• Title/Summary/Keyword: BiM

Search Result 1,184, Processing Time 0.028 seconds

Geotechnical Engineering Progress with the Incheon Bridge Project

  • Cho, Sung-Min
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2009.09a
    • /
    • pp.133-144
    • /
    • 2009
  • Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

  • PDF

A Study on the Fiber-Optic Voltage Sensor Using EMO-BSO (EOM-BSO 소자를 이용한 광전압센서에 관한 연구)

  • Kim, Yo-Hee;Lee, Dai-Young
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.27 no.11
    • /
    • pp.119-125
    • /
    • 1990
  • This paper describes fiber optic voltage sensor using EOM-BSO (Electro-Optic Modulator-Bismuth Silicon Oxcide). Transceiver has an electical/optical converter and an optical/electrical converter which consist of light emitting diode, PIN-PD, and electronic circuits. Multimode fiber cable of $100/140{\mu}m$ core/clad diameter is used for connecting the transceiver to fiber cable and fiber optic voltage sensor. Before our experiments, by applying the Maxwell equations and wave equations, We derive matrix equation on wave propagation in the BSO single crystal. And also we derive optimal equation on intensity modulation arising through an analyzer. According to experi-mental results, fiber optic voltage sensor has maximum $2.5{\%}$ error within the applied AC voltage of 800V. As the applied voltage increases, saturation values of voltage sensor also increase. This phenomenon is caused by optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optic voltage sensor in the temperature range from$-20^{\circ}C\to\60^{\circ}C$ are measured within ${\pm}0.6{\%}$. And frequency characteristics of the voltage sensor has good frequency characteristics from DC to 100kHz.

  • PDF

NO Reduction Performance of V2O5-WO3/TiO2 Catalyst Supported on a Ceramic Sheet Filter (세라믹 시트 필터에 부착된 V2O5-WO3/TiO2 촉매의 NO 환원 성능)

  • Choi, Joo Hong
    • Clean Technology
    • /
    • v.24 no.1
    • /
    • pp.27-34
    • /
    • 2018
  • Catalytic filter has many advantages for the industrial application owing to its bi-functional ability to treat nitrogen oxides and particulate simultaneously. The technical feasibility of using the catalytic filter in the flue gas treatment process will be more promoted if the high porous ceramic sheet filter is utilized. However, it is not easy to prepare the effective catalytic filter using sheet filter as it has less room for catalyst support due to its thin layer. In this study, catalytic filter using a domestic ceramic sheet filter element has been prepared and conducted the experimental evaluation for NO reduction performance. The current sheet filter element shows the low catalytic activity less than 92% conversion for NO concentration 700 ppm at the face velocity $0.02m\;s^{-1}$. This unexpected low catalytic activity seems to be caused by the present of extraordinary large pores from the lack of uniformity in the pore size distribution of the sheet filter. The large pore size of the sheet filter is reduced by composing the smaller powder as its raw material, which presents improvement in NO conversion more than 96%. More improvement is observed showing 98% NO conversion which is applicable to a commercial plant when the catalyst coating layer is expanded by adding the large $TiO_2$ particles during the catalyst preparation. Both of above two methods is regarded as that the broad gates of the larger pores in the coating layer are effectively filled with the proper catalyst. So these results encourage the utilization of sheet filter as a good catalytic filter material with its potential merit of high permeability.

Correlation between Short Stature and Obese Degree - Intended for the Case of 236 Patient in the Name of Short Stature (저신장과 비만도의 상관성 분석 - 저신장을 주소로 내원한 환아 236명을 대상으로)

  • Lee, Kyung-Hee;Song, Jae-Chul;Lee, Jae-Sung;Kwak, Chang-Kyu;Park, Sun-Young;Han, Seung-Moo;Lim, Sa-Bi-Na;Shin, Hyun-Taeg
    • Journal of Korean Medicine for Obesity Research
    • /
    • v.5 no.1
    • /
    • pp.97-107
    • /
    • 2005
  • Objectives The purpose of this study was to investigate correlation between short stature and obese degree. And we also wanted to know the characteristics of patients visited clinic in the name of 'short stature'. Methods Height, body weight, BMI, fat mass, lean body mass, percent body fat were taken intended for 236 patients in the name of short stature. To all the patient questionnaire for growth clinic was drawn up, and ultrasound scan was taken through calcaneous of the right foot. The patients were classified to three groups - short, average, tall group - according to relative position of mid-parental height. It was analysed that the differences between groups in obese degree. Also was investigated correlation between position of short stature and obese degree, and between obese degree and bony maturity. Results & Conclusion 1. The average ages of patients in the name of 'short stature' were $12.69{\pm}3.93$ years old in boys, $10.66{\pm}3.67$ years old in girls. And it seemed to be just before second rapid maturing period. 2. The average BMI were $20.58{\pm}4.07kg/m^2$ in boys, $18.65{\pm}2.85kg/m^2$ in girls, and average percent body fat were $21.99{\pm}7.35%$ in boys, $26.01{\pm}6.35%$ in girls. 3. The numbers of obese children were 34(31.2%) in boys, 19(14.9%) in girls on the basis of BMI. And the numbers were 39(35.8%) in boys, 53(41.7%) in girls on the basis of percent body fat. There was a big difference in case of girls. 4. The numbers of AG(average group) were 48(44.0%) in boys, 60(47.2%) in girls, the numbers of SG(short group) were 35(32.1%) in boys, 31(24.4%) in girls, and numbers of TG(tall group) were 26(23.9%) in boys, 35(27.6%) in girls. 5. There were no significant differences among the groups in BMI, lean body mass, fat mass, percent body fat. Only significant difference in DI(disease index). 6. There were no significant correlation between PH(percent height) and BMI, leanbody mass, fat mass, percent body fat. Only significant correlation in DI(disease index). 7. There were no significant differences between DA(difference between bone age and chronorogical age) and BMI, leanbody mass, percent body fat. Only significant correlation in fat mass.

  • PDF

Design of 5.8 GHz Patch Array Antenna for FTMS Roadside Equipment (FTMS 기지국용 5.8 GHz 대역 배열 패치 안테나 설계)

  • Kwon, Han-Joon;Lee, Jae-Jun;Lee, Seung-Hwan;Kim, Yong-Deak
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.7 no.4
    • /
    • pp.61-70
    • /
    • 2008
  • This paper designed the antenna for collecting and servicing the traffic information that apply to freeway Traffic Management System, as using DSRC (Dedicated Short Range Communication). Active DSRC is the technology that is using 5.8GHz Radio Frequency to a mean Sequency and there are a lot of the case occurring a physical electric wave shadowing because of the traveling straight of a electric wave. In such inferior communication environment, it constructed the stabilized communication link that can do collecting and servicing the correct traffic information and designed the beam pattern considering the establishment position of the antenna that can apply to various road environments and a communication area. By considering the communication link environment, this paper designed and manufacture the mean frequency of 5.8GHz, the input loss of -17dB in 75MHz bandwidth, the Axial ratio of 1.5:1, and $2{\times}4$ array microstrip antenna which beam pattern have the characteristic of $55^{\circ}$ horizontal half power beam width and $26^{\circ}$elevation half power beam width and the minimum establishment height of the antenna was designed as 14m for avoiding electric wave shadowing on a physical condition between vehicles

  • PDF

Antioxidant and Antibacterial Activities of Extracts from Different Parts of Sophora japonica L. (회화나무 부위별 추출물의 항산화 및 항균활성)

  • Park, Min Jeong;Kim, Hye Soo;Kim, Han Bi;Lee, Sang Gyun;Cho, Soo Jeong
    • Journal of Life Science
    • /
    • v.32 no.10
    • /
    • pp.792-802
    • /
    • 2022
  • In this study, the antioxidant and antibacterial activities of Sophora japonica extracts were investigated to determine the potential of S. japonica as a functional food and medicinal materials. S. japonica was divided into flowers, fruits, and branches, and ethanol extraction was used. The total polyphenol and flavonoid contents were significantly higher in the flower and fruit extracts than in the branch extracts, but the ABTS and DPPH radical scavenging activity and ORAC value were higher in the branch extracts. Among the ethanol extracts of S. japonica, branch extracts showed strong antibacterial activity against Porphyromonas gingivalis, and the MIC was 0.2 mg/ml. Branch extracts showed bacteriostatic activity against P. gingivalis at a concentration of 0.4 mg/ml or less and bactericidal activity at a concentration of 0.6 mg/ml or more. Biofilm biomass production and cell growth of P. gingivalis in the culture medium treated with the branch extract at a concentration of 0.2-2.0 mg/ml were significantly decreased in a concentration-dependent manner. In addition, the mRNA expression of fimA and mfa1 associated with fimbriae formation in these cultures was suppressed in a concentration-dependent manner. Based on these results, S. japonica branch extracts can be used as functional food and medicinal materials, as demonstrated by their antioxidant and antibacterial activities against P. gingivalis and the inhibition of biofilm formation resulting from P. gingivalis.

Repellent Activity of Five Different Plant Extracts Against Aedes albopictus (흰줄숲모기에 대한 5종 식물추출물의 기피효능 평가)

  • Park, Seong Ik;Park, Jeong Ju;Kim, Dan Bi;Moon, Na Young;Shin, Ji Yoon;Cha, Sung Kyung;Kim, Sa Ra;Kim, Jong-Sik;Shon, Dong Cheol
    • Korean journal of applied entomology
    • /
    • v.61 no.2
    • /
    • pp.369-376
    • /
    • 2022
  • Five different methanol extracts of plants were evaluated as a mosquito repellent against Aedes albopictus in nude mice model. The volatile components of plants were analyzed with GC-MS. The effective dose was the highest in Nepeta cataria with 72.9, 83.7, 86.4, and 97.3% efficiencies at 10, 50, 100, and 200 ㎍/mL, respectively. Nepeta cataria, Actinidia polygama, and Artemisia annua extracts were the most effective in duration time test. And there was no difference compared to negative control in the low mosquito repellent efficiency from 30 minutes. As a result of analyzing the volatile components of each plant, a total of 28 components in Mentha suaveolens, 19 components in Actinidia polygama, 27 components in Artemisia annua, 26 components in Nepeta cataria, and 19 components in Taraxacum platycarpum were detected. Especially, nepetalactone known as an effective ingredient of a mosquito repellent was identified (27.95 mg/Kg) in one of volatile components of Nepeta cataria. Overall, our results provide the possibility to develop mosquito repellents material using natural plants which contain various volatile components.

A prospective multicenter clinical study on the efficiency of detachable ball- and spring-retained implant prosthesis

  • Min-Jung Kim;Won-Tak Cho;Su-Hyun Hwang;Ji-Hyeon Bae;Eun-Bin Bae;June-Sung Shim;Jong-Eun Kim;Chang-Mo Jeong;Jung-Bo Huh
    • The Journal of Advanced Prosthodontics
    • /
    • v.15 no.4
    • /
    • pp.202-213
    • /
    • 2023
  • PURPOSE. This prospective clinical study was conducted to evaluate the clinical usefulness of the freely detachable zirconia ball- and spring-retained implant prosthesis (BSRP) through a comparative analysis of screw- and cement-retained implant prosthesis (SCRP). MATERIALS AND METHODS. A multi-center, randomized, prospective clinical study evaluating the clinical usefulness of the detachable zirconia ball- and spring-retained implant prostheses was conducted. Sixty-four implant prostheses in 64 patients were examined. Periodic observational studies were conducted at 0, 3, 6, and 12 months after delivery of the implant prosthesis. Factors such as implant success rate, marginal bone resorption, periodontal pocket depth, plaque and bleeding index, and prosthetic complications were evaluated, respectively. RESULTS. During the 1-year observation period, all implants survived without functional problems and clinical mobility, showing a 100% implant success rate. Marginal bone resorption was significantly higher in the SCRP group than in the BSRP group only at the time of implant prosthesis delivery (P = .043). In all observation periods, periodontal pocket depth was slightly higher in the BSRP group than in the SCRP group, but there was no significant difference (P > .05). The modified plaque index (mPI) scores of both groups were moderate. Higher ratio of a score 2 in modified sulcus bleeding index (mBI) was observed in the BSRP group in the 6- and 12-months observation. CONCLUSION. Within the limitations of this study, the newly developed zirconia ball- and spring-retained implant prosthesis could be considered as an applicable and predictable treatment method along with the existing screw- and cement-retained prosthesis.

Survey of Planting System and Pesticide Spray Method on Apple Orchards in Korea (국내 사과원의 재배형태 및 농약 살포방법 조사)

  • Kwon, Hyeyoung;Hong, Su-Myeong;Kim, Sang-Su;Paik, Min Kyoung;Lee, Hyo Sub;Kim, Dan-Bi;Moon, Byeong-Chul
    • The Korean Journal of Pesticide Science
    • /
    • v.21 no.1
    • /
    • pp.9-16
    • /
    • 2017
  • A survey was conducted to research on planting system and pesticide spray methods including spray volume, sprayer types, and spray nozzles used in apple orchards. The survey was deployed to 395 farmers in 17 cities and towns including 7 regions which are major producers of apple via interview. Major apple varieties were Fuji (79.2%) and Hongro (50.9%) and high density planting system was mainly used in apple orchards (distance between rows: 4.0-4.5 m (73.1%); planting distance: 1.5-3.5 m (88.6%); canopy height: 3.0-4.5 m (88.2%)). The percentages of sprayer types were 77.6% and 22.1% for speed sprayer (airblast sprayer) and power sprayer, respectively. Spray volumes per 10a were 250-300 L in April, the month of spraying the lowest volume, and 300-400 L in June-August, the months of spraying the highest volume. Significant difference in spray volumes were not observed between conventional planting and high density planting, but regional spray volume showed significant difference. The main nozzles used by apple farmers using power sprayers were super jet nozzle (45%), super wide nozzle (26%), and 2-3 vertical head nozzle (25%). The results will helpful to establish practical agrochemicals management policy including suggestion of pesticide spray volume and evaluation of pesticide residue data and efficacy data.

Effect of Lignans from Schisandra chinensis Baillon on Seed Germination in Pepper (오미자 (Schisandra chinensis Baillon)로 부터 추출한 리그난이 고추종자의 발아에 미치는 영향)

  • Shin, Woo-Jung;Lee, You-Jin;Son, Beung-Gu;Kang, Jum-Soon;Lee, Yong-Jae;Park, Young-Hoon;Lee, Young-Geun;Kim, Yong-Cheol;Choi, In-Soo;Kim, Sun-Tae;Choi, Young-Whan
    • Journal of Life Science
    • /
    • v.20 no.3
    • /
    • pp.430-436
    • /
    • 2010
  • In this study, the effects of dibenzocyclooctadiene on seed germination were investigated in pepper. Four $C_{18}$ dibenzocyclooctadiene lignans - schisandrin (1143.7 mg), schisandrin C (317.3 mg), gomisin A (261.4 mg) and gomisin N (213.4 mg) - were isolated from hexane extracts of the fruits of Schisandra chinensis. The molecular structures of the four lignans were elucidated based on spectroscopic analyses including 1D NMR experiments, and bi comparing their spectroscopic data with those of previous literatures. Seeds were immersed in $10^{-5}\;M$ schisandrin, $10^{-6}\;M$ schisandrin C and $10^{-7}\;M$ gomisin A and gomisin N for 1 hr and incubated at $25^{\circ}C$ in the dark for germination. Compared to untreated control, treatment with schisandrin C and gomisin A suppressed seed germination at 48 hrs after incubation, whereas treatment with gomisin N increased germination rate at 48 hrs after incubation. The results of the germination activity of the lignans from S. chinensis confirm their potential plant growth role, and the relative natural abundances of these metabolites suggest their potential use as natural plant growth regulators.