• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.639-655
• /
• 2017

The binary mixture consists of two types of granular media with different physical attributes and sizes, which can be characterized by the percentage of large granules by weight (P) and the particle size ratio (${\alpha}$). Researchers determine that two thresholds ($P_S$ and $P_L$) exist for the peak shear strength of binary mixtures, i.e., at $P{\leq}P_S$, the peak shear strength is controlled by the small granules; at $P{\leq}P_L$, the peak shear strength is controlled by the large granules; at $P_S{\leq}P{\leq}P_L$, the peak shear strength is governed by both the large and small granules. However, the thresholds of binary mixtures with different ${\alpha}$ values, and the explanation related to the inner details of binary mixtures to account for why these thresholds exist, require further confirmation. This paper considers the mechanical behavior of binary mixtures with DEM analysis. The thresholds of binary mixtures are found to be strongly related to their coordination numbers $Z_L$ for all values of ${\alpha}$, where $Z_L$ denotes the partial coordination number only between the large particles. The arrangement structure of the large particles is examined when P approaches the thresholds, and a similar arrangement structure of large particles is formed in both 2D and 3D particle systems.

• Communications for Statistical Applications and Methods
• /
• 제28권1호
• /
• pp.89-97
• /
• 2021

Due to boundedness and sum constraint, compositional data are often transformed by logratio transformation and their transformed data are put into traditional binary classification or discriminant analysis. However, it may be problematic to directly apply traditional multivariate approaches to the transformed data because class distributions are not Gaussian and Bayes decision boundary are not polynomial on the transformed space. In this study, we propose to use flexible classification approaches to transformed data for compositional data classification. Empirical studies using synthetic and real examples demonstrate that flexible approaches outperform traditional multivariate classification or discriminant analysis.

• 대한기계학회논문집B
• /
• 제29권5호
• /
• pp.643-652
• /
• 2005

Saturated nucleate pool boiling experiments for binary mixtures, which are consisted of refrigerant R11 and R113, were performed with constant wall temperature condition. Results for binary mixtures were also compared with pure fluids. A microscale heater array and Wheatstone bridge circuits were used to maintain the constant temperature of the heating surface and to obtain heat flow rate measurements with high temporal and spatial resolutions. Bubble growth images were captured using a high speed CCD camera synchronized with the heat flow rate measurements. The departure time for binary mixtures was longer than that for pure fluids, and binary mixtures had a higher onset of nucleate boiling (ONB) temperature than pure fluids. In the asymptotic growth region, the bubble growth rate was proportional to a value between $t^{\frac{1}{6}}$ and $t^{\frac{1}{4}}$. The bubble growth behavior was analyzed to permit comparisons with binary mixtures and pure fluids at the same scale using dimensionless parameters. There was no discernable difference in the bubble growth behavior between binary mixtures and pure fluids for a given ONB temperature. And the departure radius and time were well predicted within a ${\pm}30{\%}$ error. The minimum heat transfer coefficient of binary mixtures occurred near the maximum ${\mid}y-x{\mid}$ value, and the average required heat flux during bubble growth did not depend on the mass fraction of R11 as more volatile component in binary mixtures. Finally, the results showed that for binary mixtures, a higher ONB temperature had the greatest effect on reducing the heat transfer coefficient.

• 한국대기환경학회지
• /
• 제23권1호
• /
• pp.64-73
• /
• 2007

The catalytic activity of transition metals (Cu, Co, Mn, Fe and Ni) supported on ${\gamma}-Al_2O_3$ for the oxidation of toluene was investigated in the microreactor of fixed-bed type. The catalytic activity of transition metals for the oxidation of toluene turned out to be increasing in the order of Ni$Cu/{\gamma}-Al_2O_3$ catalysts for the oxidation of toluene increased with the increasing loadings of copper, reached the maximum activity at 5% loadings of copper, and decreased with higher loadings of copper in the catalysts. The activity of $Cu/{\gamma}-Al_2O_3$ catalysts for the oxidation of toluene decreased with the increasing calcination temperatures. This might result from the decreasing surface area of catalysts due to the sintering of copper oxide as well as ${\gamma}-Al_2O_3$ supports. The 5wt% $Cu/{\gamma}-Al_2O_3$ catalysts calcined at $400^{\circ}C$ for 4 hrs in the air showed the highest activity for the oxidation of toluene. Mutual inhibition was observed for the binary mixture of toluene and xylene. The activity of the easy-to-oxidize toluene was greatly decreased while the difficult-to-oxidize xylene was slightly decreased in the binary mixture of toluene and xylene. It might suggest that the inhibition of toluene and xylene in the binary mixture resulted from the competitive adsorption for the adsorbed oxygen on the catalytic surface.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.723-731
• /
• 2000

유해유기화합물질 처리시 처리효율을 증대시키기 위하여, 본 연구에서는 GAC를 이용한 RSTA에서 phenol과 4-nitrophenol 의 경쟁흡착을 연구하였다. 이성분계 흡착등온시 phenol은 Freundlich 흡착동온식 적용이 불가능하였다. 그리고 활성탄 주입량이 적어짐에 따라 또 흡착질의 농도가 증가함에 따라 두 성분간의 경쟁흡착은 심화되었다. RSTA를 이용한 연속식 실힘에서는 유입유량이 감소할수록 두 성분간의 경쟁흡착성향은 증가하는 것으로 나타났다. 수축 각 변화에 따른 경쟁흡착실험에서는 수축각이 커질수록 파과시간이 증가하였으며, 활성탄 충전층 수를 변화시킨 실험에서는 충전층 수를 증가시킴에 따라 각 성분의 흡착효율 및 phenol에 대한 4-nitrophenol 경쟁흡착능은 증가하였다. RSTA에서의 이러한 성능 증대는 유체의 정제와 분리에 적용할 수 있을 것이다.

• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.371-379
• /
• 2005

활성탄 흡착제(Calgon co.)에 대하여 수소, 메탄 그리고 에틸렌의 단일성분 흡착평형과 이들의 혼합가스의 흡착평형을 정적부피법으로 293.15 K, 303.15 K 그리고 313.15 K의 온도와 18 atm의 압력 이하에서 측정하였다. 순수 기체의 흡착등온선을 이용하여 혼합성분의 흡착평형을 예측하였고 실험데이터와 비교하였다. 사용한 모델식은 확대 Langmuir 모델, 확대 Langmuir-Freundlich 모델, 이상 흡착 용액 이론 그리고 빈자리 용액 모델이다. 모델식들은 비교적 정확한 예측치를 보였으며, 이 중 확대 L-F 모델이 혼합 기체의 흡착평형을 다른 모델식보다 좋은 예측결과를 보여줬다.

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.453-461
• /
• 2022

A chemically sintered and binder-free paste of TiO₂ nanoparticles (NPs) was prepared using a binary-liquid mixture of 1-octanol and CCl₄. The 1:1 (v/v) complex of CCl₄ and 1-octanol easily interacted chemically with the TiO₂ NPs and induced the formation of a highly viscous paste. The as-prepared binary-liquid paste (P_BL)-based TiO₂ film exhibited the complete removal of the binary-liquid and residuals with the subsequent low-temperature sintering (~150℃) and UV-O₃ treatment. This facilitated the fabrication of TiO₂ photoanodes for flexible dye-sensitized solar cells (f-DSSCs). For comparison purposes, pure 1-octanol-based TiO₂ paste (P_O) with moderate viscosity was prepared. The P_BL-based TiO₂ film exhibited strong adhesion and high mechanical stability with the conducting oxide coated glass and plastic substrates compared to the P_O-based film. The corresponding low-temperature sintered P_BL-based f-DSSC showed a power conversion efficiency (PCE) of 3.5%, while it was 2.0% for P_O-based f-DSSC. The P_BL-based low- and high-temperature (500℃) sintered glass-based rigid DSSCs exhibited the PCE of 6.0 and 6.3%, respectively, while this value was 7.1% for a 500℃ sintered rigid DSSC based on a commercial (or conventional) paste.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.37-43
• /
• 1994

Commercial Poly(ethylene terephthalate) (PET) filaments were treated in solvents mixtures such as benzyl alcohol/perchloroethylene(BA/PER), benzyl alcohol/trichloroethylene(BA/TRI), benzyl alcohol/ethylene chloride(BA/EC), metha nol/perchloroethylene(ME/PER), and methanol/trichloroethyle(ME/TRI). Swelling of PET in solvent mixtures showed rapidly in the middle range of mixture ratio. Contribution of swelling of each component to total swelling of binary mixtures with increasing treated time was generally showed in proportion to the mixture ratio of the each component in dependence of the extend of swelling.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1991년도 추계 총회 및 학술발표회
• /
• pp.1-3
• /
• 1991

A novel membrane separation process for the separation of liquid mixture is Pervaporation. The term, 'pervaporation', is a combination of permeation and evaporation, and was first introduced by kober[1] in 1917. In this technique, the liquid mixture in feed is in contact with one side of a dense non-porous membrane and after diffusing through the membrane is removed from the downstream side in the vapor phase, but is usually condensed afterwards to obtain a permeate in liquid from.

• 대한화학회지
• /
• 제58권5호
• /
• pp.456-462
• /
• 2014

(+)-Camphorsulfonic acid (CSA)와 hydrochloric acid (HCl)로 binary 도핑된 키랄 polyaniline (PAni)을 중합온도 $0^{\circ}C$와 상온(RT)에서 전기화학적 중합법으로 합성하였다. 순환전압전류 곡선, FT-IR과 circular dichroism spectra로부터 PAni는 각각 (+)-CSA와 HCl로 single 도핑된 PAni 혼합물이 아닌, binary 도핑된 키랄 PAni임을 확인하였다. 중합온도가 전기화학적 거동과 도핑레벨에 영향을 주었고, 이에 따라서 PAni의 결정성과 모폴로지가 변화되는 것을 확인하였다. 중합온도가 $0^{\circ}C$에서 RT로 상승됨에 따라 키랄PAni의 모폴로지가 fibrous에서 short-fibrous구조로 변화되었다. ITO 위에 적층된 PAni필름의 면저항을 4-point probe 법으로 측정하였다.