• 제목/요약/키워드: BiTe

검색결과 311건 처리시간 0.024초

로터리형 원자층 증착법을 이용한 Bi-Te계 소결체의 열전 성능 개선 (Thermoelectric Performance Enhancement of Sintered Bi-Te Pellets by Rotary-type Atomic Layer Deposition)

  • 정명준;박지영;은수민;최병준
    • 한국분말재료학회지
    • /
    • 제30권2호
    • /
    • pp.130-139
    • /
    • 2023
  • Thermoelectric materials and devices are energy-harvesting devices that can effectively recycle waste heat into electricity. Thermoelectric power generation is widely used in factories, engines, and even in human bodies as they continuously generate heat. However, thermoelectric elements exhibit poor performance and low energy efficiency; research is being conducted to find new materials or improve the thermoelectric performance of existing materials, that is, by ensuring a high figure-of-merit (zT) value. For increasing zT, higher σ (electrical conductivity) and S (Seebeck coefficient) and a lower κ (thermal conductivity) are required. Here, interface engineering by atomic layer deposition (ALD) is used to increase zT of n-type BiTeSe (BTS) thermoelectric powders. ALD of the BTS powders is performed in a rotary-type ALD reactor, and 40 to 100 ALD cycles of ZnO thin films are conducted at 100℃. The physical and chemical properties and thermoelectric performance of the ALD-coated BTS powders and pellets are characterized. It is revealed that electrical conductivity and thermal conductivity are decoupled, and thus, zT of ALD-coated BTS pellets is increased by more than 60% compared to that of the uncoated BTS pellets. This result can be utilized in a novel method for improving the thermoelectric efficiency in materials processing.

한국(韓國) 남서부(南西部)의 덕음(德蔭)과 전주(全州)-금은광상(金銀鑛床)에 대(對)한 암석지구화학적(岩石地球化學的) 연구(硏究) (Lithogeochemistry on the Dukum and Jeonjuil gold - silver deposits in Southern - western part of Korea)

  • 윤정한;전용원;전효택
    • 자원환경지질
    • /
    • 제21권4호
    • /
    • pp.389-400
    • /
    • 1988
  • Minor elements such as Ag, As, Au, Bi, Cd, Cu, Co, Ni, Pb, Rb, Sb, Sr and Te were analyzed by atomic absorption spectrophotometry and induced coupled plasma spectrophotometry in order to investigate pathfinders for gold in quartz porphyry, granite porphyry and vein materials in Jeonjuil gold - silver mine, and in altered biotite granites and vein materials in Dukum gold - silver mine. In Dukum gold - silver mine, it is observed that Au contents have positive relation with As, Co, and Rb contents, but negative relation with Bi contents in altered biotite granites. Au contents have positive relation with Ag, As, Co and Te contents in vein materials. In Jeonjuil gold - silver mine, it is observed that Cd, Rb, Sr and Te are enriched near ore vein in quartz porphyry and granite porphyry. Au contents have positive relation with As, Cd, Cu, $Fe_2O_3$ and $K_2O$ in vein materials.

  • PDF

열전소자를 이용한 히트펌푸에 관한 연구 (A study of thermoelectric Heat Pump device)

  • 박창엽
    • 대한전자공학회논문지
    • /
    • 제5권1호
    • /
    • pp.6-12
    • /
    • 1968
  • 이 연구는 열전장치에서 펠티어 효과를 이용한 전기저항 , , 열주전력 , , 열전달도 , 인 BiTe의 n형소자 및 P형소자로 구성된 열전장치를 만들어 열전냉각 및 열전가열시험을 하였다. 진공속에서 고온부에 대한 저온부의 온도를 측정한 결과 42 degree C의 차가 되었다.

  • PDF

열전 박막의 표면형상 개선을 위한 Sapphire기판의 표면처리

  • 권성도;김광천;최지환;김진상
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 춘계학술대회 논문집
    • /
    • pp.9-11
    • /
    • 2009
  • 열전박막은 유비쿼터스 센서 네트워크에서 사용될 초소형 자가발전 장치로 각광받고 있다. 본 실험에서 는 상온에서 주로 사용되는 $BiSbTe_3$ 열전물질을 유기 금속화학 증착법(MOCVD)을 이용하여 (0001) Sapphire기판 위에 성장하였다. 일반적으로 사용되는 기판의 세척 및 에칭과정을 거쳐 성장된 $BiSbTe_3$ 박막의 표면형상은 부분적으로 성장되지 않으며 불규칙한 결정립을 포함하는 박막의 형상을 나타내었으나 성장 전 기판의 표면처리 통하여 성장된 박막의 표면 형상을 크게 개선시킬 수 있었다. 이는 표면처리를 통하여 기판표면에 미세 결함을 형성 시켜 초기 박막성장 시 핵생성이 용이하도록 하였기 때문으로 해석되었다. 이러한 표면 처리기법은 성장된 박막의 열전 특성에 크게 영향을 끼치지 않았다. 따라서 다양하고 저가의 박막형 열전소자의 제작에 응용될 수 있을 것으로 기대된다.

  • PDF

열전모듈을 이용한 발전기의 패키징 (The Packaging Technology Thermoelectric Generator)

  • 한경목;황창원;백동규;최승철
    • 마이크로전자및패키징학회지
    • /
    • 제7권3호
    • /
    • pp.1-6
    • /
    • 2000
  • 폐수의 온도차등의 폐열 에너지를 이용한 에너지 절약 시스템으로써 구조가 간단한 소형의 열전 발전기를 개발하였다. 열원으로 끊는 물을 이용하고, Bi-Te 계 열전반도체 모듈 16개를 전기적으로 직렬로 연결하고 패키징하여 열전 변환 시스템을 제작하였다. 열전 발전기의 출력은 온도차가 75 K, 전기저항이 40$\Omega$, 전류가 0.35 A에서 약 4.5 W정도를 얻을 수 있었다.

  • PDF

열전발전용 Bi-Te module에서 미끄럼에 따른 열응력 완화 특성 (A Effect of Fluid-assisted Sliding on Stress Relaxation of Bi-Te Modules in Thermoelectric Generation System)

  • 서창민;우병철
    • 한국해양공학회지
    • /
    • 제14권4호
    • /
    • pp.62-97
    • /
    • 2000
  • Recently the research for utilization of waste heat produced from electric power plants, casting factories, heat treating factories or commercial are being afforded by the need for energy saving. The objective of this study is to develop a thermoelectric generation system which unused energy from close-at-hand sources such as garbage incineration heat and industrial exhaust etc. into electricity. This paper a thermoelectric technology on a optimum system design method and efficiency and cost effective thermoelectric element on order to extract the maximum power output from energy conversion of waste energy. It is shown that the longitudinal stresses of module contacted with two point constrained Al tubes could be released more than those with a one-point constrained.

  • PDF

새로운 소결 방법으로 제조된 n형 $\textrm{Bi}_{2}\textrm{Te}_{2.4}\textrm{Se}_{0.6}$열전재료의 특성 (Thermoelectric Properties of n-type $\textrm{Bi}_{2}\textrm{Te}_{2.4}\textrm{Se}_{0.6}$ Prepared by Novel Sintering Process)

  • 손석호;장경욱;이동희
    • 한국재료학회지
    • /
    • 제7권5호
    • /
    • pp.374-380
    • /
    • 1997
  • 열전재료 분말을 AI관에 진공봉입하고 형틀가입한 후 소결하는 새로운 방법으로 n형 B $i_{2}$T $e_{2.4}$S $e_{0.6}$를 제조하여 소결조건에 따른 소결성과 열전특성을 조사.분석하였다. AI은 소결시 열전재료와 반응하지 않아 보호 용기로 적합하였으며, 평균입도 195$\mu\textrm{m}$의 분말을 사용하여 성형압 280 MPa, 온도 400에서 50$0^{\circ}C$에서 소결할 경우 성능지수는 1.9x $10^{-3}$K였다.다.

  • PDF

열전발전용 Bi-Te Module에서 미끄럼에 따른 열응력 완화 특성 (A Characteristic of Fluid-Assisted Sliding on Stress Relaxation of Bi-Te Modules in Thermoelectric Generation System)

  • 우병철;이희웅
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제52권1호
    • /
    • pp.12-18
    • /
    • 2003
  • Recently the research for utilization of waste heat produced from electric power plants, casting factories, heat treating factories or commercial building are being afforded by the need for energy saving. The objective of this study is to develop a thermoelectric generation system which converts unused energy from close-at-hand sources such as garbage incineration heat and industrial exhaust etc. into electricity. This paper presents a thermoelectric technology on a optimum system design method and efficiency and cost effective thermoelectric element on order to extract the maximum power output from energy conversion of waste energy. It is shown that the longitudinal stresses of module contacted with two point constrained AI tubes could be released more than those with a one-point constrained.

실리콘 열전소자 기술 (Silicon Thermoelectric Device Technology)

  • 장문규
    • 진공이야기
    • /
    • 제1권4호
    • /
    • pp.21-24
    • /
    • 2014
  • Thermolectric devices could convert temperature gradient into electricity (Seebeck effect) and electric power into temperature gradient across the themoelectric element (Peltier effect). $Bi_2Te_3$ has been widely used as thermoelectric material for more than 40 years, due to the superior thermoelctric characteristics. However, Bi and Te materials are predicted to face supply shortage, giving strong necessity for the development of new thermoelctric materials. Based on the theoretical prediction, nanostructure are expected to give dramatic enhnacement of thermoelectirc characteristics by controlling phonon propagation. Thus, silicon, which had been considered as improper material for thermoelectricity, is now being considered as strong cadidate material for thermoelectricity. This review will focus on the nanotechnology applied research activities in silicon as thermoelectric materials.