• 제목/요약/키워드: Biases

검색결과 588건 처리시간 0.029초

$0.13{\mu}m$ CMOS Quadrature VCO for X-band Application ($0.13{\mu}m$ CMOS 공정을 이용한 X-band용 직교 신호 발생 전압제어 발진기)

  • Park, Myung-Chul;Jung, Seung-Hwan;Eo, Yun-Seong
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • 제49권8호
    • /
    • pp.41-46
    • /
    • 2012
  • A quadrature voltage controlled oscillator(QVCO) for X-band is presented in this paper. The QVCO has fabricated in Charted $0.13{\mu}m$ CMOS process. The QVCO consists of two cross-coupled differential VCO and two differential buffers. The QVCO is controlled by 4 bit of capacitor bank and control voltage of varactor. To have a linear quality factor of varactors, voltage biases of varactors are difference. The QVCO generates frequency tuning range from 6.591 GHz to 8.012 GHz. The phase noise is -101.04 dBc/Hz at 1MHz Offset when output frequency is 7.150 GHz. The supply voltage is 1.5 V and core current 6.5-8.5 mA.

Effects of Temperature Stress on VFB Shifts of HfO2-SiO2 Double Gate Dielectrics Devices

  • Lee, Kyung-Su;Kim, Sang-Sub;Choi, Byoung-Deog
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.340-341
    • /
    • 2012
  • In this work, we investigated the effects of temperature stress on flatband voltage (VFB) shifts of HfO2-SiO2 double gate dielectrics devices. Fig. 1 shows a high frequency C-V of the device when a positive bias for 10 min and a subsequent negative bias for 10 min were applied at room temperature (300 K). Fig. 2 shows the corresponding plot when the same positive and negative biases were applied at a higher temperature (473.15 K). These measurements are based on the BTS (bias temperature stress) about mobile charge in the gate oxides. These results indicate that the positive bias stress makes no difference, whereas the negative bias stress produces a significant difference; that is, the VFB value increased from ${\Delta}0.51$ V (300 K, Fig. 1) to ${\Delta}14.45$ V (473.15 K, Fig. 2). To explain these differences, we propose a mechanism on the basis of oxygen vacancy in HfO2. It is well-known that the oxygen vacancy in the p-type MOS-Cap is located within 1 eV below the bottom of the HfO2 conduction band (Fig. 3). In addition, this oxygen vacancy can easily trap the electron. When heated at 473.15 K, the electron is excited to a higher energy level from the original level (Fig. 4). As a result, the electron has sufficient energy to readily cross over the oxide barrier. The probability of trap about oxygen vacancy becomes very higher at 473.15 K, and therefore the VFB shift value becomes considerably larger.

  • PDF

A Converging Approach on Investment Strategies, Past Financial Information, and Investors' Behavioral Bias in the Korean Stock Market (주식투자 전략, 과거 재무정보, 투자자의 행태편향에 대한 융합적 연구)

  • Koh, Seunghee
    • Journal of the Korea Convergence Society
    • /
    • 제7권6호
    • /
    • pp.205-212
    • /
    • 2016
  • This study attempts to empirically investigate if value strategy and momentum strategy could be improved by using past financial data such as ROE and PER in the Korean stock market. The study observes that both strategies which are refined by the portfolios consisting of companies with higher ROE/PER ratio show higher positive excessive returns than the traditional value strategy and momentum strategy. The study discusses that the excessive returns could be due to investors' behavioral biases such as conservatism, anchoring, confirmation, and herding by using convergent approach based on psychology theory. The results are not consistent with the efficient market hypothesis insisting investors' rational behavior.

Statistical estimation of crop yields for the Midwestern United States using satellite images, climate datasets, and soil property maps

  • Kim, Nari;Cho, Jaeil;Hong, Sungwook;Ha, Kyung-Ja;Shibasaki, Ryosuke;Lee, Yang-Won
    • Korean Journal of Remote Sensing
    • /
    • 제32권4호
    • /
    • pp.383-401
    • /
    • 2016
  • In this paper, we described the statistical modeling of crop yields using satellite images, climatic datasets, soil property maps, and fertilizer data for the Midwestern United States during 2001-2012. Satellite images were obtained from the Moderate Resolution Imaging Spectroradiometer (MODIS), and climatic datasets were provided by the Parameter-elevation Regressions on Independent Slopes Model (PRISM) Climate Group. Soil property maps were derived from the Harmonized World Soil Database (HWSD). Our multivariate regression models produced quite good prediction accuracies, with differences of approximately 8-15% from the governmental statistics of corn and soybean yields. The unfavorable conditions of climate and vegetation in 2012 could have resulted in a decrease in yields according to the regression models, but the actual yields were greater than predicted. It can be interpreted that factors other than climate, vegetation, soil, and fertilizer may be involved in the negative biases. Also, we found that soybean yield was more affected by minimum temperature conditions while corn yield was more associated with photosynthetic activities. These two crops can have different potential impacts regarding climate change, and it is important to quantify the degree of the crop sensitivities to climatic variations to help adaptation by humans. Considering the yield decreases during the drought event, we can assume that climatic effect may be stronger than human adaptive capacity. Thus, further studies are demanded particularly by enhancing the data regarding human activities such as tillage, fertilization, irrigation, and comprehensive agricultural technologies.

Development of Korean Gender Role Identity Inventory (한국인의 성역할 정체감 검사 도구 개발)

  • 이병숙;김명애;고효정
    • Journal of Korean Academy of Nursing
    • /
    • 제32권3호
    • /
    • pp.373-383
    • /
    • 2002
  • This study was performed to develope a scale of gender role identity in Korean adults based on the Bem's theory of androgyny. Although there were several tools in Korea, they were revealed having some problems of cultural differences, translation biases, and methodological problems. Methods: A list of 78 items were developed using the existing tools and descriptions from 5 married couples. The items were the typical personality characteristics which were manifested by gender, male or female. And the list contained several items which were the socially desirable personality characteristics. which would be simply used as contextual items. Validity of the 78 items were screened by 18 expert panels with 4 point Likert scale, and 57 items were judged as highly valid from 70% of the experts, which were selected as preliminary items for the tool. Using the preliminary tool which was developed as a 4 point Likert scale, data were collected from 1,127 subjects for item analysis and factor analysis. 53 items were remained, because 4 items whose item-total correlation were lower than 0.2 were excluded by the result of item analysis. Factor analysis was done with the 53 items, and 49 items whose factor loadings were same and higher than 0.4 were remained. 3 factors were identified with eigen value 2.0, and these factors were named as masculinity, femininity, and social desirability. Results and Conclusion: KGRII(Korean Gender Role Identity Inventory) which contained 45 items was developed, with 15 items for 3 factors. The reliability of the tool was very high. Cronbach alpha of the tool was 0.929, and alpha of the subscales were ranged from 0.841 to 0.922.

Efficiency Enhancement for the 3.5 GHz Balanced Power Amplifier Using Dynamic Bias Switching (Dynamic Bias Switching을 이용한 3.5 GHz Balanced Power Amplifier의 효율 개선)

  • Seo, Min-Cheol;Kim, Kyung-Won;Kim, Min-Su;Kim, Hyung-Chul;Jeon, Jeong-Bae;Yang, Youn-Goo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • 제21권8호
    • /
    • pp.851-856
    • /
    • 2010
  • This paper presents an efficiency enhancement for the balanced power amplifier using DBS(Dynamic Bias Switching) method which dynamically provides the power amplifier with two bias voltage levels according to the input envelope signal. In order to apply the dynamic biases to each side of the balanced power amplifier, two switching stages are adopted. Using an OFDM signal with a bandwidth of 20 MHz and a PAR(Peak to Average Ratio) of 8.5 dB, 6 % of PAE(Power-Added Efficiency) is improved at an output power of 42.5 dBm.

Precision Evaluation of Recent Global Geopotential Models based on GNSS/Leveling Data on Unified Control Points

  • Lee, Jisun;Kwon, Jay Hyoun
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • 제38권2호
    • /
    • pp.153-163
    • /
    • 2020
  • After launching the GOCE (Gravity Field and Steady-State Ocean Circulation Explorer) which obtains high-frequency gravity signal using a gravity gradiometer, many research institutes are concentrating on the development of GGM (Global Geopotential Model) based on GOCE data and evaluating its precision. The precision of some GGMs was also evaluated in Korea. However, some studies dealt with GGMs constructed based on initial GOCE data or others applied a part of GNSS (Global Navigation Satellite System) / Leveling data on UCPs (Unified Control Points) for the precision evaluation. Now, GGMs which have a higher degree than EGM2008 (Earth Gravitational Model 2008) are available and UCPs were fully established at the end of 2019. Thus, EIGEN-6C4 (European Improved Gravity Field of the Earth by New techniques - 6C4), GECO (GOCE and EGM2008 Combined model), XGM2016 (Experimental Gravity Field Model 2016), SGG-UGM-1, XGM2019e_2159 were collected with EGM2008, and their precisions were assessed based on the GNSS/Leveling data on UCPs. Among GGMs, it was found that XGM2019e_2159 showed the minimum difference compared to a total of 5,313 points of GNSS/Leveling data. It is about a 1.5cm and 0.6cm level of improvement compare to EGM2008 and EIGEN-6C4. Especially, the local biases in the northern part of Gyeonggi-do, Jeju island shown in the EGM2008 was removed, so that both mean and standard deviation of the difference of XGM2019e_2159 to the GNSS/Leveling are homogeneous regardless of region (mountainous or plain area). NGA (National Geospatial-Intelligence Agency) is currently in progress in developing EGM2020 and XGM2019e_2159 is the experimentally published model of EGM2020. Therefore, it is expected that the improved GGM will be available shortly so that it is necessary to verify the precision of new GGMs consistently.

Potential Biases Arising in the Use of Cascade Impactors to Estimate Respiratory Tract Deposition Patterns of Lead-Acid Battery Plant Aerosols

  • Hodgkins Douglas G.;Robins Thomas G.;Hinkamp David L.;Levine Steven P.;Schork M. Anthony;Krebs William H.
    • 대한예방의학회:학술대회논문집
    • /
    • 대한예방의학회 1994년도 교수 연수회(환경)
    • /
    • pp.585-595
    • /
    • 1994
  • The region of the respiratory tract where inhaled particles deposit can have important implications for the causation of local or systemic toxic effects. For most aerosols of occupational importance, respiratory tract deposition can be predicted from the aerodynamic diameter of the particles. With the advent of cascade impactors, particularly those of personal sampler size, the determination of the aerodynamic diameters of aerosols has become more common. Some limitations of cascade impactor use are well recognized (e.g., particle bounce and substrate overloading) and are generally correctable. However, two important limitations of the instruments may not be receiving adequate attention: relative humidity effects on potentially hygroscopic aerosols and the collection characteristics of fibrous aerosols as compared to their actual deposition site potential. The results of this study, when compared to results of previous controlled laboratory trials, suggest that, while potentially hygroscopic lead aerosols from lead acid battery plant operations do not appear to be affected by changes in plant environmental humidity levels, the potential - exists for significant size changes upon inhalation. Secondly, fibers were detected in aerodynamic size ranges that would be associated with deep lung deposition; however, upon microscopic examination, these same fibers would actually be predicted to deposit in the upper airways. This study suggests that the physicalchemical properties and morphological features of an aerosol should be carefully considered by industrial hygienists before cascade impactors are used in attempts to predict the effects of inhaled aerosols.

  • PDF

Improvements to the Terrestrial Hydrologic Scheme in a Soil-Vegetation-Atmosphere Transfer Model (토양-식생-대기 이송모형내의 육지수문모의 개선)

  • Choi, Hyun-Il;Jee, Hong-Kee;Kim, Eung-Seok
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 한국수자원학회 2009년도 학술발표회 초록집
    • /
    • pp.529-534
    • /
    • 2009
  • Climate models, both global and regional, have increased in sophistication and are being run at increasingly higher resolutions. The Land Surface Models (LSMs) coupled to these climate models have evolved from simple bucket models to sophisticated Soil-Vegetation-Atmosphere Transfer (SVAT) schemes needed to support complex linkages and processes. However, some underpinnings of terrestrial hydrologic parameterizations so crucial in the predictions of surface water and energy fluxes cause model errors that often manifest as non-linear drifts in the dynamic response of land surface processes. This requires the improved parameterizations of key processes for the terrestrial hydrologic scheme to improve the model predictability in surface water and energy fluxes. The Common Land Model (CLM), one of state-of-the-art LSMs, is the land component of the Community Climate System Model (CCSM). However, CLM also has energy and water biases resulting from deficiencies in some parameterizations related to hydrological processes. This research presents the implementation of a selected set of parameterizations and their effects on the runoff prediction. The modifications consist of new parameterizations for soil hydraulic conductivity, water table depth, frozen soil, soil water availability, and topographically controlled baseflow. The results from a set of offline simulations are compared with observed data to assess the performance of the new model. It is expected that the advanced terrestrial hydrologic scheme coupled to the current CLM can improve model predictability for better prediction of runoff that has a large impact on the surface water and energy balance crucial to climate variability and change studies.

  • PDF

The Effectiveness of Virtual R&D Teams in SMEs: Experiences of Malaysian SMEs

  • Ale Ebrahim, Nader;Abdul Rashid, Salwa Hanim;Ahmed, Shamsuddin;Taha, Zahari
    • Industrial Engineering and Management Systems
    • /
    • 제10권2호
    • /
    • pp.109-114
    • /
    • 2011
  • The number of small and medium enterprises (SMEs), especially those involved with research and development (R&D) programs and employed virtual teams to create the greatest competitive advantage from limited labor are increasing. Global and localized virtual R&D teams are believed to have high potential for the growth of SMEs. Due to the fast-growing complexity of new products coupled with new emerging opportunities of virtual teams, a collaborative approach is believed to be the future trend. This research explores the effectiveness of virtuality in SMEs' virtual R&D teams. Online questionnaires were emailed to Malaysian manufacturing SMEs and 74 usable questionnaires were received, representing a 20.8 percent return rate. In order to avoid biases which may result from pre-suggested answers, a series of open-ended questions were retrieved from the experts. This study was focused on analyzing an open-ended question, whereby four main themes were extracted from the experts' recommendations regarding the effectiveness of virtual teams for the growth and performance of SMEs. The findings of this study would be useful to product design managers of SMEs in order to realize the key advantages and significance of virtual R&D teams during the new product development (NPD) process. This is turn, leads to increased effectiveness in new product development's procedure.