• Journal of the Korean Society of Safety
• /
• v.13 no.2
• /
• pp.104-108
• /
• 1998

In order to evaluate the performances of safety valves for low pressure, the popping pressure and flow rate of the natural gas have been investigated. The measured results of the popping pressure show that there is a big scattering depending on the manufacture year of a safety valve. And sample A showed the ideal popping pressure mode compared to other B and C samples. The popping flow rate of the safety valve is proportional to the seat size as the inlet pressure increases. These results may be used as a guideline for a design and diagnosis of the safety valve.

• The Journal of the Korean dental association
• /
• v.12 no.10
• /
• pp.747-751
• /
• 1974

The authors had a case of large periodontal cyst treated by Apicoectomies in 32 year old, Korean female. 1. A large periodontal cyst revealed big size in Maxilla, left side. 2. The authors have treated the periodontal cyst by means of the apicoectomies of the involved left lateral incisor, canine, 1st premolar and 2nd premolar teeth, maxilla. 3. Radiographic examination revealed a large radiolucent lesion 2.7 3.7cm in diameter, in the midline area, with involvement of the lateral incisor, canine, 1st premolar and 2nd premolar teeth, maxilla.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.39-41
• /
• 2008

It is generally acknowledged that with the advent of digital technology we are faced with the revolutionary era in which everyone can enjoy the virtual reality with the simple motion of his or her fingertips. Specifically, this new trend enables domestic game industries to make a big takeoff in their size and capital accumulation. Considering this phenomenon, this project is designed to suggest an ideal space equipment or placement required to various forms of game industries.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.867-876
• /
• 1987

Corrosion fatigue fracture with change in the grain size of M.E.F. dual phase steel is investigated in 3.5% NaCI aqueous solution at pH 2, 4, 6, 9, and 11. Generally speaking, decrease in corrosion fatigue life is strongly dependent on decrease in pH and slightly on the grain size. For the B material with the big grain size, the fatigue life is small due to its large reduction ratio of corrosion fatigue life. The influence of grain size on the reduction ratio of corrosion fatigue life is large at pH 11-6. Whi9le at pH 4-2 the reduction ratio of corrosion fatigue life only depends on the corrosion effect. The larger grain size and the lass pH result in the greater influence on corrosion fatigue crack propagation rate. As pH decreases, the plateau portion in the crack propagation rate curves of the B material are distinct. Crack propagation rate curves become slow down at high .DELTA.K range because crack closure effect by minute corrosion products inside crack causes the oxidation corrosion action less effective for a certain period of time. In A material with small grain size, fatigue life is increased in proportion with increase of martensite intergranular which brings forth restraining the crack propagation decreases crack propagation rate. Corrosion pit which is created in the surface of specimen is found at pH 6,4 and 2 which is noticeable and the unevenness of the surface of the specimen becomes severe as pH decreases. The unevenness of corrosion fatigue fracture surface is severe as the effect of pH increases i.e. as pH decreases. In proportion with increase in the grain size and decrease in pH, the aspect of brittle fracture becomes evident.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.1
• /
• pp.182-195
• /
• 2011

Old big tree transcends the simple meaning of trees as they are the natural monuments that embody the people's history and culture of this land. The Cultural Heritage Administration of Korea (CHA) defines and protects old big tree based not only on the size of the tree but also on its definitive cultural and natural factors such as value, implications, and originality. This research aims to identify and analyze the habitation and measurements, the soil conditions, as well as the protective facilities of 14 old big tree spread throughout the Gangwondo. The research examined the soundness of the arboreal form, the degree of damage on the bark, as well as the quantity of leafs levels to evaluate the overall condition of growth and development. Then, the tree height, the eastwest and south-north width of the crown, the sternum circumference, and the root circumference were recorded to identify the measurements of the selected old big tree. Also, the research analyzed 9 elements such as soil texture, pH levels, and organic contents in order to determine the scientific characteristics of soil upon which the trees draw nutrition. Finally, the research evaluated supporting pillars, lightning rods, iron pulling-facilities, as well as notice boards to study the protective facilities of old big tree. The research procedures revealed that 78.57% of the old big tree identified as natural monuments in the Gangwondo have average to above average habitation conditions. Also, the average tree height reaches 18.80m above ground while the average root circumference measures 7.34m. Moreover, the results of the scientific analyses conducted on the soil elements determined that most chemical values were within the defined levels, with the exception of phosphoric acid levels falling within the hyper-nutritious range. Finally, although most of the protective facilities did support the habitation of the Old big tree, there were some supporting pillars and iron pulling-facilities that actually damaged the trees. This research means to provide foundational reference data for the analysis of the habitation and management conditions of natural monument old big tree within the Gangwondo. A follow-up topic led by the results of this research is the identification and analysis of correlating environmental elements that affect the habitation of the old big tree.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.4
• /
• pp.9-16
• /
• 1974

The low channels with frequency range of 54~88MHz and the high channels with frequency range if 174~216 MHz are in use for TV broadcasting in Korea. Since the ratio of the highest frequency to the lowest frequency is 4 to 1, only a logarithmic periodic antenna cou1d cover such an wide frequency range. But, this log-periodic antenna should be big in size. Studies have been done on an antenna of small size with reasonable gain which combines through a channel filter a LPD antenna if low channel with boom length of 2m and a LPD antenna of high channel with boom length of 1.8m. The whole antenna is connected to feeder line through a talun. Experiment shows that the gain of low and high channels is 7 dB and 9 dB respectively, which are lower than theoretical values br nomore than ldB. The difference seemed to come from slight impedance mismatches between antennas and feeder lines, loss in the filter and measurement errors.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.30-35
• /
• 2002

Nowadays, as the development period of new products becomes shorter and consumer's requirement is more various, the importance of Rapid Prototyping Technology has been rapidly increased. Rapid Prototyping makes prototypes or frictional parts directly using the 3D CAD data. But RP machines can make prototypes in limit size. For making large size prototype, we slice solid which is made of STL file, and then glue sliced solid. And if contact area of part is small, union solid will be easily destroyed for going down of adhesion. So we need to expand contact area, 1 suggest making a section into stair shape. This paper is concerned with slicing solid on STL file and improving on adhesion.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.171-177
• /
• 2002

In this paper, we propose a new data fusion method to improve the performance of individual prediction models for time series data. Individual models used are ARIMA and neural network and their results are combined based on the weight reflecting the inverse of EWMA of squared prediction error of each individual model. Monte Carlo simulation is used to identify the situation where the proposed approach can take a vintage point over typical fusion methods which utilize MSE for weight. Study results indicate the following: EWMA performs better than MSE fusion when the data size is large with a relatively big amplitude, which is often observed in intra-cranial pressure data. Additionally, EWMA turns out to be a best choice among MSE fusion and the two individual prediction models when the data size is large with relatively small random noises, often appearing in tax revenue data.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1009_1010
• /
• 2009

This paper presents a power supply system with pre-regulator using zero voltage switching (ZVS) interleaving two-transistor forward converter for high input voltage and high power application. A SMPS has a advantage that a good efficiency, small size and light weight but has a noise problem. A linear power supply system has a advantage that a good stability, low ripple and noise but has a disadvantage that a big size, low efficiency and heat problem. To alleviate these problems, we propose an power supply system using dual ZVS interleaving two-transistor forward pre-regulator. The proposed converter is verified on a 1kW, 50kHz experimental prototype.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.63-72
• /
• 2020

Objective: The purpose of this study was to investigate meta-analysis on the effects of exercise therapy and physiotherapy on pain in korean patients with chronic low back pain. Method: Meta-analysis was performed on the type and method of treatment. A total of 23 experimental studies were coding into 31 individual studies, into types, methods, visual analogue scale (VAS), each pre/post value of the effect size was calculated by meta-analysis. Results: Sling exercise, stretching, thermal therapy, kinesio-taping, lumbar stabilization exercise, electrotherapy is large effect size (ES ≥ .08). In addition, big effects occurred in order of treatment period is more than 9 weeks, three times a week. Conclusion: Our results indicated that persistent treatment of chronic back pain is the most effective method of self-sufficiency rather than temporary relief.