• Elastomers and Composites
• /
• 제57권4호
• /
• pp.197-204
• /
• 2022

Recently, the demand has increased for protective clothing materials capable of shielding the wearer from bullets, fragment bullets, knives, and swords. It is therefore necessary to develop light and soft protective clothing materials with excellent wearability and mobility. To this end, research is being conducted on hybrid design methods for various highly functional materials, such as carbon nanotube (CNT) sheets, which are well known for their low weight and excellent strength. In this study, a hybrid protective material using CNT sheets was developed and its performance was evaluated. The material design incorporated a bonding method that used a binder for interlayer combination between the CNT sheets. Four types of binders were selected according to their characteristics and impregnated within CNT sheets, followed by further combination with aramid fabric to produce the hybrid protective material. After applying the binder, the tensile strength increased significantly, especially with the phenoxy binder, which has rigid characteristics. However, as the molecular weight of the phenoxy binder increased, the adhesive force and strength decreased. On the other hand, when a 25% lightweight-design and high-molecular-weight phenoxy binder were applied, the backface signature (BFS) decreased by 6.2 mm. When the CNT sheet was placed in the middle of the aramid fabric, the BFS was the lowest. In a stab resistance test, the penetration depth was the largest when the CNT sheet was in the middle layer. As the binder was applied, the stab resistance improvement against the P1 blade was most effective.

• 한국건설순환자원학회논문집
• /
• 제3권1호
• /
• pp.64-71
• /
• 2015

초고강도 콘크리트의 혼화재로는 일반적으로 실리카퓸(SF)을 사용한다. 실리카퓸은 강도, 내구성 측면에서 유리하나 제조원가를 상승시키는 원인이 된다. 따라서 본 연구에서는 80MPa급 초고강도 콘크리트의 제조원가를 낮추기 위하여 실리카퓸 대신에 고로슬래그(BS)와 플라이애시(FA)에 대해 검토하였다. 실험은 모르타르 배합으로 결합재 조합, 물-결합재비 및 단위결합재량에 대해 검토하였고, 그 결과를 토대로 콘크리트 배합설계를 통하여 물성에 대하여 검증하였다. 그 결과 압축강도 80MPa를 달성하기 위한 결합재는 OPC 60% BS 30%, FA10%로 구성하고, 물-결합재비는 21%, 단위 결합재량은 $720kg/m^3$이 적절한 것으로 분석되었다. 상기 도출된 결합재 조합, W/B 및 단위 결합재량을 반영한 콘크리트 배합에서 슬럼프 플로우는 715mm, 28일 압축강도는 97MPa로 양호하게 나타났다. 본 연구에서 도출한 결합재 조합을 사용하는 경우 실리카퓸을 사용한 결합재에 비하여 동등한 성능을 발휘하면서 약 50%의 결합재 비용을 절감할 수 있는 것으로 분석되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.152-153
• /
• 2014

Recently, there are many research for increasing tensile strength of concrete using fiber-reinforced mortar. Especially, the research about the high ductile concrete with fiber-reinforcement which behaves strain-hardening (defined as HPFRCC) is performed while it has the drawback of decreasing workability because of interruption of fibers such as fiber-ball effect. Hence to solve this problem, as a previous research, combination of metal fiber and organic fiber was suggested. Although this research achieved favorable result of workability of HPFRCC, the research scope was concentrated on workability of the mortar. Therefore, in this research, based on the fiber-combination of previous research, the tensile properties is evaluated depending on water-to-binder ratios to obtain improved tensile performance.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권1호
• /
• pp.137-143
• /
• 2006

The purpose of this study was to prepare a binder containing porcine blood transglutaminase (TGase), thrombin and fibrinogen. Extracted TGase, thrombin and fibrinogen were used alone or mixed with different proportions of their volume (v/v/v) by nine combinations as follows were 0.5:1:15, 0.5:1:20, 0.5:1:25, 1:1:15, 1:1:20, 1:1:25, 1.5:1:15, 1.5:1:20 and 1.5:1:25, respectively. Five ml of each combination were mixed with 0.6 ml of 0.25 M calcium chloride before experiment. After storage at 4C for 0, 1, 2, 3, 4 and 5 weeks, enzyme activity, total plate count, pH value, and SDS-PAGE of TGase, thrombin and fibrinogen were tested and pH value, clotting time and gel strength of the nine combination binders were determined. The results showed that total plate count of thrombin and pH value of TGase were significantly higher (p<0.05) than in other treatments. SDS-PAGE results showed that purified TGase, thrombin and fibrinogen from porcine blood plasma compared with commercial products (Sigma) had the same band patterns and nine different combination binders had no significant effect. Enzymatic activity of TGase and thrombin decreased as storage time increased. Total plate count of TGase, thrombin and fibrinogen and clotting time of the binder increased as storage time increased. The higher amount of fibrinogen in combinations, the stronger the gel strength.

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.471-477
• /
• 1999

Fe and Fe-Mo binder were used to produce TiB2 based cermet by a pressureless sintering. The densification behaviour of TiB2-Fe-Mo cermet during liquid-phase sintering in argon was studied in relation to binder phase charactertics. The effects of Mo addition and sintering condition on the sintering behaviour and mechanical properties were also investigated. TiB2-based cermets with Fe-Mo binder composition showed a better sinterability than the cermets with only Fe binder. In TiB2-Fe-Mo cermet higher densities in the wide temperature range were obtained and also fully densified sintered cermet were obtained at 1873K The enhancement in the densification phenomenon of TiB2-Fe-Mo system can be explained by improved liquid phase wettability associated with the roles of Mo components as solute atoms. When Fe-Mo binders were used cermets with a finer grain size and enhanced mechanical properties wereproduced and new phases such as Fe2B and Mo2FeB2 were observed in the sintered cermet. The highest bending strength was obtained from the 20vol% Fe-Mo cermet and these hardness-fracture toughness combination in the wide binder compositions is better than that of TiB2-Fe cermet. In order to improve mechanical properties microstructure control with high purity powders is desirable because high purity powders prevent the formation of Fe2B and Mo2FeB2 phase which comsume the ductile binder phase.

• 보존과학회지
• /
• 제35권4호
• /
• pp.363-372
• /
• 2019

Animal glue has been used as a binder in Dancheong since the Joseon dynasty. Binders play an important role in determining the physical characteristics of a painting layer. The analysis of binders can be used to identify the materials and techniques used in traditional Dancheong. Binders can be investigated using physicochemical component analyses methods such as gas chromatography/mass spectrometry, pyrolysis-gas chromatography/mass spectrometry, and fourier transform infrared spectroscopy, but the detection characteristics vary depending on the degradation properties of the pigment and binder. Therefore, cross-validation using a combination of physicochemical analysis and enzyme immunoassay is used to increase the reliability of the results. In this study, we present an enzyme-linked immunosorbent assay (ELISA) as an example of an enzyme immunoassay as a method for analyzing animal glue, a traditional binder used in Korea. The applicability of ELISA was tested using commercial animal glue, in addition to animal glue produced using a variety of extraction conditions. The animal glue was analyzed in a Noerok-additionally coated-replica sample to evaluate the possibility of analyzing the animal glue in a paint layer mixed with pigment. Based on the results, we performed an assay on the use of animal glue in the Dancheong sample of the temples of the Joseon dynasty, that are estimated to have been built in the 17^th century.

• 대한환경공학회지
• /
• 제37권9호
• /
• pp.499-504
• /
• 2015

팽창흑연과 탄소나노튜브를 이용한 산화전극을 CTP에 Ni을 혼합한 결합제로 제작하였으며, 산화전극에 CTP와 Ni을 혼합한 결합제와 Nafion 결합제를 대조구로 미생물연료전지의 성능에 미치는 영향을 회분식 실험을 통하여 조사하였다. 산화전극 제작에 사용된 CTP 양이 적을수록, Ni 함량이 증가할수록 산화전극 표면에 부착성장한 미생물량이 증가하였으며, 내부저항이 감소하였다. CTP 4 g과 Ni 0.2 g을 혼합한 결합제로 제작한 산화전극의 경우 최대전력밀도는 $731.8mW/m^2$, 내부저항은 $146.19{\Omega}$이다. 대조구인 Nafion결합제로 제작한 산화전극와 비교하여 최대전력밀도는 23.68% 컸으며, 내부저항은 33.82% 낮았다. 따라서, CTP와 Ni을 혼합한 물질은 저렴하고 효율이 높은 미생물연료전지의 산화전극결합제로서 좋은 대안이 될 수 있다.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.56-61
• /
• 2020

Fuel economy has always been a major issue in the automobile industry, especially owing to the associated environmental concerns. It is widely known that only 5-20% of the energy generated by automobiles running on internal combustion engine engines is used as power, while the rest is consumed because of friction between components. The main components of the reciprocating piston type compressor used in vehicles, such as the shaft, swash plate, piston, and cylinder, cause severe energy loss owing to frictional contact between each other. The wear contact between the main shaft and the other components is particularly severe. Most quality issues arise owing to the sticking phenomenon that occurs between these parts. In this study, a coating solution to reduce friction is prepared by mixing adhesive solid lubricant, organic binder-polyadimide, inorganic binder (Binder), and graphite in four different ratios, and the best combination is determined.

• Advances in nano research
• /
• 제16권3호
• /
• pp.217-229
• /
• 2024

This paper presents results of visual analysis of cracks formation and propagation of concretes made of quaternary binders (QBC). A composition of the two most commonly used mineral additives, i.e. fly ash (FA) and silica fume (SF) in combination with nanosilica (nS), has been proposed as a partial replacement of the cement. The principal objective of the present study is to achieve information about the effect of simultaneous incorporation of three pozzolans as partial replacement to the OPC on the fracture processes in concretes made from quaternary binders (QBC). The modern and precise non-contact measurement method (NCMM) via digital image correlation (DIC) technique was used, during the studies. In the course of experiments it was established that the substitution of OPC with three pozzolans including the nanoadditive in FA+SF+nS FA+SF+nS combination causes a clear change of brittleness and behavior during fractures in QBCs. It was found that the shape of cracks in unmodified concrete was quasi-linear. Substitution of the binder by SCMs resulted in a slight heterogeneity of the structure of the QBC, including only SF and nS, and clear heterogeneity for concretes with the FA additive. In addition, as content of FA rises throughout each of QBC series, material becomes more ductile and shows less brittle failure. It means that an increase in the FA content in the concrete mix causes a significant change in fracture process in this composite in comparison to concrete with the addition of silica modifiers only.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.32-38
• /
• 2000

This study was carried out to determine the effect of the type of plastic pigment on the coat-ing structure and printability of coated paper. Three kinds of plastic pigments(solid-bead type binder type and hollow type) were used for hti purpose. IN this research it was observed that particle shape and structure of plastic pigment had influenced the rheology of coating color the state of packing and the properties of coated paper. Inorganic pigments used in this research were platelike kaolin clay and rhombic calcium carbonate. Three kinds of plastic pigments were blended with two inorganic pigments respec-tively. The combination of pigments were carried out(1) to determined the effect of particle structure of plastic pigment on the state of dispersion of coating color(2) to observe the effect of calendering temperature on the property of coated paper prepared with different plastic pigments. The data indicated that binder and hollow type plastic pigment gave the best results in improving the properties of coated paper such as paper gloss opacity and air pet-meability.