• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.387-390
• /
• 2001

Thermopile thermometer can measure the temperature of an object without attaching the object. It measures the temperature by receiving the radiation energy from objects. The idea of this is from the law of Stefan-Boltzmann. In the past it was not used well because the size was big and the cost was too expensive. But, In these days it can be used many field because the size become smaller and advantage of cost by using micro machine technology. However, The accuracy of measuring is not better than electric type. So we want to improve the accuracy of sensor by analyzing the heat transfer of the thermopile. To analyze temperature distribution in the thermopile sensor, we use the FEM software which is named ANSYS. The conduction and radiation heat transfer is considered to simulate the temperature distribution and time response inside of the sensor.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.62-65
• /
• 2000

For saving time and cost of experiment Finite Element Method has been developed for several decades. It's the defect of FEM that when we are in processing of finite element analysis, the material if deformed so much that we can't proceed analysis any more. In this case, the remeshing process should be done on this material. In hot forging process, almost all remeshing process does not consider flash of the material. Because as mesh size become swatter, consuming time become larger. But if mesh size is big, there is the defect that the result of analysis is not so accurate. So, new remeshing algorithm is needed to save time and to get more accurate result.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1663-1666
• /
• 2003

TMA clathrate that is used by PCM of ice storage system in this research creates hydrate crystallization at higher temperature than pure water, and application is expected as PCM because having comparative big dormant temperature without phase separation phenomenon. In case this research uses TMA clathrate by PCM, choose admixture by purpose to control or remove subcooling of TMA clathrate and evaluated experimentally. Subcooling is improved and can expect contraction of freezing machine running time and increase of coefficient of performance as that add admixture to TMA clathrate conclusively. Also, may supply thermal storage system that apply low temperature potential heat thermal storage material that subcooling is improved more extensively laying stress on medium size building and small size building, can expect allowance through localization of ice storage system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.3
• /
• pp.305-312
• /
• 2014

This research deals with a problem that minimizes makespan in a non-identical parallel machine system with sequence and machine dependent setup times and machine dependent processing times. We first present a new mixed integer programming formulation for the problem, and using this formulation, one can easily find optimal solutions for small problems. However, since the problem is NP-hard and the size of a real problem is large, we propose four heuristic algorithms including genetic algorithm based heuristics to solve the practical big-size problems in a reasonable computational time. To assess the performance of the algorithms, we conduct a computational experiment, from which we found the heuristic algorithms show different performances as the problem characteristics are changed and the simple heuristics show better performances than genetic algorithm based heuristics for the case when the numbers of jobs and/or machines are large.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.1 no.3
• /
• pp.1-6
• /
• 2004

In the last few years, a considerable number of studies have been made on On-Off solenoid for fluid control. But, only few attempts have so far been made at solenoid actuator for high-voltage circuit breaker. In case of the high-pressure and high-flow system like high-voltage circuit breaker, a big size of On/Off solenoid is necessary which size is proportional to control pressure and flow rate. So, it is non-effective in the view point of system optimization. In this paper, On/Off solenoid actuator with the farce amplifier connected to the solenoid rod was proposed to get a high mechanical force and a fast response time. The magnetic force and the mechanical stress distributions were analysed using finite element analysis. The performances of suggested solenoid actuator were evaluated through the experimental results and compared with the analysis results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.484-484
• /
• 2000

The problem of determining the proper size of an neural network is recognized to be crucial, especially for its practical implications in such important issues as learning and generalization. Unfortunately, it usually is not obvious what size is best: a system that is too snail will not be able to learn the data while one that is just big enough may learn the slowly and be very sensitive to initial conditions and learning parameters. One popular technique is commonly known as pruning and consists of training a larger than necessary network and then removing unnecessary weights/nodes. In this paper, a new pruning method is developed, based on the penalty-term methods. This method makes the neural network good for the generalization and reduces the retraining time after pruning weights/nodes.

• Transactions of Materials Processing
• /
• v.13 no.2
• /
• pp.115-121
• /
• 2004

Hemming is the last farming process in stamping and determines external quality of automotive outer panels. Few numerical approaches using 3-dimensional finite element model have been applied to a hemming process due to small element size which is needed to express the bending behavior of the sheet around small die comer and comparatively big model size of automotive opening parts, such as side door, back door and trunk lid etc In this study, part model assembling method is suggested and applied to the 3-dimensional finite element simulation of flanging and hemming process far an automotive front hood.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.171-172
• /
• 2006

Most existing studies for stress analysis of teeth have employed small number of teeth, and used big element size using F-E models. Therefore, the results are not accuracy enough for showing the internal stress variation. 15 males' and 13 females' mandibular first premolar are employed for internal structure's study of teeth and small element size for a FE model are used. According to these processes, stress distribution of internal parts of teeth are well shown, and the stresses are varied a lot between enamel layer and dentine layer, but there is little variation on pulp chamber.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.103-107
• /
• 2002

The 2nd forming process of flanging/hemming has recently many interest because it determines external quality of automobile. It is difficult to apply finite element simulation in flanging/hemming due to small element size which needs for expression of bending effect on the die corner and big model size of side door, back door, tank lid and like opening Parts. This paper shows the process of flanging/hemming simulation using finite element model for automotive panels. The explicit finite element program PAM-STAMP$\^$TM/ was used to simulate the flanging and hemming operations.

• Korean Journal of Agricultural Science
• /
• v.35 no.2
• /
• pp.237-245
• /
• 2008

China's agriculture is changing now, especially in terms of cash farming. Orange farming is one of the main cash crops. This study is to identify the labor utilization of orange farming of farm households in China. The Results are as follows. First, farm size increasing is an essential measure to save labor. Big farm requires less than 20% of labor inputs than that of average size farm. Second, in the aspect of the employment labor, while male labor accounted for the 5% of total labor, female employment labor took up much more, which amounts to almost half of family labor. Third, the average wage of men is almost twice as much as that of women's wage, and it is sharply increasing. Fourth, Chinese farm households put more labor input than Korean farm households in orange production, which is due to the substitution of capital for labor.