• 한국재료학회지
• /
• 제17권7호
• /
• pp.390-395
• /
• 2007

We systematically investigated the effects of InAs coverage variation, two-step annealing and an asymmetric InGaAs quantum well (QW) on the structural and optical characteristics of InAs quantum dots (QDs) by using atomic force microscopy (AFM), transmission electron microscopy (TEM) and photoluminescence (PL) measurement. The transition of size distribution of InAs QDs from bimodal to multi-modal was noticeably observed with increasing InAs coverage. By means of two-step annealing, it is found that significant narrowing of the luminescence linewidth (from 132 to 31 meV) from the InAs QDs occurs together with about 150 meV blueshift, compared to as-grown InAs QDs. Finally, the InAs QDs emitting at longer wavelength of $1.3\;{\mu}m$ with narrow linewidth were grown by an asymmetric InGaAs QW. The excited-state transition for the InAs QDs with an asymmetric InGaAs QW was not noticeably observed due to the large energy-level spacing between the ground states and the first excited states. The InAs QDs with an asymmetric InGaAs QW will be promising for the device applications such as $1.3\;{\mu}m$ optical-fiber communication.

• Parasites, Hosts and Diseases
• /
• 제52권1호
• /
• pp.57-62
• /
• 2014

Biting midges (Culicoides: Ceratopogonidae) were collected by Mosquito Magnet$^{(R)}$ traps at the Neutral Nations Supervisory Commission (NNSC) camp and Daeseongdong village inside the demilitarized zone (DMZ) and near the military demarcation line (MDL) separating North and South Korea and at Warrior Base (US Army training site) and Tongilchon 3 km south of the DMZ in northern Gyeonggi Province, Republic of Korea (ROK), from May-October 2010-2012, to determine their seasonal distributions. A total of 18,647 Culicoides females (18,399; 98.7%) and males (248; 1.3%) comprising 16 species were collected. Overall, the most commonly collected species was Culicoides nipponensis (42.9%), followed by C. erairai (29.2%), C. punctatus (20.3%), C. arakawae (3.3%), C. pallidulus (1.8%), and C. circumscriptus (1.4%), while the remaining 10 species accounted for only 1.1% of all Culicoides spp. collected. The seasonal distribution of C. nipponensis was bimodal, with high numbers collected during May-June and again during September. C. erairai was more frequently collected during June-July, followed by sharply decreased populations from August-October. C. punctatus was collected in low numbers from May-September with high numbers collected during October. C. erairai was predominantly collected from the NNSC camp (85.1% of all C. erairai collected) located adjacent to the MDL at Panmunjeom in the northernmost part of Gyeonggi-do (Province), while other sites yielded low numbers of specimens.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.197-198
• /
• 2006

In the solid freeform fabrication (SFF) system using selective laser sintering (SLS), polyamide-12 powder is currently recognized as general material. In this study, some kinds of polyamide-6 powders with different shape and particlesize were fabricated to investigate the formability, the microstructure and mechanical properties. Also, to develop a more elaborate and rapid system, this study employs a new SLS device with a 3-axis dynamic focusing scanner system instead of the existing fe lens used in commercial SLS. Polyamide-6 powders having the average size of 100 m were treated thermally in order to keep the spherical symmetry in shape. These polyamide-6 powders were mixed with polyamide-12 powders having the average size of 50 m to give the bimodal distribution of size. These mixed powders showed the better fabrication in the selective laser sintering process because the smaller particles of polyamide-11 played an important role in the compact packing of powders by filling the void space between the large particles of polyamide-6. Also, Experiments have performed to evaluate the effect of a scanning path and sintering parameters by fabricating the various 3D objects.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.207-207
• /
• 2012

Si quantum dot (QD) imbedded in a $SiO_2$ matrix is a promising material for the next generation optoelectronic devices, such as solar cells and light emission diodes (LEDs). However, low conductivity of the Si quantum dot layer is a great hindrance for the performance of the Si QD-based optoelectronic devices. The effective doping of the Si QDs by semiconducting elements is one of the most important factors for the improvement of conductivity. High dielectric constant of the matrix material $SiO_2$ is an additional source of the low conductivity. Active doping of B was observed in nanometer silicon layers confined in $SiO_2$ layers by secondary ion mass spectrometry (SIMS) depth profiling analysis and confirmed by Hall effect measurements. The uniformly distributed boron atoms in the B-doped silicon layers of $[SiO_2(8nm)/B-doped\;Si(10nm)]_5$ films turned out to be segregated into the $Si/SiO_2$ interfaces and the Si bulk, forming a distinct bimodal distribution by annealing at high temperature. B atoms in the Si layers were found to preferentially substitute inactive three-fold Si atoms in the grain boundaries and then substitute the four-fold Si atoms to achieve electrically active doping. As a result, active doping of B is initiated at high doping concentrations above $1.1{\times}10^{20}atoms/cm^3$ and high active doping of $3{\times}10^{20}atoms/cm^3$ could be achieved. The active doping in ultra-thin Si layers were implemented to silicon quantum dots (QDs) to realize a Si QD solar cell. A high energy conversion efficiency of 13.4% was realized from a p-type Si QD solar cell with B concentration of $4{\times}1^{20}atoms/cm^3$. We will present the diffusion behaviors of the various dopants in silicon nanostructures and the performance of the Si quantum dot solar cell with the optimized structures.

• 청정기술
• /
• 제13권3호
• /
• pp.208-214
• /
• 2007

본 연구에서는 비수계 분산중합(NAD)을 이용하여 $0.1\;{\mu}m$에서 $1\;{\mu}m$ 크기의 입자를 가지는 환경친화적인 아크릴 수지를 제조하였다. 1 단계에서 안정제를 제조한 후 2 단계에서 안정제에 아크릴 단량체를 투입하여 NAD수지를 제조하였다. 적정 점도의 NAD수지를 합성하려면 안정제도 1000 cP 이상의 점도를 가진 것을 사용하여야 하는 것으로 나타났고 이를 위해서는 안정제 중합 시 단량체와 개시제를 단계적으로 투입하는 것이 필요한 것으로 관찰되었다. 또한 NAD수지 중합시 안정제의 양은 적정량을 투입하는 것이 필요하고 적정량 이상에서는 더 이상 NAD수지의 점도가 증가하지 않는 것으로 나타났다. 중합 단량체의 조성 선택 시에도 용해도 상수 차이 등의 요인으로 입도분포가 두 가지로 나올 수 있으므로 이를 고려하여 단량체를 투입하여야 하는 것으로 관찰되었다.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.792-796
• /
• 2015

With high integration of electronic components, power inductors are also miniaturized. Recently, thick film processes for small size power inductors were developed and commercialized. However, the thick film process to prepare soft magnetic green sheets was not reported enough. In this study, we used Fe-Si magnetic and CIP (carbonyl iron powders) as starting materials to lead to a bimodal particle size distribution in the sheet. We proposed a newly developed 'Modified slurry preparation process' to get well dispersed condition even at high solid contents. Using the new process, it was possible to prepare a well dispersed slurry over 70 vol% of solid. BYK-103 was better than BYK-111 as dispersant in this slurry and the optimum amount was 0.6 wt%. The optimized slurry was formed into a sheet by tape casting process and then the sheet was laminated. We conformed that small size powder, large size powder, and epoxy resin were well dispersed in the green sheet.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2009년도 한국우주과학회보 제18권2호
• /
• pp.30.2-30.2
• /
• 2009

There is a growing body of evidence for the presence of multiple stellar populations in some globular clusters, including NGC 1851. For most of these peculiar globular clusters, however, the evidence for the multiple red giant-branches (RGBs) having different heavy elemental abundances as observed in $\omega$ Centauri is hitherto lacking, although spreads in some lighter elements are reported. It is therefore not clear whether they also share the suggested dwarf galaxy origin of $\omega$ Cen or not. Here we show from the CTIO 4m UVI photometry of the globular cluster NGC 1851 that its RGB is clearly split into two in the U - I color. The two distinct RGB populations are also clearly separated in the abundance of heavy elements as traced by Calcium, suggesting that the type II supernovae enrichment is also responsible, in addition to the pollutions of lighter elements by intermediate mass asymptotic giant branch stars or fast-rotating massive stars. The RGB split, however, is not shown in the V - I color, as indicated by previous observations. Our stellar population models show that this and the presence of bimodal horizontal-branch distribution in NGC 1851 can be naturally reproduced if the metal-rich second generation stars are also enhanced in helium.

• Korean Chemical Engineering Research
• /
• 제55권2호
• /
• pp.163-169
• /
• 2017

$LiNi_{1-x-y}Co_xAl_yO_2$(x=0.15, y=0.045 혹은 0.05, NCA) 양극소재의 전기화학적 특성 및 양극소재의 입자 크기 분포에 대한 리튬이온이차전지의 수명특성에 대한 영향을 살피기 위해 두 종의 상업용 NCA (NCA#1, NCA#2) 양극소재를 리튬이온이차전지의양극으로사용하였다. NCA#1은약 $5m{\mu}$의 균일한구형의입자로구성되어있고 NCA#2는약 $5m{\mu}$와 $11m{\mu}$ 정도의 입자들이 혼합되어 있는 분말이다. 충방전 측정 결과 NCA#2는 초기 방전용량은 197.0 mAh/g으로 NCA#1에 비해 높게 나타났다. NCA#1과 NCA#2의 용량 유지율(30 사이클 기준)은 각각 92%와 94%로 나타났다.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.59-66
• /
• 2020

Herein, we investigated the thermal conductivity and thermal stability of natural rubber composite systems containing hybrid fillers of boron nitride (BN) and aluminum nitride (AlN). In the hybrid system, the bimodal distribution of polygonal AlN and planar BN particles provided excellent filler-packing efficiency and desired energy path for phonon transfer, resulting in high thermal conductivity of 1.29 W/mK, which could not be achieved by single filler composites. Further, polyethylene glycol (PEG) was compounded with a commonly used naphthenic oil, which substantially increased thermal conductivity to 3.51 W/mK with an excellent thermal stability due to facilitated energy transfer across the filler-filler interface. The resulting PEG-incorporated hybrid composite showed a high thermal degradation temperature (T₂) of 290℃, a low coefficient of thermal expansion of 26.4 ppm/℃, and a low thermal distortion parameter of 7.53 m/K, which is well over the naphthenic oil compound. Finally, using the Fourier's law of conduction, we suggested a modeling methodology to evaluate the cooling performance in thermal management system.

• 천문학회지
• /
• 제28권2호
• /
• pp.153-167
• /
• 1995

More than 22,300 stars in NGC 6752 were measured over the region of 5' < r < 23' in B and V AAT plates. The most of these are main sequence(MS) stars and about 130 blue horizontal branch(BHB) stars were detected. The C-M diagram of all measured stars shows gaps appearing at $V{\approx}15.^{m}2$ and $16.^{m}2$ along the red giant branch(RGB) and their appearance shown by Lee & Cannon(1980) is found to be independent of measured region. The bimodal distribution of BHB stars is confirmed again and a wide gap shown by Lee & Cannon(1980) at $V{\approx}16^m$ is clearly seen for stars in the outer part (8' < r < 13') in the cluster. It is noted, however, that this gap is occupied by about a dozen of BHB staIs located in the inner region (5' < r < 8'). The number ratio of bright BHB star (V < $15^m$) to faint BHB stars (V > $15^m$) decreases with increasing radial distance from the cluster center. Three faintest BHB stars were found, and two stars ($V{\approx}18.^{m}5$) of there are located in the inner region of $r{\approx}6'$ and the other faintest one ($V{\approx}19.^{m}3$) located in the outer part of $r{\approx}13'$. Also a bluest star of (B - V) $\approx$ -0.5 at $V{\approx}17.^{m}2$ is found but it is located at the outer part of $r{\approx}13'$ in NE region. Therefore, the membership of the faintest BHB star and bluest star is suspected. The luminosity function(LF) and mass function(MF) for NGC 6752 were derived for MS stars. The LF for stars of $M_v\;<\;6^m$ in the outer part of r > 8' shows a consistency with that derived by Penny & Dickens(1986).