• Journal of Power System Engineering
• /
• v.6 no.3
• /
• pp.11-16
• /
• 2002

This paper describes the power performance and emission characteristics of the high speed direct injection diesel engine (2.9 litter displacements) driven by soybean oil asknown a bio diesel fuel. The results were compared to diesel fuel with blending bio diesel fuels. The soybean bio diesel fuel was added in the diesel fuel in concentration varying from 25% to 75% volume rates. We measured the emissions according to ECE 13 mode and full load, fixedengine speed. When the 25% bio diesel fuel was used, NOx emission at the ECE 13 mode test slightly decreased compared with diesel base engine. Over engine speed of 2000 rpm, the level of unburned hydrocarbon(HC) and carbon monoxide(CO) were the same to the diesel engine. Smoke emission decreased asthe blending bio diesel fuel rate increased.

• Journal of Korean Society on Water Environment
• /
• v.21 no.4
• /
• pp.398-402
• /
• 2005

The enzyme Xeronine was investigated as a microbial activating substance in biological wastewater treatment processes. Xeronine as bio-stimulant was injected in the anaerobic sludge and the activated sludge treating wastewater in order to examine the effect of hidden benefits. Bio-stimulant did not show significant improvement of anaerobic treatablity. In the aerobic system, higher bio-stimulant dose condition resulted in slightly more removal of nitrogen and phosphorus. Floc aggregation and zone settling velocity as solid-liquid separation factors in activated sludge systems was enhanced by bio-stimulant. Effects of bio-stimulants injection on improvement of water quality and microbial activity did not clear in terms of normal operation conditions.

• Proceedings of the KIEE Conference
• /
• 2006.05a
• /
• pp.27-32
• /
• 2006

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.767-769
• /
• 2002

A novel RE configurable device composed by bare-chip, bumps and board are proposed. We call this "Field-Programmable RF Gate Array (FPRA)," This device, a kind of programmable system packages, has a potential to be applied to wireless communication terminals such as software-defined radio.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.4
• /
• pp.57-63
• /
• 2008

The characteristics of the bio-oil produced by the pyrolysis process with pig feces was investigated in this paper. The continuous auger-type reactor produced bio-oil was maintained at the temperature range of 400 to $600^{\circ}C$, which was higher than a typical that in a conventional pyrolysis system. The pig feces was used as the feedstock. The bio-oil and its compositions were characterized by water analysis, heating values, elemental analysis, bio-oil compounds, by Gas Chromatography/Mass Spectrometry (GC/MS), and functional group by $^1H$ NMR spectroscopy. It was found that the maximum bio-oil yields of 21% w.t. was achieved at $550^{\circ}C$. This result suggested that this auger reactor might be a potential technology for livestock waste treatment to produce bio-oil because it is able to be improved to reach higher efficiency of bio-oil production in further study. The pyrolysis system reported herein had low heat transfer into the feedstock in the auger reactor so that it needs improve the heat conduction rate of the system in further study.

• Journal of Biosystems Engineering
• /
• v.37 no.2
• /
• pp.106-112
• /
• 2012

Purpose: A lab-scale timber carriage using a servo motor system was built. When two motors move a carriage, wire tension is changed according to the different line speeds caused by a wire drum's changing diameter, leading to inappropriate traveling characteristics of the carriage. In order to overcome this problem, PID Control was used to control the motor speed. Methods: Ziegler-Nichols method was used to determine PID gains. Results: The initial PID gains were 1.8, 0.025, and 0.006, respectively, and optimal gains of 1.4 and 0.010 for P and I gain were obtained experimentally. Conclusions: The results showed that constant wire tension could be maintained by controlling the speed of the motor using PI control. Overshoot occurred at initial motor operation due to vibration and elasticity of the wire itself.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.347-347
• /
• 2017

This study is performed to investigate the optimal cropping systems to allow cultivation of upland crops to the paddy rice land. This experiment was conducted at Anseong-si Gyeonggi province of Korea in 2015. In order to investigate growth and yield characteristics of foxtail millet, proso millet and sorghum by different paddy-upland rotation systems, three crops foxtail millet, proso millet and sorghum with four varieties of Samdachal, Samdamae, Kyeongkwan1, Hwanggeumjo in foxtail millet, Leebaekchal, Manhongchal, Hwangsilchal, Hwanggeumgijang in proso millet and Nampungchal, Moktaksusu, Aneunbangisusu, Hwanggeumchal in sorghum were examined. Four paddy-upland rotation systems of paddy-upland rotation, paddy-upland-upland rotation, paddy-upland-upland-upland rotation, and upland-paddy-upland rotation system were tested. Days from seeding to heading and ripening of foxtail millet was the shortest in the paddy-upland-upland-upland rotation system, but proso millet and sorghum did not show statistical difference among four rotation systems. In the average of culm length, paddy-upland-upland-upland rotation system showed the highest culm length in foxtail millet (141.5cm), proso millet (159.6cm) and sorghum (138.6cm) respectively among four paddy-upland rotation systems. In average yield per 10a, foxtail millet and proso millet showed the highest each 234.3kg/10a, 176.2kg/10a in paddy-upland-upland-upland rotation system, whereas sorghum was the highest 221.2kg/10a in paddy-upland-upland rotation system. The most suitable crop and varieties in paddy-upland rotation system was judged to be sorghum among three crops and suitable varieties were Samdachal in foxtail millet, Leebaekchal in proso millet and Nampungchal in sorghum respectively.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.2
• /
• pp.86-92
• /
• 2004

In this paper miniaturized disposable micro/nanofluidic components applicable to bio chip, chemical analyzer and biomedical monitoring system, such as blood analysis, micro dosing system and cell experiment, etc are reported. This system includes various microfluidic components including a micropump, micromixer, DNA purification chip and single-cell assay chip. For low voltage and low power operation, a surface tension-driven micropump is presented, as well as a micromixer, which was implemented using MEMS technology, for efficient liquid mixing is also introduced. As bio-reactors, DNA purification and single-cell assay devices, for the extraction of pure DNA from liquid mixture or blood and for cellular engineering or high-throughput screening, respectively, are presented.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.737-741
• /
• 2008

The indoor environment has an effect on heath of human in indoor room that they live largely. We will know Bio-Aerosol that causes illness, such as a flu, an asthma and an atopy etc. and see a relationship between Bio-Aerosol and temperature as an experiment in Air-Conditioned room. In the future, this data can use a basic data for an effect of Bio-Aerosol on indoor environment.

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.132-139
• /
• 2005

Wireless bio-signal sensing system, which is based on the principle of Doppler radar, can measure a respiration and heart rates with a periodic movement of skin and muscle near the heart. Though the sensing monostatic system using a circulator has been studied, this bistatic system can be improved by using a circular polarized antenna which has a high isolation between transmitter and receiver. In this paper, we measured the bio-signal without the direct contact with the person. The design of each system and experimental results are discussed.