• 제목/요약/키워드: BiPOLAR

검색결과 74건 처리시간 0.021초

시각적 선호요인 분석을 통한 농촌 소하천 경관평가에 관한 연구 (Landscape Evaluation of Rural Stream based on the Factor Analysis of Visual Preference)

  • 김성근;조우현;임승빈
    • 농촌계획
    • /
    • 제5권1호
    • /
    • pp.35-44
    • /
    • 1999
  • The purpose of this study is to find the bi-polar adjectives for rural stream landscape evaluation by the semantic differential scale and to suggest the major determinants of visual preference in rural stream landscapes. For this, the bi-polar adjectives for rural stream landscape evaluation was found by the method of the reliability test, and the spatial image was analyzed by the factor analysis. The level of visual preference was measured by slide simulation test, and these data were analyzed by the multiple regression. The major findings of this study can be summarized as follows : 1) Of the bi-polar adjectives expressing psychological and physical characteristics, the hi-polar adjectives which demonstrated reliability and consistency run as follows : Bi-polar adjectives expressing psychological characteristics : 'calm-bustling', 'unfamiliar-familiar', 'still-active','depressing-brisk', 'discomfortable-comfortable', 'suppressed-free', 'lifeless-living', 'quiet-noisy', 'unpleasant-pleasant'. Bi-polar adjectives expressing physical characteristics : 'artificial-natural', 'narrow-wide', 'rocky-not rocky', 'desolate-fertile', 'dirty-clean', 'enclosed-open', 'flat-steep', 'not gravelly-gravelly', 'thicketed-not thicketed', 'not weedy-weedy'. 2) Two factors, the harmony and the movement, were derived from the factor analysis for the psychological variables. Three factors, the naturalness, the rock, and the vegetation, were derived from the factor analysis for the physical variables. 3) Rural stream landscape types were classified into four types by the multi-dimensional scaling method. Type III, IV obtained higher rank of visual preference and type I, II obtained lower. 4) For all types, the factors determining the level of visual preference were found to be the harmony, the naturalness, and the vegetation. The visual preference determinants of rural stream landscape need to be considered in improving or restoring the rural stream landscapes.

  • PDF

최소거리가 확장된 극 부호의 연속 제거 리스트 복호 성능 (Performance of Successive-Cancellation List Decoding of Extended-Minimum Distance Polar Codes)

  • 류대현;김재열;김종환;김상효
    • 한국통신학회논문지
    • /
    • 제38C권1호
    • /
    • pp.109-117
    • /
    • 2013
  • 극 부호(polar codes)는 광범위한 이진 입력 이산 무기억 채널(binary input discrete memoryless channel: BI-DMC)에서 채널 용량에 달성하는 것이 이론적으로 증명된 최초의 채널부호이다. 하지만 유한한 길이를 갖는 극 부호는 연속 제거 리스트(successive-cancellation list: SCL) 복호기에서 오류마루(error floor)가 발생하는 문제점이 있다. 선행 연구에 따르면 이 오류마루 현상은 극 부호에 오류 검출 코드(error detection codes) 중 하나인 CRC(Cyclic Redundancy Check) 부호를 연접했을 때 효과적으로 낮출 수 있는 것으로 알려져 있다. 본 논문에서는 외부 부호(outer codes)를 사용하지 않고 극 부호와 RM(Reed-Muller) 부호의 생성 행렬 연관성을 이용하여 기존 극 부호보다 확장된 최소거리를 갖는 극 부호를 제안한다. 그리고 제안된 극 부호와 CRC 부호를 연접한 극 부호의 성능을 비교한다.

유한한 길이에서 성능이 향상된 BP 극 복호기 (Enhanced Belief Propagation Polar Decoder for Finite Lengths)

  • 이크발 샤질;최광석
    • 디지털산업정보학회논문지
    • /
    • 제11권3호
    • /
    • pp.45-51
    • /
    • 2015
  • In this paper, we discuss the belief propagation decoding algorithm for polar codes. The performance of Polar codes for shorter lengths is not satisfactory. Motivated by this, we propose a novel technique to improve its performance at short lengths. We showed that the probability of messages passed along the factor graph of polar codes, can be increased by multiplying the current message of nodes with their previous message. This is like a feedback path in which the present signal is updated by multiplying with its previous signal. Thus the experimental results show that performance of belief propagation polar decoder can be improved using this proposed technique. Simulation results in binary-input additive white Gaussian noise channel (BI-AWGNC) show that the proposed belief propagation polar decoder can provide significant gain of 2 dB over the original belief propagation polar decoder with code rate 0.5 and code length 128 at the bit error rate (BER) of $10^{-4}$.

Preparation of bi-polar membranes and their application to hypochlorite production

  • Kim, Jung Sik;Cho, Eun Hye;Rhim, Ji Won;Park, Chan Jong;Park, Soo-Gil
    • Membrane and Water Treatment
    • /
    • 제6권1호
    • /
    • pp.27-42
    • /
    • 2015
  • In this study, poly (phenylene oxide) (PPO) and poysulfone (PSf) were sulfonated and aminated respectively. Both sulfonated poly (phenylene oxide) (SPPO) and aminated polysulfone (APSf) were characterized via the measurement of FT-IR, swelling degree, ion exchange capacity (IEC), and ion conductivity. Then the surfaces of these membranes were modified by surface fluorination using 2000 ppm $F_2$ gas against $N_2$ gas for 1 h at room temperature. The surface fluorinated SPPO and APSf membranes were characterized again to determine any differences between the pristine and fluorinated membranes. In total, 3 types of bi-polar membranes were prepared by varying the IEC of the APSf and having a fixed value for the IEC of the SPPO. The hypochlorite concentration generated by using the surface fluorinated membranes was dependent on the IEC of the APSf and ranged from 683 to 826 ppm, while there was a considerable improvement in the durability of the surface fluorinated membranes as they remained intact even after operating for 4 h.

Observations of Pulsed Bi-polar Discharges in Saline Solutions with Pin to Plate Electrodes

  • Shin, Bhum Jae;Seo, Jeong-Hyun;Collins, George J.
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권5호
    • /
    • pp.2011-2016
    • /
    • 2018
  • In this study, we have been investigated pin to plate pulsed bi-polar discharges in saline solutions, where bubble generation occurs. We integrate basic I-V-t electrical characteristics with the ICCD shadowgraph images, and finally instant and time averaged I-V waveforms. We observed that the bubble formation phase dynamics is quite different corresponding to the polarity applied to the pin electrode. When the pin electrode is a cathode, the bubble tends to be periodically detached from the pin electrode and the numerous tiny voltage spikes occur related to the electron emission from a pin cathode casing via, we judge from, direct dissociation of water molecules by energetic electrons. On the contrary, the bubble tends to stick to the pin electrode, when the pin electrode is anode; the bubble grows in size throughout the pulse duration. The dynamic electrical characteristics relative to the applied polarity of a pin electrode are presented and discussed by analysis of time averaged I-V waveforms.

양극 전원형 형조 방전 가공기 설계 및 구현 (Design and Implementation of Bi-polar Power Supplied Die-sinking Electrical Discharge Machine)

  • 정원근;이건기
    • 한국정보통신학회논문지
    • /
    • 제9권1호
    • /
    • pp.134-139
    • /
    • 2005
  • 본 논문은 양극 형조 방전 가공기를 제작하고 그 성능을 평가하였다. 설계 구현된 형조 방전 가공기는 극간 전압 제어기 설계와 서보 모터 제어기 설계 두 부분으로 이루어져 있고, 시뮬레이션을 통해 검증하고 제작하였다. 구현된 방전 가공기의 성능을 기존의 방전 가공기와 가공속도와 가공 표면의 거칠기를 비교 평가하였다. 연구의 결과로는 설계된 가공기가 가공속도와 면조도에서 개선된 결과를 얻었다.

반도체 스위치를 이용한 양방향 고압 펄스 발생기 (Bi-polar High-voltage Pulse Generator Using Semiconductor switches)

  • 김종현;류명효;정인화;;김종수;임근희
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
    • /
    • pp.291-293
    • /
    • 2003
  • A semiconductor switch-based fast hi-polar high voltage pulse generator is proposed in this paper The proposed pulse system is made of a thyristor based-rectifier, DC link capacitor, a push-pull resonant inverter, a high voltage transformer. secondary capacitor, a high voltage IGBT & diode stacks, and a variable capacitor. The proposed system makes hi-polar high voltage sinusoidal waveform using resonance between leakage inductance of the transformer and secondary capacitor and transfers energy to output load at maximum of the secondary capacitor voltage. Compared to previous hi-polar high voltage pulse power supply using nonlinear transmission line, the proposed pulse power system using only semiconductor switches has simple structure and gives high efficiency

  • PDF

THE BIPOLAR SMOULDER PROSTHESIS LONGER TERM RESULTS (5-10 YEARS) IN THE MANAGEMENT OF PRIMARY GLENOHUMERAL OSTEOARTHRITIS

  • M.B.B.S Prue Keith;Worland Richard L.
    • 대한견주관절학회:학술대회논문집
    • /
    • 대한견주관절학회 2002년도 아시아견관절학술대회
    • /
    • pp.125-134
    • /
    • 2002
  • This is a prospective study in which we evaluate the 5-10 year results of BiPolar shoulder arthroplasty in 64 patients (71 shoulders) with primary glenohumeral osteoarthritis. Fifty two patients (56 shoulders) were followed for greater than 60 months (average 79months)1 and no patients were lost to follow Lip. The average age of the patient at operation was 72.5 years. The UCLA score increased from 10.8 preoperatively to 25,7 postoperatively. The final Constant score in this elderly subset of patients averaged $65\%$ (unadjusted). Eighty seven percent of patients were satisfied with their final result. Excellent pain relief was achieved with a VAS of 2.5 (0=no pain, 15=excruciating pain). Active anterior forward flexion improved from $45^{\circ}$ to $104^{\circ}$. Seventy five percent of patients reveal persisting head-shell motion at an average of 7 years. There were two reoperations because of humeral stem loosening; both stems should have been cemented at the initial arthroplasty. It is demonstrated that BiPolar shoulder arthroplasty is durable over time, with clinical results equivalent to that in the literature when compared with hemiarthroplasty and total shoulder replacement.

  • PDF

바이폴라막 제조를 위한 폴리에테르이미드의 아민화 합성 및 표면불소화를 통한 차아염소산 생성 (Synthesis of Aminated Poly(ether imide) for the Preparation of Bi-polar Membranes and Their Application to Hypochlorite Production through the Surface Direct Fluorination)

  • 김정식;강수연;임지원;박수길
    • 폴리머
    • /
    • 제39권2호
    • /
    • pp.338-345
    • /
    • 2015
  • 폴리페닐렌옥사이드(PPO)와 폴리에테르이미드(PEI)에 대해 각각 설폰화(SPPO) 및 아민화(APEI) 반응이 이루어졌다. SPPO와 APEI의 특성평가를 위하여 FTIR, 열무게분석(TGA), 팽윤도, 이온교환용량(IEC) 및 이온전도도 등에 대한 측정을 하였다. 표면불소화를 실시한 후 표면불소화된 SPPO와 APEI 막과 불소화하지 않은 막과의 차이점을 알아보기 위하여 위에서 실시한 특성평가를 다시 수행하여 비교하였다. SPPO막의 이온교환용량을 고정시킨 후 APEI의 이온교환용량을 변경하면서 전체적으로 3개 유형의 바이폴라막을 제조하였고, 이를 차염소산 발생을 위하여 여러 전류밀도 하에서 저농도 및 고농도 소금용액에 적용하였다. 표면불소화된 막의 차염소산 생성 농도는 APEI의 이온교환용량에 의존하며 $80mA/m^2$에서 차염소산 농도 491-692 ppm의 결과를 얻었으며, $5mA/m^2$에서 18-28 ppm의 차염소산 농도를 나타내었으며 내구성이 매우 상승된 것을 보여 주었다.