• 한국안전학회지
• /
• 제29권6호
• /
• pp.76-80
• /
• 2014

The flash point is one of the most important physical properties used to determine the fire hazard of flammable liquid mixture and defined as the lowest temperature at which a liquid produces sufficient vapor to form a combustible mixture with air. The main purpose of this paper is to measure and predict the flash point of binary flammable miscible mixtures. The flash points for n-hexanol+n-butyric acid and n-butanol+propionic acid, were measured by using Seta-flash closed cup method. The experimentally derived data were correlated with the binary interaction parameters of the van Laar and NRTL equations through the optimization method. The flash points estimated by these correlations were compared with those calculated by the method based on Raoult's law. The optimization method were found to be better than the method based on the Raoult's law.

• 한국가스학회지
• /
• 제19권3호
• /
• pp.18-24
• /
• 2015

인화점은 액체 용액의 가장 중요한 인화성 지표 중 하나이다. 인화점은, 가연성 증기의 공기 속 농도가 점화가 발생하기에 충분할 때의 온도 중 가장 낮은 온도이다. 본 연구에서는 가연성 이성분계 액체 용액인, 2-propanol+propionic acid 와 n-hexanol+formic acid 계의 인화점을 Seta flash 밀폐식 장치를 사용하여 측정하였다. 특히 n-hexanol+formic acid 계는 최소 인화점 현상을 보였다. 측정값은 라울의 법칙을 활용한 방법과 최적화 기법에 의한 계산값과 비교되었다. 그 결과 최적화 기법에 의한 계산값이 라울의 법칙에 의한 계산값 보다 측정값을 잘 모사하였다.

• 대한화학회지
• /
• 제11권4호
• /
• pp.143-149
• /
• 1967

액체 구조에 관한 천이상태 이론을 벤젠과 사염화탄소의 이성분 액체 혼합물에 적용시켰다. 각 성분의 상태합으로부터 액체 혼합물계의 상태합을 구하고, 이것으로부터 전체압, 부분압, 몰부파, 혼합엔트로피 및 압축율 등의 열역학적 성질을 여러 온도에서 계산하였다. 계산 결과는 문헌에서 얻은 실험값과 근사적으로 일치함을 발견하였다.

• 에너지공학
• /
• 제2권2호
• /
• pp.225-230
• /
• 1993

n-dodecane-1-decanol, n-dodecane-1-dodecanol 및 1-decanol-1-dodecanol계 의 14$0^{\circ}C$ 등온 기액평형 데이타를 static method로써 Head Space Gas Chromatography (H.S.G.C)를 이용하여 측정하였다. 액상의 비이상성을 고려하여 계산된 활동도계수는 Margules, Van Laar, Wilson, NRTL g$^{E}$ 모델을 이용하여 상관관계를 구하였으며, Redlich-Kister의 열역학적 일치성 시험을 통해 데이타의 신빙성을 확인하였다. 측정한 이성분계중 n-dodecane-1-decanol계는 최소 공비점을 가짐을 알 수 있었다.

• 공업화학
• /
• 제5권4호
• /
• pp.706-713
• /
• 1994

$45^{\circ}C$와 $65^{\circ}C$의 등온하에서 MTBE-methanol, MTBE-n-heptane, methanol-n-heptane 각 이성분계에 대한 등온 기액 평형 데이타를 head space gas chromatography(H.S.G.C.)를 이용해서 측정하였다. 이들중에 MTBE-methanol계와 methanol-n-heptane계에서 최소공비점이 발견되었으며, 특히 methanol-n-heptane계에서는 불용영역의 존재로 인한 불균일 최소공비점을 나타내었다. 각각의 실험 데이타들은 과잉 Gibbs 에너지 모델에 합치시켜서 그 상관관계를 알아보았으며, Redlich-Kister의 적분법에 의한 열역학적 일치성 시험도 수행하였다.

• Current Photovoltaic Research
• /
• 제9권4호
• /
• pp.137-144
• /
• 2021

In this study, the microstructure of the CVD-fabricated Cu(In,Ga)Se₂ (CIGSe) absorber layer by simulating the stacking sequence used in a co-evaporation method, and changes solar cell performance were investigated. The absorber layer prepared by stacking CuSe and (In,Ga)Se between InSe is separated into Ga-free CuInSe₂ and Ga-rich CIGSe, and transformed to CIGSe by selenization heat treatment with slight improvement in the the solar cell efficiency. However, in CVD, since the supply of liquid Cu-Se is not as active as in the co-evaporation method, the nanoocrystalline layer containing a large amount of Ga remained independently in the absorption layer, which acted as a cause of the loss of J_SC and FF. Therefore, by using a precursor structure in which CuGa is sputter-deposited on a single layer of InSe deposited by CVD, performance parameters of V_OC, J_SC, and FF could be greatly improved.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.289-299
• /
• 2004

Multi-walled carbon nanotubes (CNTs) were prepared by microwave plasma chemical vapor deposition (MPCVD) using various combination of binary catalysts and methane precursor. The maximum yield (10.3 %) of CNTs was obtained using a methane-hydrogen-nitrogen mixture with volume ratio of 1:1:2 at 1000 W of microwave power. As the microwave power increased up to 1000 W, the deposition yield of CNTs raised from 4.1 % to 10. 3 %. However, the prepared CNTs at 800 W showed the more crystalline structure than those prepared at 1000 W. The prepared CNTs over different binary catalysts had various structural conformations such as aligned cylinder, bamboo, and nanofibers. The Id/Ig value of CNTs over$Fe-Fe/Al_2O_3, $Co-Co/Al_2O_3, and $Co-Cu/Al_2O_3 were in the range of 0.89${\sim}$0.93. Among the various binary catalysts used, $Fe-Co./Al_2O_3 showed the highest yield.

• 한국결정성장학회지
• /
• 제19권1호
• /
• pp.39-47
• /
• 2009

The effects of thermo-solutal convection on mercurous chloride system of ${Hg_2}{Cl_2}$, and Ne during physical vapor transport are numerically investigated for further understanding and insight into essence of transport phenomena, For $10\;K{\le}{\Delta}T{\le}30\;K$, the growth rate slowly increases and, then is decreased gradually until ${\Delta}T$=50 K, The occurrence of this critical point near at ${\Delta}T$=30 K is likely to be due to the effects of thermo-physical properties stronger than the temperature gradient corresponding to driving force for thermal convection. For the range of $10\;Torr{\le}P_B{\le}300\;Torr$, the rate is second order-exponentially decayed with partial pressures of component B, $P_B$. For the range of $5{\le}M_B{\le}200$, the rate is second order-exponentially decayed with a function of molecular weight of component B, $M_B$. Like the case of a partial pressure of component B, the effects of a molecular weight arc: reflected through the binary diffusivity coefficients, which are intimately related with suppressing the convection flow inside the growth enclosure, i,e., transition from convection to diffusion-dominant flow mode as the molecular weight of B increases. The convective mode is near at a ground level, i,e., on earth (1 $g_0$), and the convection is switched to the diffusion mode for $0.1\;g_0{\le}g{\le}10^{-2}g_0$, whereas the diffusion region ranges from $10^{-2}g_0$ up to $10^{-5}g_0$.

• 대한화학회지
• /
• 제51권4호
• /
• pp.312-317
• /
• 2007

난수 모의실험을 수행하여 격자 위에 분자를 무작위하게 배열하는 경우의 수의 분포를 다른 분자간의 최근린 상호작용수 N12에 대한 정규분포로 근사하였다. 이 분포로부터 논랜덤 혼합 격자용액의 과잉깁스 에너지 GE에 대한 근사식을 유도하였다. 이를 이용하여 여러 이성분용액의 액체-증기 상평형 계산을 하였고 기존의 식들의 계산 결과와 비교하여 보았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.477-480
• /
• 2007

Hydrate phase equilibrium for the binary CO2+water and CH4+water mixtures in silica gel pore of nominal 6, 30, and 100 nm were measured and compared with the cacluated results based on van der Waals and Platteeuw model. At a specific temperature three-phase hydrate-water-vapor (HLV) equilibrium curves for pore hydrates were shifted to the higher-pressure condition depending on pore sizes when compared with those of bulk hydrates. Notably, hydrate phase equilibria for the case of 100 nominal urn pore size were nealy identical with those of bulk hydrates. The activities of water in porous silica gels were modified to account for capillary effect, and the calculation results were generally in good agreement with the experimental data.