• 제목/요약/키워드: BiTe

검색결과 310건 처리시간 0.029초

울산 광산의 철-텅그스텐 스카른화작용 (Magnetite and Scheelite-Bearing Skarns in Ulsan Mine, Korea)

  • 최선규;이마이 나오야
    • 자원환경지질
    • /
    • 제26권1호
    • /
    • pp.41-54
    • /
    • 1993
  • 경상분지 남동부에 위치한 울산광산은 석회암을 교대한 전형적인 calcareous skarn강상으로 Fe W광화작용 이외에도 Cu, Pb, Zn, As, Bi, Ni, Co, Cr, Ag, Sn, In, Te, Sb 등이 수반되는 다금속광화작용의 특성을 보여주고 있다. 본 광상은 직립에 가까운 파이프상 광체로 산출되며, 자철석과 함께 북측의 혼펠스와의 경계부근에 회중석이 부분적으로 광염되어 있다. 본 광상의 스카른대는 석회암 및 혼펠스를 교대한 괴상 스카른과 양자를 각기 절단하는 맥상스카른으로 구분된다. 괴상스카른은 석회암 기원의 스카른이 주체를 이루며, 이러한 스카른대는 규회석 스카른, 석류석 스카른, 단사휘석-석류석 스카른, 단사휘석 스카른으로 분류되며, 부분적으로 스카른대 주변부를 따라 거정질 방해석대가 존재하고 있다. 스카른 진화과정은 초기스카른 및 후기스카른의 두 시기로 분류되며, 초기스카른은 prograde한 스카른 생성시기로 초기에는 규회석, Mg-rich 단사휘석, Al-rich garnet가 주로 정출되며 광석광물은 거의 불모한 시기이나, 초기스카른의 말기로 진행됨에 따라 자철석과 회중석이 정출된다. 그리고, 후기스카른의 전반기까지는 Fe-rich 단사휘석, Fe-rich garnet와 함께 자철석 회중석이 연속적으로 정출되었으나, 후기스카른의 중기부터는 Ni, Co, As, Cu, Zn, Fe, Bi 등의 황화광물이 정출되는 다금속광화 작용의 특정을 보인다. 또한, 최후기 열수작용시기에는 섬아연석과 방연석 등의 Base-metal 황화광물이 주로 정출되는 연 아연 광화작용의 양상을 나타낸다. 이러한 각 광화시기별 스카른 광물과 광석광물의 변화양상은 고온의 열수용액이 천부로 유출되는 과정에서 광화용액의 온도가 급격히 떨어진 결과 (telescope)에 기인된 것으로 사료된다.

  • PDF

Bi-Sr-Ca-Cu-O계열 초전도체의 초구조 (SUPERSTRUCTURES OF Bi-Sr-Ca-Cu-O SUPERCONDUTORS)

  • 남궁찬;이상윤
    • 한국재료학회지
    • /
    • 제4권3호
    • /
    • pp.268-279
    • /
    • 1994
  • 단일상을 갖는 $Bi_2S_2CaCu_2O_{8+x}$ (2212)의 x-ray 분말 pattern을 a=5.408, c=30.83 $\AA$의 격자상수 및 역격자 벡터 $q^*=0.211b^*-c^*$을 갖는 pseudo tetragonal subcell을 이용하여 모두 index하였다. 임계온도 110K를 갖는 $Bi_2S_2CaCu_2O_{10+x}$ 상은 incommensurate supercell에 속하는 매우 많은 x-ray분말선들을 가지고 있다. Indixing guide로 전자회절사진(electron diffraction photographs)을 이용 x-ray분말 pattern에 대한 지수결정방법을 얻었다.$Bi_2S_2CaCu_2O_{10+x}$(2223)의 단위세표(unit cell)는 기하학적으로 격자상수 a=5.411, b=5.420, c=37.29(2) A을 갖는 orthorhombic subcell이다. Supercell반사 지수들은 subcell의 파 벡터 $\pm q^*=0.211b^*-0.78c^*$을 갖는 k,1지수로부터 영향을 받은 것이다. b 방향으로의 inconnensurate성분 $\delta$는 두 상에 대해 다 같으나, 2212에서 2223 상으로의 변환에 따라 c 방향으로의 초격자성분(superlattic component)은 connensurate($\varepsilon$=1)로부터 incommensurate($\varepsilon$=0.78)로 변한다.

  • PDF

Computational Simulations of Thermoelectric Transport Properties

  • Ryu, Byungki;Oh, Min-Wook
    • 한국세라믹학회지
    • /
    • 제53권3호
    • /
    • pp.273-281
    • /
    • 2016
  • This review examines computational simulations of thermoelectric properties, such as electrical conductivity, Seebeck coefficient, and thermal conductivity. With increasing computing power and the development of several efficient simulation codes for electronic structure and transport properties calculations, we can evaluate all the thermoelectric properties within the first-principles calculations with the relaxation time approximation. This review presents the basic principles of electrical and thermal transport equations and how they evaluate properties from the first-principles calculations. As a model case, this review presents results on $Bi_2Te_3$ and Si. Even though there is still an unsolved parameter such as the relaxation time, the effectiveness of the computational simulations on the transport properties will provide much help to experimental scientist researching novel thermoelectric materials.

열전반도체를 이용한 냉장고의 개발 (The Development of Refrigerator Using the Thermoelectric semiconductor)

  • 정용호;이우선;서용진;김상용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
    • /
    • pp.50-53
    • /
    • 2001
  • The thermoelectric refrigeration technologies have no moving parts. compressor, or piping required. In this study, the basic capacity of thermoelectric devices and development on some thermoelectric refrigerator were reviewed and basic technical concepts related with many kinds of thermoelectric materials were discussed. Especially the result of performance test on thermoelectric refrigerator whose minimum temperature of $-2^{\circ}C$ was introduced briefly.

  • PDF

열전 모듈의 접합강도에 미치는 Ni 도금 및 표면 거칠기의 영향 (Effect of Ni plating and surface roughness on the bonding strength of thermoelectric module)

  • 김성순;고병만;손인준;박관호;조상흠
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2015년도 추계학술대회 논문집
    • /
    • pp.347-348
    • /
    • 2015
  • Ni 도금 및 표면 거칠기에 따른 열전모듈의 접합강도 특성을 알아보기 위해 Bi-Te 소재 위에 Sand-blasting 방법을 사용하여 표면 거칠기를 조절하고, Ni-P 무전해 도금을 수행하였다. 접합강도 측정 및 표면 성분을 분석하기 위해 전단응력 측정기, FE-SEM을 이용하였다. Sand-blasting과 Ni 도금을 실시한 시편이 sand-blasting과 도금을 미실시한 대조군보다 전단응력이 높았고, 큰 방 수의 sand로 sand-blasting 한 시편일수록 전단응력이 더 높은 경향성을 보였다.

  • PDF

Nano-scale Observation of Nanomaterials and Nano-devices

  • 안치원
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2012년도 춘계학술발표대회
    • /
    • pp.86.1-86.1
    • /
    • 2012
  • 나노재료와 나노기술의 연구개발 지원을 위하여 국가나노인프라인 나노종합팹센터에서 개발되고 있는 나노재료/나노현상의 실시간 관찰을 위한 SiN membrane chip 기술 및 나노그래핀 기반구축에 대한 최근 결과와 향후계획을 소개하고자 한다. 나노재료의 합성, 배열, 구조 등의 실시간 관찰을 가능하게 하기 위하여 제작된SiN membrane chip은 투과전자현미경(transmission electron microscope, TEM)에서 투명한 기판으로, 그 위에 나노재료를 합성, 배열하고 원하는 모양의 전극을 형성하여 나노재료 및 나노소자의 온도변화 및 전기적 특성 측정 등이 가능하다. 이러한 기술은 Ag, Sn, Cu 등 nano-cluster의 percolation 소자, SiN 및 Graphene 나노기공 소자, SiGe, BiTe, Si, ZnO 나노선 및 CNT의 내부구조변화, 상변화 등 다양한 나노재료/나노소자의 나노현상 관찰 및 해석에 적용되었다.

  • PDF

A New All-optical Flip-flop Based on Absorption Nulls of an Injection-locked FP-LD

  • Lee, Hyuek Jae
    • Current Optics and Photonics
    • /
    • 제4권5호
    • /
    • pp.405-410
    • /
    • 2020
  • A new all-optical flip-flop (AOFF) method based on the absorption nulls of an injection-locked Fabry-Perot laser diode (FP-LD) in transverse magnetic (TM) mode is proposed and experimentally demonstrated. For the set and reset operations of the AOFF, injection locking and the destructive minus of beating in transverse electric (TE) mode are used. The absorption nulls on the TM mode are modulated according to the operations, and then non-inverted (Q) and inverted (${\bar{Q}}$) outputs can be obtained simultaneously. Thanks to the use of several absorption nulls, the proposed AOFF can achieve multiple outputs with extinction ratios of more than 15 dB. Even though the experiment is demonstrated at 100 Mbit/s, the results of previous experiments using the injection of a CW holding beam imply that the operation speed can increase to 10 Gbit/s.

강재의 기계 가공성에 미치는 야금학적 인자

  • 손유홍
    • 기계저널
    • /
    • 제28권6호
    • /
    • pp.547-555
    • /
    • 1988
  • 강재의 기계 가공성(피삭성 : machinability)에 영향을 미치는 요인은 많다. 그러나 가장 큰 요 인은 치금학적 인자로서 그 중에서도 화학성분, 열처리 조직 및 냉간 가공 등이다. 화학성분은 재료의 기계적 성질(강도, 인성), 열처리 조직, 개재물 종류 및 공구재와의 친화성 등에 영향을 크게 미친다. 이러한 치금학적 인자도 재료의 가공방법 및 가공성 평가 기준에 따라 정 또는 부의 효과를 나타낸다. 바꿔 말하면 아무리 어려운 가공 작업이라도 모든 요인을 고려한다면 최적의 조건을 얻을 수 있다고 할 수 있다. 앞으로의 기계 가공성 개선 연구 방향으로는 재료의 특성을 해치지 않고 기계 가공성을 개선시키는 것과 특수원소 첨가(Te, Se, Bi 등)에 의한 기계 가공성 향상 및 난삭 재료인 고경도 강재, 고 Mn 강, 스테인리스계 및 초내열 합금 등의 기계 가공성 개선이 될 것이라고 판단된다.

  • PDF

Peltier module의 구조적 안정성 확보에 관한 연구 (Study on the Peltier Module to Insure the Structural Stability)

  • 전종훈;김재정;김인관;김영수
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2006년도 하계학술발표대회 논문집
    • /
    • pp.1144-1149
    • /
    • 2006
  • Electric power is generated by Seeback Effect if there is thermal difference in pettier module. Peltier module is composed by alumina, Bi-Te semiconductor and insulation (or air). If load is increased in pettier module, the alumina of module will be destroyed. One of the preventing method of module destruction is using damper between module and heat source. But the electric Power is dropped because of decrease of thermal difference, if thermal conductivity of damper was tourer than other thermoelectric materials. We design, Polymer Pad for enhancing thermoelectric porter. As the result of these experiment, Polymer Pad is more superior than the Rubber in the stability and thermal conduction.

  • PDF

4.7T 고자장 초전도 자석에서 Tailored RF를 이용한 고양이 뇌의 자화율 강조영상법에 의한 자기공명혈관 조영술 (Susceptibility-Contrast-Enhanced MR Venography of Cat Brain Using Tailored RF Pulse at High Magnetic Field of 4.7 Tesla Superconducting Magnet)

  • 문치웅;김상태;이대근;임태환;노용만;조장희;이윤
    • 한국의학물리학회지:의학물리
    • /
    • 제5권1호
    • /
    • pp.55-66
    • /
    • 1994
  • 4.7T의 고자장 자기공명 영상(Magnetic Resonance imaging : MRI) 장치에서 Tailored RF 경사자계반향(Tailored RF Gradient-Echo : TRGE)기법을 이용하여 phantom 영상과 고양이 뇌의 정맥혈관 영상을 얻었다. 증류수에 MgCl$_2$를 섞어 T1을 짧게한 지름 6cm의 원통형 phantom으로 TRGE기법에 대한 검증을 먼저 하였다. 이후 halothane으로 전신 마취된 몸무게 3.0~4.0kg의 고양이 뇌로부터 얻은 시단면(sagittal slice) 영상에서 Dorsal sagittal sinus, Straight sinus, Vein of corpus callosum과 Internal cerebral vein등의 혈관이 강조되어 나타남을 고양이 뇌의 해부학적 그림과 비교해 보였다. Tailored RF 파형은 ASPECT 3000 computer(스위스 BRUKER사 제품)의 PASCAL 언어를 이용하여 제작하였다. 사각형의 절편모양(slice profile)과 원하는 절편의 두께(slice thickness)에 선택절편내에서 절편방향으로 위상분포가 최대 2$\pi$가 되는 bi-linear ramp 모양을 갖는 절편함수를 공간상에서 Fourier 변환시켜 Tailored RF를 만들었다. TR/TE=205/10 msec, 절편두께 TH=7mm, 화소배열수(matrix size)=256$\times$256, 평면해상도(in-plane resolution)=0.62$\times$0.31mm$^2$, 관심영역 크기(field of view : FOV)=8cm의 영상조건으로 자기공명 TRGE 영상을 얻었다.

  • PDF