL in order to meet the increasing demand of energy though our insufficient biomass resources. In this paper we present an overview and development status of BTL-diesel technology.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.4
• /
• pp.107-119
• /
• 2013

바이오매스 가스화는 세계적인 증가 추세에 있는 에너지 수요를 충족할 수 있는 기술 중의 하나이다. 바이오매스 가스화를 통해서 농업 폐기물 등 다양한 바이오매스 자원을 에너지로 전환할 수 있고 $CO_2$ 배출량 또한 줄일 수 있다. 본 연구에서는 COMSOL$^{(R)}$ 3.4 소프트웨어를 이용하여 바이오매스 원료와 운전 조건에 따른 가스화 효율 및 합성가스 조성의 변화를 분석하였다. 원료와 구동조건을 최적화하기 위해 가스화 모델을 세우고 원료와 구동조건을 달리하여 합성가스의 성분을 분석 및 예측하였다. 이 모델은 물리적인 실험을 통해 알고 있는 조건을 통해서 합성가스 성분을 시간에 따라 예측할 수 있다. 모델을 이용하여 함수비 5~30 %, 공기중 산소함량 5~50 %, 공기공급 유량 5~45 L/min, 온도 973~1273 K의 조건에서 합성가스의 성분을 예측한 결과 실제 실험 결과와 일치하는 것을 알 수 있다. 모델링 결과 양질의 합성가스를 생산하려면 원료의 회분함량이 적어야 하고 수소 함량이 높은 합성가스를 생산하려면 반응 온도가 높게 유지되고 원료의 함수비가 높아야 한다. 가스화장치의 온도를 높이면 합성가스의 성분 중 CO의 함량이 많아지고, CO의 함량이 많아지면 가스의 발열량이 높아지는 것을 알 수 있다. 또한 CO의 농도가 높고 발열량이 높은 합성가스를 생산하기 위해서는 ER값은 작아야 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.102.1-102.1
• /
• 2010

바이오매스(Biomass)는 지구상에서 에너지원으로 이용될 수 있는 모든 식물과 미생물을 총칭하는 의미로 사용된다. 최근 바이오매스를 에너지자원화 시키는 방법으로 주목받는 열화학적 전환(Thermo-chemical conversion) 반응은 산소가 없이 혹은 희박한 조건에서 바이오매스에 열과 압력을 가하거나 공기나 수증기 등의 가스화제와 반응하여 바이오오일(Bio-oil) 및 합성가스(Syngas)로 변화하는 프로세스를 의미한다. 바이오매스로부터 바이오 DME(Di-Methyl Ether) 생산을 위한 합성가스를 제조하기 위해서 국내 산림자원을 대상으로 열분해반응 특성연구를 수행하였다. 또한 이들 물질로부터 바이오 DME 합성을 위해 최적의 합성가스 제조를 위한 타당성 연구를 수행하였다. 반응온도 $800{\sim}900^{\circ}C$에서 가스화 수율은 78~80%, 촤 수율은 17~20%, 타르 수율은 4~10%였고, 합성가스($H_2$/CO)비는 0.9~1.6였다.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.354-361
• /
• 2019

Renewable energy from biomass and biodegradable wastes can significantly supplement the global energy demand if properly harnessed. Pyrolysis is the most profound modern technique that has proved effective and efficient in the energy conversion of biomass to yield various products like bio-oil, biochar, and syngas. This study focuses on optimization of slow pyrolysis of banana peels waste to yield banana peels vinegar, tar and biochar as bio-infrastructure products. Response surface methodology using central composite design was used to determine the optimum conditions for the banana wastes using a batch reactor pyrolysis system. Three factors namely heating temperature ($350-550^{\circ}C$), sample mass (200-800 g) and residence time (45-90 min) were varied with a total of 20 individual experiments. The optimal conditions for wood vinegar yield (48.01%) were $362.6^{\circ}C$, 989.9 g and 104.2 min for peels and biochar yield (30.10%) were $585.9^{\circ}C$, 989.9 g and 104.2 min. The slow pyrolysis showed significant energy conversion efficiencies of about 90% at p-value ${\leq}0.05$. These research findings are of primary importance to Uganda considering the abundant banana wastes amounting to 17.5 million tonnes generated annually, thus using them as pyrolysis feedstock can boost the country's energy status.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.6
• /
• pp.609-628
• /
• 2015

Thie study presents the biomass-derived jet (bio-jet) fuel production technologies for greenhouse gas (GHG) reduction in aviation sector. The aviation sector is responsible for the 2% of the world anthropogenic $CO_2$ emissions and the 10% of the fuel consumption: airlines' costs for fuel reach 30% of operating costs. In addition, the aviation traffic is expected to double within 15 years from 2012, while fuel consumption and $CO_2$ emissions should double in 25 years. Biojet fuels have been claimed to be one of the most promising and strategic solutions to mitigate aviation emissions. This jet fuel, additionally, must meet ASTM International specifications and potentially be a100% drop-in replacement for current petroleum jet fuel. In this study, the current technologies for producing renewable jet fuels, categorized by alcohols-to-jet, oil-to-jet, syngas-to-jet, and sugar-to-jet pathways are reviewed for process, economic analysis and life cycle assessment (LCA) on conversion pathways to bio-jet fuel.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.76-82
• /
• 2012

Biomass and coal are great potential energy sources for gasification process. These solids can be gasified to produce syngas and bio-oil which can be upgraded further to transportation fuel. Two biomass and three coals have been gasified with steam in a thermobalance reactor under atmospheric pressure in order to evaluate their kinetic rate information The effects of gasification temperature ($600{\sim}850^{\circ}C$) and partial pressure of steam (30~90 kPa) on the gasification rate have been investigated. The three different types of gas-solids reaction models have been applied to the experimental data to compare their predictions of reaction behavior. The modified volumetric reaction model predicts the conversion data well, thus that model was used to evaluate kinetic parameters in this study. The gasification reactivity of five solids has been compared. The obtained activation energy of coal and biomass gasification were well in the reasonable range. The expression of apparent reaction rates for steam gasification of five solids have been proposed as basic information for the design of coal gasification processes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.107-107
• /
• 2010

Hydrogen is an alternative fuel for the future energy which can reduce pollutants and greenhouse gases. Synthesis gas have played an important role of synthesizing the valuable chemical compound, for example methanol, DME and GTL chemicals. Renewable biomass feedstocks can be potentially used for fuels and chemical production. Current thermal processing techniques such as fast pyrolysis, slow pyrolysis, and gasification tend to generate products with a large slate of compounds. Lignocellulose feedstocks such as forest residues are promising for the production of bio-oil and synthesis gas. Pyrolysis and gasification was investigated using thermogravimetric analyzer (TGA) and bubbling fluidized bed gasification reactor to utilize forest woody biomass. Most of the materials decomposed between $320^{\circ}C$ and $380^{\circ}C$ at heating rates of $5{\sim}20^{\circ}C/min$ in thermogravimetric analysis. Bubbling fluidized bed reactor were use to study gasification characteristics, and the effects of reaction temperature, residence time and feedstocks on gas yields and selectivities were investigated. With increasing temperature from $750^{\circ}C$ to $850^{\circ}C$, the yield of char decreased, whereas the yield of gas increased. The gaseous products consisted of mostly CO, CO2, H2 and a small fraction of C1-C4 hydrocarbons.