• Journal of Microbiology
• /
• 제40권1호
• /
• pp.33-37
• /
• 2002

An enzymatic reaction for the production of D-alanine from D-aspartic acid and pyruvate as substrates by a thermostable D-amino acid aminotransferase (D-AAT) was investigated at various conditions In the temperature range of 40-70$\^{C}$ and pH range of 6.0-9.5. The D-AAT was produced with recombinant E. coli BL21, which hosted the chimeric plasmid pTLK2 harboring the D-AAT from the novel thermophilic Bacillus sp. LK-2. The enzyme reaction was shown to follow the Ping Pong Bi Bi mechanism. The K$\_$m/ values for D-aspartic acid and pyruvate were 4.38 mar and 0.72 mM, respectively. It was observed that competitive inhibition by D-alanine, the product of this reaction, was evident with the inhibition constant K$\_$i/ value of 0.1 mM. A unique feature of this reaction scheme is that the decorboxylation of oxaloacetic acid, one of the products, spontaneously produces pyruvate. Therefore, only a catalytic amount of pyruvate is necessary for the enzyme conversion reaction to proceed. A typical time-course kinetic study skewed that D-alanine up to 88 mM could be produced from 100 mM of D-aspartic acid with a molar yield of 1.0.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.22-27
• /
• 1993

we prepared 70K new BiPbAgSrCaCuO superconductor used diffusion of dual layer which composed of SrCaCuO and BiPbAgCuO compound. This method is used permeation and diffusion on partial melting point of BiPbAgCuO compound. Samples were analyzed by means of X-ray diffraction analysis, Thermal analysis, critical temperature and scanning electron microscopy. It was found that the best results were obtained for spread volume (A:B=1:0.6) and sintring time 210hours.

• 한국세라믹학회지
• /
• 제35권5호
• /
• pp.499-504
• /
• 1998

Pechini 방법으로 98.0 mol% ZnO, 1.0mol% $Bi_2O_3$, 0.5mol% CaO, 그리고 0.5mol% $MnO_2$ 조성의 ZnO 바리스터를 제조하여 소결거동과 전기적 특성을 관찰하였다. Pechini 방법으로 제조된 ZnO 바리스터 분말은 평균 입자크기가 $1.5\mu$m 정도이며 좁은 입도 분포를 보였다. $1100^{\circ}C$의 소결온도에서 전형적인 액상소결 과정에서 나타나는 입자성장 거동을 보였으며, 균일한 입자크기와 입계를 따라 Bi가 풍부한 액상이 고르게 분포된ZnO 바리스터를 제조할 수 있었다. 본 실험에서 비직선계수는 40~60 정도의 비교적 높은 값을 보였으며, 항복전압의 역수는 입자크기에 거의 비례하였다. 이것은 Pechini 방법으로 제조한 ZnO 바리스터가 균일한 입자크기와 균일한 액상의 분포를 갖는 바람직한 미세구조를 갖는 것을 보여 주는 것으로, Pechini 방법을 이용함으로서 ZnO 바리스터의 미세구조를 효과적으로 조절할 수 있으므로, 그 전기적 특성의 제어가 가능할 것으로 사료된다.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.486-490
• /
• 2012

$La_{7.33}Bi_2(SiO_4)_6O_2$ specimens were fabricated by standard solid-state synthesis route for solid oxide electrolytes. The calcined powders exhibited uniform particles with a mean particle size of about $28{\mu}m$. The room-temperature structure of $La_{7.33}Bi_2(SiO_4)_6O_2$ specimens was analyzed as hexagonal, space group P63 or P63/m, and the unit cell volume increased with increase a sintering temperature. The specimens sintered at $1,175^{\circ}C$ showed X-ray patterns of homogeneous apatite single phase without the second phase such as $La_2Si_2O_7$ and $La_2SiO_5$. The specimen sintered at $1,175^{\circ}C$ showed the maximum sintered density of 5.49 $g/cm^3$. Increasing the sintering temperature, total conductivities increased, activation energy decreased and the values were $1.98{\times}10^{-5}Scm-1$ and 1.23 eV, respectively.

• 한국세라믹학회지
• /
• 제32권11호
• /
• pp.1269-1275
• /
• 1995

Effects of GeO2 addition on the thermal and structural stabilities of PbO-Bi2O3-Ga2O3 glasses were studied. Thermal stabilities, as assessed by the weighted thermal stability factors [(Tx-Tg)/Tg], increased with GeO2 concentraton from 0.097 to 0.210 with the addition of 20 mol% GeO2. Increasing GeO2 content resulted in the decrease of apparent density, molar volume, refractive index and thermal expansion. On the other hand, IR transmission cut-off (λT=50%) moved from 6.73${\mu}{\textrm}{m}$ for the ternary PbO-Bi2O3-Ga2O3 glass to shorter wavelength side, 5.98${\mu}{\textrm}{m}$ for a glass containing 20mol% GeO2. There were little change with GeO2 content, however, in the activation energies for the viscous flow of approximately 140 kcal/mole within the temperature interval of 300~50$0^{\circ}C$. Addition of GeO2 to PbO-Bi2O3-Ga2O3 glasses enhanced the thermal and structural stabilities significantly at the expense of their infrared transmittance. An appropriate compsomise between these two opposite trends should be made following the specifications of the final applications.

• 한국세라믹학회지
• /
• 제34권10호
• /
• pp.1083-1091
• /
• 1997

반응성이 좋은 미분말의 고온 초전도상을 얻고자 액상 합성법 중의 하나인 옥살산염법을 이용하였다. 본 방법을 사용하여 합성 분체의 초기 형상과 입도를 제어하였고, 개선된 균일성을 가진 Bi(Pb)-Sr-Ca-Cu-O 초전도 분말을 제조할 수 있었다. 합성된 산화물 초전도체 분말의 특성 및 pellct으로 성형후 열처리한 시편의 미세구조와 전기적특성을 조사하였다. 또한, Tape casting법에 의해 후막을 제작하여 미세구조와 전기적 특성을 관찰하였다. 합성된 분말의 입자 크기는 100~300nm 이하의 구형이었으나 대부분이 1~3 ${\mu}{\textrm}{m}$ 크기로 응집되어 있었다. 84$0^{\circ}C$로 72시간 동안 열처리한 괴상 시편의 임계저항온도는 110K였으며, 열처리한 후막의 임계전류는 각각 0.6A, 1.9A였다.

• 반도체디스플레이기술학회지
• /
• 제6권2호
• /
• pp.11-14
• /
• 2007

For the fabrication of blue color organic light emitting diodes(OLED) with a high performance, 2-TNATA [4,4',4"-tris (2-naphthylphenyl-phenylamino)-triphenylamine] as hole injection material and NPB [N,N'-bis (1-naphthyl) -N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as hole transport material were deposited on the ITO (indium tin oxide)/glass substrate by the vacuum thermal evaporation. After then, blue color emission layer was deposited using TPM-BiP[(4'-Benzoylferphenyl-4-yl)phenyl-methanone-Diethyl(biphenyl-4-ymethyl)phosphonate] and GDI602 as a light emitting organic material. Finally, the two kinds of OLEDs with the structure of $ITO/2-TNATA/NPB/TPM-BiP/Alq_3/LiF/Al and ITO/2-TNATA/NPB/GDI602/Alq_3/LiF/Al$ were prepared by in-situ deposition. The maximum current density and luminance were found to be about $588\;mA/cm^2\;and\;5239\;cd/m^2$ at 12V for the OLED sample with the structure of $ITO/2-TNATA/NPB/TPM-BiP/Alq_3/LiF/Al$. Color coordinate of blue OLED was x=0.18, y=0.18 (at llV) and the maximum current efficiency was 2.82 cd/A (at 6V) with the peak emission wavelength of 440 nm.

• 반도체디스플레이기술학회지
• /
• 제6권2호
• /
• pp.19-23
• /
• 2007

The blue emitting OLEDs using TMP-BiP[(4'-Benzoylferphenyl-4-yl)phenyl-methanone-Diethyl(biphenyl-4-ymethyl) phosphonate] host and DJNBD-1 dopant have been fabricated and characterized. In the device fabrication, 2-TNATA [4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as a hole injection material and NPB [N,N'-bis(1-naphthyl)N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as a hole transport material were deposited on the ITO(indium tin oxide)/glass substrate by vacuum thermal evaporation method. Followed by the deposition, blue color emission layer was deposited using TMP-BiP as a host material and DJNBD-1 as a dopant. Finally, small molecule OLEDs with structure of $ITO/2-TNATA/NPB/TMP-BiP:DJNBD-l/Alq_3/LiF/Al$ were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. The effect of dopant into host material of the blue OLEDs was studied. The blue OLEDs with DJNBD-1 dopant showed that the maximum current and luminance were found to be about 34 mA and $8110\;cd/m^2$ at 11 V, respectively. In addition, the color coordinate was x=0.17, y=0.17 in CIE color chart, and the peak emission wavelength was 440 nm. The maximum current efficiency of 2.15 cd/A at 7 V was obtained in this experiment.

• 전자공학회논문지
• /
• 제51권7호
• /
• pp.111-121
• /
• 2014

본 논문에서는 무선으로 전력을 수신할 뿐만 아니라 송신 할 수 있는 기능을 수행하는 무선 전력 송수신기를 위한 양방향으로 동작하는 DC-DC converter를 제안하였다. 일반적으로 무선 전력 송수신기의 경우 2개의 DC-DC converter와 이로 인한 2개의 외부 인덕터가 필요하지만 제안된 DC-DC converter를 적용하여 1개의 DC-DC converter와 1개의 외부 인덕터로 무선 전력 송수신이 가능하도록 하여 전체 시스템의 크기를 줄였다. 제안된 양방향으로 동작하는 DC-DC converter는 $0.35{\mu}m$ BCDMOS 공정을 이용하여 제작하였으며 무선 전력 수신 상황에서 강압 converter로 동작하여 3W의 출력 상황에서 91%의 효율을 가지며 무선 전력 송신 상황에서는 승압 converter로 동작하여 3W의 출력 상황에서 90%의 효율을 갖는다. 양방향으로 동작하는 DC-DC converter와 효율을 극대화 할 수 있는 제안된 기법들을 적용한 무선 전력 송수신기는 수신 상황에서 81.7%, 송신 상황에서 76.5%의 효율을 갖는다.

• 열처리공학회지
• /
• 제31권3호
• /
• pp.135-142
• /
• 2018

In this study, we have fabricated n-type $Bi_2Te_{2.85}Se_{0.15}$ compounds by different processing routes such as crushing, milling and mixing respectively. Subsequently, the obtained powders were consolidated by spark plasma sintering (SPS). The phase crystallinity of bulk samples were identified using X-ray diffraction technique. Powder morphology and fracture surface of bulk samples were observed using the scanning electron microscopy (SEM). The Seebeck coefficient and electrical conductivity values were significantly increased for the milling sample than crushing and mixing samples. As a result, the maximum power factor was obtained $2.4mW/mK^2$, which is thrice than that of crushing process. The maximum figure of merit (ZT) of 0.77 was achieved at 400 K for the milling sample. Furthermore, relatively high hardness and density values were noticed for the different processed samples.