• Journal of Plant Biotechnology
• /
• v.40 no.4
• /
• pp.185-191
• /
• 2013

Over the past decades, carbon dioxide concentration of the atmosphere of the world has increased significantly, and thereby the greenhouse effect has become a social issue. To solve this problem, new renewable energy sources including solar, hydrogen, geothermal, wind and bio-energy are suggested as alternatives. Among these new energy sources, bio-energy crops are widely introduced and under rapid progress. For example, corn and oilseed rape plants are used for the production of bio-ethanol and bio-diesel, respectively. However, grain prices has increased severely because of the use of corn for bio-ethanol production. Therefore, non-edible switchgrass draws attention as an alternative source for bio-ethanol production in USA. This review describes the shortage of fossil energy and an importance of switchgrass as a bio-energy crop. Also, some characteristics of its major cultivars are introduced including growth habit, total output of biomass yields. Furthermore, biotechnological approaches have been conducted to improve the productivity of switchgrass using tissue culture and genetic transformation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1081-1086
• /
• 2014

An experimental study was performed in order to compare with the case of using pure diesel the characteristics of combustion pressure and exhaust emissions when the engine speed was changed in a CRDI 4-cylinder diesel engine using biodiesel( Canola oil) blended and pure diesel fuel. As a results, the combustion pressure was decreased with increasing biodiesel blended rate when engine speed was 1,000, 1,500, 2000(rpm). but the combustion pressure of the engine speed 2,500rpm was increased with increasing biodiesel blended rate. The emission results show, that CO was decreased with increasing biodiesel blended rate and engine speed. The emission of $CO_2$, NOx, were increased with increasing biodiesel blended rate and engine speed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.762-767
• /
• 2016

High thermal efficiency and the ability to use various types of fuel are a few of the many advantages of diesel engines. However, a major disadvantage is that their exhaust emissions are more harmful to humans and the environment than that of conventional engine. Consequently, the provisions of the international emissions standards for diesel engine equipped passenger cars, commercial vehicles, and ships have become more stringent. These standards include the EU Euro 6, the IMO MEPC Tier 3, and the US EPA Tier 4. Ryu et al. published a study that applied fuel additives to two-stroke diesel engines. In this study, a four-stroke diesel engine using diesel oil for a generator is utilized as the test subject, and an experiment is performed to verify whether fuel additive can be used to improve performance and exhaust emissions. In addition, this experimental study presents research results for the application of fuel additives in both two-stroke and four-stroke diesel engines. The experimental results were compared and analyzed by placing an oil-soluble calcium-based organometallic compound in diesel oil. The results confirmed that the addition of fuel additive improved the performance (fuel consumption rate, exhaust gas temperature) and exhaust emissions (NOx, CO) of the diesel engine.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.243.2-243.2
• /
• 2010

현재 바이오디젤(Bio diesel)은 유지와 메탄올을 염기촉매를 넣고 전이에스테르화(Trans-esterification)반응하여 생산한다. 생산된 1세대 바이오 디젤은 분자 내 산소가 다량 함유되어 여러 가지 단점을 가지기 때문에 전이에스테르화 반응을 대체한 탈산소(Deoxygenation)반응이 주목 받고 있다. 본 연구에서는 유리지방산(Free fatty acid, FFA)인 올레익 산(Oleic acid)의 탈산소반응을 수행하였다. 하이드로탈사이트(Hydrotalcites) 구조인 MgO-$Al_2O_3$(MgO=70 wt%)를 6시간 동안 $500^{\circ}C$에서 예비소성(Pre-calcination)하여 담체로 사용하였다. 제조된 MgO-$Al_2O_3$ 담체에 함침법(Incipient wetness method)으로 20 wt% Ni을 담지 시켰다. 제조된 Ni/MgO-$Al_2O_3$촉매는 소성온도를 변화시켜 반응 실험을 수행하였다. TPR 분석을 통해 산화-환원특성을 분석하였고 생성물의 원소분석을 통해 생성물의 산소함량을 측정하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.806-812
• /
• 2009

Availability of reliable and affordable energy supply is a prerequisite for economic growth. Renewables are the third largest contributor to global electricity production after coal and natural gas and account for a share of 18%. Power generating capacity from renewables has increased to around 900GW by the year 2007. Today biodiesel fuels have been in commercial use in many countries and recently the world-wide biodiesel market has experienced considerable growth, which is partly due to various tax concession programs and other financial incentives. In Korea, biodiesel has already been used for transportation fuel, but not used for power generation fuel yet. Korean government has a strategy for renewable energy propagation, especially the goal of power generation amount by renewable energy is 3% of total power production by 2012. This paper focuses on the feasibility study for adaptability and strategy of using biodiesel as power generation fuel. The study also has the plan to replace the fuel of thermal power plant, gas turbine and distributed power system. As the increase of biodiesel fuel, I look forward to environment-friendly power generation and the strategy of Renewable Portfolio Standards(RPS).

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.178.2-178.2
• /
• 2011

바이오디젤이란 식물성 기름, 동물성 지방, 폐식용유 등의 재생 가능한 자원을 촉매 존재 하에 알코올과 반응시켜 생성되는 에스테르 혼합물을 말하며 경유와 물성이 유사하므로 경유에 혼합하여 압축착화 방식인 디젤엔진에 사용할 수 있다. 그러나 바이오디젤은 경유에 비하여 탄소-탄소 간 이중결합을 가지고 있는 성분을 많이 함유하고 있기 때문에 공기에 의해 산화가 일어나기 쉽다. 일반적으로 폐놀계 향산화제인 t-buthylhydroquinone(TBHQ)를 사용하여 산화안정성을 향상시키나 국내에서 사용되는 산화방지제는 전량 수입에 의존하고 있어 제품 개발에 의한 국산화가 시급한 실정이다. 본 연구에서는 폐유지로부터 생산한 바이오디젤의 산화안정성 향상을 위하여 폐놀 및 아민계 등의 산화방지제를 합성하여 바이오디젤에 적용하였으며, 다양한 물성시험방법을 적용하여 석유 및 석유대체연료 사업법에서 규정하는 바이오디젤의 품질기준을 확인하였다. 또한 EN 14112 바이오디젤 산화안정성 시험방법으로 폐놀 및 아민계 등의 산화안정성을 확인하였다. 본 연구는 산학연 공동기술개발 1차년도 사업으로 한국화학연구원과 공동으로 수행하였으며, 산화방지제 적용평가를 통해 우수한 제품을 선정하여 2차년도에는 차량 테스트를 통해 연료 첨가제로서의 적합성을 검증할 예정이다.

• New & Renewable Energy
• /
• v.5 no.1
• /
• pp.32-39
• /
• 2009

Availability of reliable and affordable energy supply is a prerequisite for economic growth. Renewables are the third largest contributor to global electricity production after coal and natural gas and account for a share of 18%. Power generating capacity from renewables has increased to around 900GW by the year 2007. Today biodiesel fuels have been in commercial use in many countries and recently the world-wide biodiesel market has experienced considerable growth, which is partly due to various tax concession programs and other financial incentives. In Korea, biodiesel has already been used for transportation fuel, but not used for power generation fuel yet Korean government has a strategy for renewable energy propagation, especially the goal of power generation amount by renewable energy is 3% of total power production by 2012. This paper focuses on the feasibility study for adaptability and strategy of using biodiesel as power generation fuel. The study also has the plan to replace the fuel of thermal power plant, gas turbine and distributed power system. As the increase of biodiesel fuel, I look forward to environment-friendly power generation and the strategy of Renewable Portfolio Standards(RPS).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.5
• /
• pp.19-25
• /
• 2012

This study describes effects of DME additives on combustion and exhaust emissions characteristics including nano-particle in a single cylinder compression ignition engine. Considered additives include bio-diesel, n-butanol, and MTBE for increasing kinematic viscosity. Among three additives, n-butanol showed the greatest kinematic viscosity. In addition MTBE showed the highest vapor pressure. In the present study mixing ratios of additives were kept constant at 1 and 10% by volume. Experiments were performed at 1200rpm engine speed and nano-particles were measured by SMPS (Scanning mobility particle sizer) devices. Results of combustion characteristics showed that considered additives had little effects on combustion pressure. However, patterns of heat release rate were dependent on properties of additives. Nano-particles of MTBE were the lowest among considered additives.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.527-527
• /
• 2009

1세대 바이오디젤인 fatty acid methyl ester(FAME)의 문제점을 극복하기 위하여 많은 연구가 진행 중 이다. 소위 차세대 바이오디젤은 triglyceride의 산소 화합물을 제거하여 정유 공정을 통해 생산된 디젤과 동일한 특성을 지닌 탄화수소로 전환시킨 오일이다. 이를 위하여 수소를 첨가하여 산소를 제거 시키는 Hydrodeoxygenation(HDO) 반응이 필요하다. 고온($300-400^{\circ}C$), 고압(50-100 bar)의 혹독한 조건에서 높은 수율과 안정성을 보이는 촉매 개발이 필요하다. 이를 위하여 반응물중의 산소를 효과적으로 제거하기 위하여 산소 전달능이 뛰어난 $CeO_2$ 담체에 열안정성을 높이는 $ZrO_2$를 조합한 $Ce-ZrO_2$ 담체를 선정하였으며 수소첨가 탈산소 반응에 활성을 나타낼 것으로 예상되는 니켈을 활성성분으로 선정하였다. 본 연구에서는 15%Ni-$Ce_{(1-x)}Zr_{(x)}O_2$ ($0{\leq}x{\leq}1$)촉매를 공침법(co-precipitation)으로 제조하였으며 $500^{\circ}C$에서 소성하였다. 촉매 특성분석은 XRD, BET, H2-TPR을 이용하였다.

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.344-347
• /
• 2012

The basic strength of the MgO catalyst was enhanced by impregnating it with KF to synthesize a highly active catalyst for the bio-diesel production. To increase basicity, KF impregnated on synthesized MgO in laboratory. The synthesized catalyst was characterized using $N_2$ adsorption-desorption, X-Ray diffraction, X-Ray fluorescence, and $CO_2$ temperature programmed desorption analyses. Bio-diesel was produced from soybean and methanol and its fatty acid methyl ester content was measured to evaluate the activity of the catalyst. The catalyst impregnated with 30 wt% KF exhibited the highest activity, which was attributed to its abundant intermediate base site.