• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.250-255
• /
• 2010

This paper presents a non-contact measurement method of vital signal by the use of multiple-input multiple-output (MIMO) bio-radar system, configured with two antennas that are separated by a certain distance. The direction of arrival (DOA) estimation algorithm for coherent sources was applied to detect vital signals coming from different spatial angles. The proposed MIMO bio-radar system was composed of two identical transceivers sharing single VCO with a PLL. In order to verify the performance of the system, the DOA estimation experiment was completed with respect to the human target at angles varying between $-50^{\circ}$ and $50^{\circ}$ where the bio-radar system was placed at distances (corresponding to 50 cm and 95 cm) in front of a human target. The proposed MIMO bio-radar system can successfully find the direction of a human target.

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.897-906
• /
• 2020

This research focuses on the physicochemical characteristic of fermentation of Aloe Saponaria. The fermentation process applied in this study had 2 variation, depends on the aloe part as the materials (bottom, middle, and tip) and the initial sugar content (24% and 0%) used. Tests are conducted using uinkin fermented powder, sugar, salt, and distilled water as fermenting agent. The results indicate that change in physicochemical properties of aloe's skin was larger than in aloe's gel as fermentation materials. In contrast, there was no significant change in aloe's leaf during the process. A lso, aloes with intial sugar condition of 24% show better results than which without sugar addition in fermentation.

• 산업식품공학
• /
• 제21권3호
• /
• pp.233-241
• /
• 2017

Scaffolds of cell substrates are biophysical platforms for cell attachment, proliferation, and differentiation. They ultimately play a leading-edge role in the regeneration of tissues. Recent studies have shown the potential of bioactive scaffolds (i.e., osteo-inductive) through 3D printing. In this study, rice bran-derived biocomposite was fabricated for fused deposition modeling (FDM)-based 3D printing as a potential bone-graft analogue. Rice bran by-product was blended with poly caprolactone (PCL), a synthetic commercial biodegradable polymer. An extruder with extrusion process molding was adopted to manufacture the newly blended "green material." Processing conditions affected the performance of these blends. Bio-filament composite was characterized using field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDX). Mechanical characterization of bio-filament composite was carried out to determine stress-strain and compressive strength. Biological behaviors of bio-filament composites were also investigated by assessing cell cytotoxicity and water contact angle. EDX results of bio-filament composites indicated the presence of organic compounds. These bio-filament composites were found to have higher tensile strength than conventional PCL filament. They exhibited positive response in cytotoxicity. Biological analysis revealed better compatibility of r-PCL with rice bran. Such rice bran blended bio-filament composite was found to have higher elongation and strength compared to control PCL.

• Journal of Ecology and Environment
• /
• 제41권7호
• /
• pp.191-201
• /
• 2017

Background: Limited availability of corn stover due to the competing uses (organic manure, animal feed, bio-materials, and bioenergy) presents a major concern for its future in the bio-economy. Furthermore, biomass research has exhibited different results due to the differences in the supply of enzymes and dissimilar analytical methods. The effect of the two leading pretreatment techniques (dilute acid and alkaline) on glucose yield from three corn stover fractions (cob, stalk, and leaf) sourced from a single harvest in Uganda were studied at temperatures 100, 120, 140, and $160^{\circ}C$ over reaction times of 5, 10, 30, and 60 min. Results: From this study, the highest glucose concentrations obtained from the dilute acid (DA) pretreated cobs, stalks, and leaves were 18.4 g/L (66.8% glucose yield), 16.2 g/L (64.1% glucose yield), and 11.0 g/L (49.5% glucose yield), respectively. The optimal pretreatment settings needed to obtain these yields from the DA pretreated samples were at a temperature of $160^{\circ}C$ over an incubation time of 30 min. The highest glucose concentrations obtained from the alkaline (AL) pretreated cobs, stalks, and leaves were 24.7 g/L (81.73% glucose yield), 21.3 g/L (81.23% glucose yield), and 15.0 g/L (51.92% glucose yield), respectively. To be able to achieve these yields, the optimal pretreatment settings for the cobs and stalks were $140^{\circ}C$ and for a retention time of 30 min, while the leaves require optimal conditions of $140^{\circ}C$ and for a retention time of 60 min. Conclusions: The study recommends that the leaves could be left on the field during harvesting since the recovery of glucose from the pretreated cobs and stalks is higher.

• Environmental Engineering Research
• /
• 제21권2호
• /
• pp.109-120
• /
• 2016

Conventional treatment techniques cannot meet the stringent modern water quality regulations emanating from the need to provide high quality drinking water. Therefore, a number of studies have suggested low pressure membrane filtration as a worthwhile alternative. However, a major constraint to the extensive use of this technology in low and middle income countries is the high operating and maintenance costs caused by the inherent predisposition to membrane fouling. Notwithstanding, pretreatment of feed water using techniques such as coagulation, adsorption, oxidation and bio-filtration is believed to control fouling. In this review paper, the existing scientific knowledge on membrane fouling and pretreatment techniques for controlling fouling in low pressure membranes is analyzed with the aim of providing new and valuable insights into such techniques, as well as unveiling crucial issues noteworthy for further studies. Among the techniques reviewed, coagulation was observed to be the most cost-effective and will remain the most dominant in the coming years. Although oxidants and magnetic ion exchange resins can also control fouling, the propensity of oxidants to form health treating precursors and the high economic implications of magnetic ion exchange resins will hinder their adoption in developing countries.

• Mycobiology
• /
• 제33권4호
• /
• pp.178-181
• /
• 2005

Cordyceps militaris specimens were continuously collected by Entomopathogenic Fungal Culture Collection (EFCC), Kangwon National University from different mountains, national parks and recreation parks of Korea from 1986 to 2002, mainly from late May to October of each year. Dry specimens of C. militaris along with their isolates have been preserved in EFCC. Fruiting of C. militaris was induced from single ascospore isolates as well as their combinations in brown rice medium. Fruiting experiments showed that combinations of single ascospore isolates produced fertile fruiting bodies, but single isolates could not produce any fruiting bodies. It was shown that two isolates of the opposite mating types were required to produce fertile stromata. However, combinations of the same mating type isolates produced no fruiting body, showing that C. militaris is a bipolar, heterothallic fungus.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.634-634
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.1059-1062
• /
• 2012

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.121-129
• /
• 2011

The concept of bio-housing comes from the new social and culture housing trends. Previous research have shown standards on performance criteria for bio-housing. However some criteria on that research were overlapped because they were merged from various current housing assessment systems. This current research looks on the duplication of criteria which were impossible to evaluate current housing assessment, and make specialized factors for bio-housing developments. Finally the research shows the magnitude of factors for bio-housing performance criteria.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제3권2호
• /
• pp.61-66
• /
• 1998

Glycolipids produced by Pseudomonas aeruginosa YPJ-80 were characterized by chromatographic and spectorscopic techniques as a mixture of two rhamnolipids. For recovery of glycolipids from the culture broth, various isolation methods including ultrafiltration, adsorption and solvent extraction were compared. Ultrafiltration showed the best results in terms of glycolipids recovery. Further purification for spectroscopic analysis was carried out by adsorption chromatography and preparative thin layer chromatography. From the spectroscopic analysis, such as IR spectroscopy. FAB-MS, 1H-NMR and 13C-NMR and hydrolysis analysis, the glycolipids were identified as L-${\alpha}$-rhamnopyranosyl-${\beta}$-hydroxydecanoly-${\beta}$-hydroxydecanoate and 2-O-${\alpha}$-L-rhamnopyranosyl-${\alpha}$-L-rhamnopyranosyl-${\beta}$-hydroxydecanoyl-${\beta}$-hydroxydecanoate. Monorhamnolipid and dirhamnolipid lowered the surface tension of water to 28.1 mN/M and 29.3 mN/m, respectively.