• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.10-18
• /
• 2010

Controlled electrodeposition of dendritic nano-structured gold-platinum (AuPt) alloy onto an electrochemically pretreated carbon paper substrate was conducted in an attempt to improve catalyst utilization and to secure an electronic percolation network toward formic acid (FA) fuel cell application. The AuPt catalysts were obtained by potentiostatic deposition. AuPt catalysts synthesized as bimetallic alloys with 60% Au content exhibited the highest catalytic activity towards formic acid electro-oxidation. The origin of this high activity and the role of Au were evaluated, in particular, by XPS analysis. Polarization and stability measurements with 1 mg $cm^{-2}$ AuPt catalyst (only 0.4 mg $cm^{-2}$ Pt) showed 52 mW $cm^{-2}$ and sustainable performance using 3M formic acid and dry air at $40^{\circ}C$.

• 한국분말재료학회지
• /
• 제27권6호
• /
• pp.449-457
• /
• 2020

Iron and copper are practically immiscible in the equilibrium state, even though their atomic radii are similar. As non-equilibrium solid solutions, the metastable Fe-Cu alloys can be synthesized using special methods, such as rapid quenching, vapor deposition, sputtering, ion-beam mixing, and mechanical alloying. The complexity of these methods (multiple steps, low productivity, high cost, and non-eco-friendliness) is a hinderance for their industrial applications. Electrical explosion of wire (EEW) is a well-known and effective method for the synthesis of metallic and alloy nanoparticles, and fabrication using the EEW is a simple and economic process. Therefore, it can be potentially employed to circumvent this problem. In this work, we propose the synthesis of Fe-Cu nanoparticles using EEW in a suitable solution. The powder shape, size distribution, and alloying state are analyzed and discussed according to the conditions of the EEW.

• 한국분말재료학회지
• /
• 제3권4호
• /
• pp.227-232
• /
• 1996

(i) The development of a metallurgical bond during the spray forming of clad products has offered the possibility of manufacturing large rolls, including those used in hot and cold strip mills. Small rolls are already being produced in Japan. (ii) Technical developments, including the use-of-multi-atomizers have resulted in the elimination of porosity from the internal bore of a sprayed tube. Bimetallic tubing can also be manufactured and the installation of a 4.5 ton tube plant in the USA should provide low operation costs. (iii) Spray forming offers a potentially low cost manufacturing route for superalloy ring/casing components in high strength superalloys. (iv) A large pilot plant has been built for the spray forming of ultra-clean superalloys for turbine disc applications. (v) Using twin-atomizing technology, special steel billets have been spray formed up to 400mm diameter with deposition yields in excess of 90%. (vi) Al/Si alloy extrusion billets with excellent dimensional tolerances are being manufactured for large scale automotive applications. Several new aluminum alloys have also been developed, including high strength, low density and low cocfficient of expansion materials. (vii) New copper alloys have been developed and pilot plants are in operation to produce these alloys once markets have become established.

• 한국세라믹학회지
• /
• 제55권1호
• /
• pp.50-54
• /
• 2018

This study investigated the long-term durability of catalyst(Pd or Fe)-infiltrated solid oxide cells for $CO_2$/steam co-electrolysis. Fuel-electrode supported solid oxide cells with dimensions of $5{\times}5cm^2$ were fabricated, and palladium or iron was subsequently introduced via wet infiltration (as a form of PdO or FeO solution). The metallic catalysts were employed in the fuel-electrode to promote $CO_2$ reduction via reverse water gas shift reactions. The metal-precursor particles were well-dispersed on the fuel-electrode substrate, which formed a bimetallic alloy with Ni embedded on the substrate during high-temperature reduction processes. These planar cells were tested using a mixture of $H_2O$ and $CO_2$ to measure the electrochemical and gas-production stabilities during 350 h of co-electrolysis operations. The results confirmed that compared to the Fe-infiltrated cell, the Pd-infiltrated cell had higher stabilities for both electrochemical reactions and gas-production given its resistance to carbon deposition.

• Korean Chemical Engineering Research
• /
• 제55권2호
• /
• pp.270-274
• /
• 2017

본 연구에서는 양자 역학 계산 이론 중 하나인 Density Functional Theory (DFT)를 사용하여 $Pd/Pd_3Fe$ 촉매 표면에서 개미산(HCOOH) 분해 반응으로부터 수소를 생산하는 반응 메커니즘을 분석하였다. 기존 연구에 따르면, 단일 원자 촉매 중에서 개미산 분해 반응에 가장 높은 수소 생산성을 기록하는 원자는 Pd 촉매이지만, 부 반응으로 생산되는 CO가 Pd에 독성을 띄우기 때문에 Pd 촉매의 성능을 저하시킨다. 이러한 단점을 극복하고자, Pd를 기반으로 Pd와 Fe를 3:1로 합금하여 $Pd_3Fe$가 코어(core) 형태로 존재하고 Pd가 표면에 위치한 core-shell $Pd/Pd_3Fe$ 촉매를 설계하여 개미산 분해 반응에 의한 수소 생산 속도를 계산하였다. 순수 Pd촉매 보다 $Pd/Pd_3Fe$ 촉매의 수소 생산 반응의 활성 에너지가 감소하였다. 그 이유는 Pd와 Fe가 합금화 되면서 $Pd_3Fe$의 격자 상수가 $2.76{\AA}$로 줄어 들어 HCOO의 흡착에너지를 0.03 eV 감소시켰고, Fe에서 표면 Pd로 전자가 이동하면서 표면 전자 구조가 변화하여 HCOO의 흡착에너지를 0.29 eV 낮추었기 때문이다. 본 연구에서 제안하는 결과를 바탕으로 추후 개미산으로부터 수소 생산이 더 용이한 새로운 촉매 설계 메커니즘을 제안하고자 한다.