• 정보처리학회논문지A
• /
• 제16A권4호
• /
• pp.255-262
• /
• 2009

유비쿼터스 센서 네트워크(USN)에 기반한 엔터테인먼트용 자율 돌고래 로봇의 구현에 관하여 소개한다. 일반적으로 수중에서 동작하는 생체모방 로봇에 유비쿼터스 센서 네트워크와 GPS를 적용하는 것은 불가능한 일이다. 본 논문에서 제안된 엔터테인먼트용 돌고래 로봇은 수중이 아닌 수면에서 동작하므로, 사용자와의 상호작용을 중요시하며 제안된 수중 로봇의 네비게이션은 GPS정보와 배치된 USN 모트로부터 얻어진 미세한 위치 정보로부터 수행된다. 본 논문에서는 제안된 돌고래 로봇의 기계적인 구조, 센서와 엑추에이터, 마이크로컨트롤러 보드와 수영 방법, 사용자와의 상호작용의 특징을 기술한다. 엔터테인먼트 돌고래 로봇은 유저에 의한 접촉 센서의 감지 신호를 입력받아 입을 움직이거나, 꼬리를 치고, 물을 뿜어내는 등의 전형적인 응답을 보인다. 로봇의 자율성을 위하여 경로 설정, 장애물 감지 및 회피 등과 같은 로봇의 움직임뿐 아니라 인간과 로봇의 상호작용에 관련된 기능들을 마이크로컨트롤러가 제어한다. 돌고래 로봇의 위치 정보는 배치된 USN 모트의 알려진 위치 정보로부터 주기적으로 교정된다.

• 센서학회지
• /
• 제27권4호
• /
• pp.242-248
• /
• 2018

Bicycle fittings have been used to ride bicycles comfortably while minimizing non-traumatic injuries. To analyze the cause of non-traumatic injuries, it is necessary to measure the body weight distribution in various biking positions. In this study, a weight distribution measurement system was implemented by installing five weighable devices on the saddle, both pedals, and both handle grips of a bicycle. To measure the body weight applied through the saddle, the structure of a commercial seat post was modified and a load cell was installed inside. Weighable pedals and handle grips were designed using a 3D modeling program and fabricated by employing a 3D printer. The body weight distribution for ten bicycle riders was measured when the two pedals were aligned horizontally and vertically. Experimental results showed that the body weight distribution varied significantly depending on human body shape, even after the bicycle fitting was completed. The difference between the body weight measured by the proposed system and a commercial scale was less than 3 %.

• 디지털융복합연구
• /
• 제12권4호
• /
• pp.335-342
• /
• 2014

최근 노인인구의 증가하는 추세에 따라 만성질환자의 수도 증가하고 있으며 이에 따라 만성질환자들에 대한 건강 관리문제가 중요하게 대두되고 있다. 본 논문에서는 스마트 모바일 기기를 이용한 만성질환 관리 시스템을 구현하고자 한다. 제안한 만성질환 관리 시스템은 생체정보를 검출하는 생체계측센서와 그 센서로부터 정보를 수신하고 환자관리 서버로 정보를 전송하는 스마트 모바일 기기, 그리고 무선 통신망을 통해 전달받은 데이터를 해석하고 처리하기 위한 환자관리 서버, 환자관리 DB, 그리고 환자 증상분석 전문가 에이전트로 구성된다. 생체 신호는 심전도, 혈압, 혈당 및 PPG 등의 모듈로 구성하였다. 만성질환자에 대한 건강관리 시스템을 구현함으로서 측정되어진 생체 데이터를 모니터링하여 현재의 건강상태를 확인할 수 있었으며, 모바일 환경에서 환자군에게 맞는 개별적인 서비스를 제공할 수 있다는 점에서 의의가 있다.

• 농촌계획
• /
• 제21권4호
• /
• pp.177-186
• /
• 2015

The main objective of this study was to assess the applicability of IoT (Internet of Things)-based flood management under climate change by developing intelligent water level monitoring platform based on IoT. In this study, Arduino Uno was selected as the development board, which is an open-source electronic platform. Arduino Uno was designed to connect the ultrasonic sensor, temperature sensor, and data logger shield for implementing IoT. Arduino IDE (Integrated Development Environment) was selected as the Arduino software and used to develop the intelligent algorithm to measure and calibrate the real-time water level automatically. The intelligent water level monitoring platform consists of water level measurement, temperature calibration, data calibration, stage-discharge relationship, and data logger algorithms. Water level measurement and temperature calibration algorithm corrected the bias inherent in the ultrasonic sensor. Data calibration algorithm analyzed and corrected the outliers during the measurement process. The verification of the intelligent water level measurement algorithm was performed by comparing water levels using the tape and ultrasonic sensor, which was generated by measuring water levels at regular intervals up to the maximum level. The statistics of the slope of the regression line and $R^2$ were 1.00 and 0.99, respectively which were considered acceptable. The error was 0.0575 cm. The verification of data calibration algorithm was performed by analyzing water levels containing all error codes in a time series graph. The intelligent platform developed in this study may contribute to the public IoT service, which is applicable to intelligent flood management under climate change.

• Current Research on Agriculture and Life Sciences
• /
• 제32권2호
• /
• pp.79-84
• /
• 2014

본 논문에서는 저가, 저전력 및 소형의 IMU를 구성하기 위한 MEMS 관성 센서를 이용하여 자세 정보를 제공받는 ARHES에 위의 센서를 사용하기 위해 자이로 센서 및 가속도센서의 데이터 출력 특성을 검증하여 오차 및 정확도를 분석하였다. 센서 실험을 위하여 진자 실험 장치를 제작하였고, 진자 운동에 대한 센서 데이터를 수집하였다. 이론적인 수식을 유추하여 센서 데이터의 정확성 분석을 위한 기준 값으로 설정하였다. 센서값과 이론값을 비교하면 각속도에서 4.32~5.72%, 가속도에서 x-, z-축 방향에 대하여 각각 3.53~6.74% 및 3.91~4.16%의 오차율을 나타냈다. 진자실험 장치를 이용한 센서 검증에서 무인헬리콥터에 사용될 센서로서 적합한 것으로 평가되었으며 이는 짐벌장치 등을 이용한 자세추정 알고리즘을 구성하는데 기초가 되었다. 또한, 더욱 정밀한 실험을 위해서는 온도 등 주변 환경 요인에 대한 보정이 요구된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1733-1734
• /
• 2008

We develope a riding robot system named as "RideBot" for health-care and entertainments. An algorithm for estimating riding position and volition is proposed by using bio-signals. We analyze the riding position and volition in real-horse riding environments and build up the database. With this database and sensor informations, standard positions are made. For the volition estimation, we use the acceleration and deceleration sensor information and bridle information for direction change. We propose a hybrid control algorithm in which discrete-state and continuous-state controls are combined. The efficiency of the proposed algorithm is evaluated thru various experiments.

• 한국연초학회지
• /
• 제17권1호
• /
• pp.5-14
• /
• 1995

Efficient algorithms for the automatic classification of flue-cured tovacco ripeness and grading have been developed The ripeness of the tobacco was classified into 4 levels vased on the color. The lab-built simple RGB color measuring system was utilized for detecting the light reflectance of the tobacco leaves. The measured data were used far training the artificial neural network The performance of the trained network was also tested far the untrained samples. The spectrophotometer was used to detect the light reflectance and absorption of the graded tobacco leaves in the frequency ranges of the visible light The measured data and the statistical analysis was performed to investigate the light characteristics of the graded samples. The measured data were obtained from samples of 5 different grades directly without considering the leaf positions. Those data were used far training the artificial neural network The performance of the trained network was also tested far the untrained samples. The neural network based sensor information processing showed successful results for grading of tobacco leaves.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.304-312
• /
• 2016

Purpose: Soil strength has been measured using a cone penetrometer, which is making it difficult to obtain the spatial data required for precision agriculture. Our objectives were to evaluate real-time horizontal soil strength (RHSS) to measure soil strength in real time while moving across the field. Using the RHSS data, the tillage depth was determined, and the power consumption of a tractor and rotavators were compared. Methods: The horizontal soil-strength index (HSSI) obtained by the RHSS was compared with the cone index (CI), which was measured using a cone penetrometer. Comparison analysis in accordance with the measurement depth that increased at 5-cm interval was conducted using kriged maps at six sensing depths. For tillage control and evaluation of the power consumption, the system was installed with a potentiometer for tillage depth, a torque sensor from the rear axle, and a power take-off (PTO) shaft. Results: The HSSI was lower than the CI, but they were the same at 54.81% of the total grids for the 5-cm depth and at 3.85% for the 10-cm depth. In accordance with the recommended tillage map, tillage operations between 0 and 15 cm left 2.3% and 7% residue cover on the soil, and that between 20 and 10 cm covered a wider utilization of 3% and 18.4%, respectively. When the tillage depth was 15 cm, the comparison result of the power requirements between the PTO and rear axle in terms of control performance revealed that the maximum power requirements of the axle and PTO were 44.63 and 23.24 kW, respectively. Conclusions: An HSSI measurement system was evaluated by comparison with the conventional soil strength measurement system (CI) and applied to a tractor to compare the tillage power consumption. Further study is needed on its application to various farm works using a tractor for precision agriculture.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.28-34
• /
• 2015

Purpose: This study aimed to install an RTK-GPS (Real Time Kinematic-Global Positioning System) and IMU (Inertial Measurement Unit) on a tractor used in a farm to measure positions, pasture topography, posture angles, and vibration accelerations, translate the information into maps using the GIS, analyze the characteristics of grass harvesting work, and establish new technologies and construction standards for pasture infrastructure improvement based on the analyzed data. Method: Tractor's roll, pitch, and yaw angles and vibration accelerations along the three axes during grass harvesting were measured and a GIS map prepared from the data. A VRS/RTK-GPS (MS750, Trimble, USA) tractor position measuring system and an IMU (JCS-7401A, JAE, JAPAN) tractor vibration acceleration measuring systems were mounted on top of a tractor and below the operator's seat to obtain acceleration in the direction of progression, transverse acceleration, and vertical acceleration at 10Hz. In addition, information on regions with bad workability was obtained from an operator performing grass harvesting and compared with information on changes in tractor posture angles and vibration acceleration. Results: Roll and pitch angles based on the y-axis, the direction of forward movements of tractor coordinate systems, changed by at least $9-13^{\circ}$ and $8-11^{\circ}$ respectively, leading to changes in working postures in the central and northern parts of the pasture that were designated as regions with bad workability during grass harvesting. These changes were larger than those in other regions. The synthesized vectors of the vibration accelerations along the y-axis, the x-axis (transverse direction), and the z-axis (vertical direction) were higher in the central and northwestern parts of the pasture at 3.0-4.5 m/s2 compared with other regions. Conclusions: The GIS map developed using information on posture angles and vibration accelerations by position in the pasture is considered sufficiently utilizable as data for selection of construction locations for pasture infrastructure improvement.

• 센서학회지
• /
• 제28권5호
• /
• pp.299-304
• /
• 2019

Recently, the development of rehabilitation medical technology has resulted in an increased interest in speech therapy equipment. In particular, research on articulation therapy for communication disorders is being actively conducted. Existing methods for the diagnosis and treatment of speech disorders have many limitations, such as traditional tactile perception tests and methods based on empirical judgment of speech therapists. Moreover, the position and tension of the tongue are key factors of speech disorders with regards to articulation. This is a very important factor in the distinction of Korean characters such as lax, fortis, and aspirated consonants. In this study, we proposed a Korean electropalatography (EPG) system to easily measure and monitor the position and tension of the tongue in articulation treatment and diagnosis. In the proposed EPG system, a sensor was fabricated using an AgCl electrode and biocompatible silicon. Furthermore, the measured signal was analyzed by implementing the bio-signal processing module and monitoring program. In particular, the bio-signal was measured by inserting it into the palatal from an experimental control group. As a result, it was confirmed that it could be applied to clinical treatment in speech therapy.