• Korean Journal of Remote Sensing
• /
• v.21 no.6
• /
• pp.445-456
• /
• 2005

The land surface parameters should be determined with sufficient accuracy, because these play an important role in climate change near the ground. As the surface reflectance presents strong anisotropy, off-nadir viewing results a strong dependency of observations on the Sun - target - sensor geometry. They contribute to the random noise which is produced by surface angular effects. The principal objective of the study is to provide a database of accurate surface reflectance eliminated the angular effects from MODIS 250m reflective channel data over Korea. The MODIS (Moderate Resolution Imaging Spectroradiometer) sensor has provided visible and near infrared channel reflectance at 250m resolution on a daily basis. The successive analytic processing steps were firstly performed on a per-pixel basis to remove cloudy pixels. And for the geometric distortion, the correction process were performed by the nearest neighbor resampling using 2nd-order polynomial obtained from the geolocation information of MODIS Data set. In order to correct the surface anisotropy effects, this paper attempted the semiempirical kernel-driven Bi- directional Reflectance Distribution Function(BRDF) model. The algorithm yields an inversion of the kernel-driven model to the angular components, such as viewing zenith angle, solar zenith angle, viewing azimuth angle, solar azimuth angle from reflectance observed by satellite. First we consider sets of the model observations comprised with a 31-day period to perform the BRDF model. In the next step, Nadir view reflectance normalization is carried out through the modification of the angular components, separated by BRDF model for each spectral band and each pixel. Modeled reflectance values show a good agreement with measured reflectance values and their RMSE(Root Mean Square Error) was totally about 0.01(maximum=0.03). Finally, we provide a normalized surface reflectance database consisted of 36 images for 2001 over Korea.

• Journal of Life Science
• /
• v.33 no.12
• /
• pp.1052-1061
• /
• 2023

This study was carried out to evaluate the effect of fermentation by B. subtilis (BPLE), L. brevis (LPLE), S. cerevisiae (SPLE) and C. militaris (CPLE) on the antioxidant activity of Protaetia brevitarsis larvae fed with mushroom substrates (king oyster mushroom). The total polyphenol content of Protaetia brevitarsis larvae (PLE), BPLE, LPLE, SPLE and CPLE were 58.07±0.67, 83.33±0.98, 79.21±1.32, 61.02±0.87 and 57.90±1.02 mg GAEs/extract g, respectively. The flavonoid contents of the PLE, BPLE, LPLE, SPLE and CPLE were 17.35±1.57, 19.49±0.95, 16.90±1.57, 18.12±0.95 and 16.99±0.95 mg QEs/extract g, respectively. The DPPH radical scavenging activity showed no significant difference between the PLE, BPLE, LPLE, SPLE and CPLE at a concentration of 0.2 mg/ml. However, at a concentration of 0.4 mg/ml or more, the DPPH radical scavenging activity of the BPLE and LPLE was higher than that of the PLE. The reducing power of the BPLE and LPLE was also higher than that of the PLE, and more than twice as high at a concentration of 0.8 mg/ml or more. The ORAC value of the BPLE (79.77±0.82 uM TEs/extract g) was higher than that of the PLE (61.34±0.97 uM TEs/extract g). A WST-1 assay of the RAW 264.7 cells indicated that the PLE, BPLE, LPLE, SPLE and CPLE showed no cytotoxicity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.12
• /
• pp.1752-1760
• /
• 2005

In this experiment, the effects of cage density (CD) and probiotic supplementation (PS) on laying performance, metabolic profile, and egg quality in peak-producing hens were evaluated. After blocking according to the cage location, Lohman layers (n = 180, 46 wks of age) were allocated randomly to two levels of CD (540 vs. 360 $cm^2$/hen) and three levels of PS (0, 0.15, and 0.30%). Probiotic contained Enterococcus faecium culture (10${\times}$10$^9$ cfu/g). Egg production (EP) and feed consumption (FC) were measured daily; egg weight (EW) was measured bi-weekly; BW was measured before and after the experiment; and blood samples were obtained at the end of the experiment. The data were analyzed using two-way ANOVA. Increasing CD decreased FC (125.0 vs. 120.8 g/d, p<0.0001) and FCR (1.93 vs. 1.87, p<0.0001) and did not alter EP, EW, and BW. Increasing level of PS linearly decreased FC (p<0.02) and FCR (p<0.006). Averages were 123.9, 123.2, and 121.6 g/d for FC and 1.91, 1.92, and 1.86 for FCR in hens supplemented with 0, 0.15, and 0.30% probiotic, respectively. Hens placed in high-density cages had greater serum corticosterone concentration than hens placed in normal-density cages (12.8 vs. 11.3 $\mu$g/dL, p<0.04); CD did not affect concentrations of other metabolites. Increasing level of PS linearly increased serum glucose, albumin, and creatine concentrations and quadratically increased total protein, globulin, Ca, and P concentrations. Average concentrations (mg/dL) were 260, 297, and 305 for glucose; 6.28, 8.09, and 7.58 for total protein; 1.98, 2.48, and 2.38 for albumin; 4.30, 5.62, and 5.19 for globulin; 0.40, 0.52, and 0.54 for creatine; 16.0, 16.5, and 16.3 for Ca; and 6.27, 8.14, and 7.17 for P in hens supplemented with 0, 0.15, and 0.30% probiotic, respectively. There was no effect of CD on egg quality. Increasing level of PS linearly improved yolk color (YC) and quadratically increased albumen index (AI) and Haugh unit (HU). The mean values were 9.67, 9.75, and 10.58 for YC; 8.94, 6.93, and 8.72% for AI; and 85.6, 74.9, and 82.9 for HU for hens supplemented with 0, 0.15, and 0.30% probiotic, respectively. There was also CD by PS effect on FC, EP, and serum glucose, total protein, albumin, globulin, creatine, Ca and P concentrations. In conclusion, increased CD partially depressed laying performance and caused stress. Probiotic supplementation improved laying performance and metabolic profile. It also partially alleviated the adverse effects of stress resulting from increased caging density.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.179-197
• /
• 2020

Topographic normalization reduces the terrain effects on reflectance by adjusting the brightness values of the image pixels to be equal if the pixels cover the same land-cover. Topographic effects are induced by the imaging conditions and tend to be large in high mountainousregions. Therefore, image analysis on mountainous terrain such as estimation of wildfire damage assessment requires appropriate topographic normalization techniques to yield accurate image processing results. However, most of the previous studies focused on the evaluation of topographic normalization on satellite images with moderate-low spatial resolution. Thus, the alleviation of topographic effects on multi-temporal high-resolution images was not dealt enough. In this study, the evaluation of terrain normalization was performed for each band to select the optimal technical combinations for rapid and accurate wildfire damage assessment using PlanetScope images. PlanetScope has considerable potential in the disaster management field as it satisfies the rapid image acquisition by providing the 3 m resolution daily image with global coverage. For comparison of topographic normalization techniques, seven widely used methods were employed on both pre-fire and post-fire images. The analysis on bi-temporal images suggests the optimal combination of techniques which can be applied on images with different land-cover composition. Then, the vegetation index was calculated from the images after the topographic normalization with the proposed method. The wildfire damage detection results were obtained by thresholding the index and showed improvementsin detection accuracy for both object-based and pixel-based image analysis. In addition, the burn severity map was constructed to verify the effects oftopographic correction on a continuous distribution of brightness values.

• Korean Journal of Food Science and Technology
• /
• v.39 no.3
• /
• pp.299-303
• /
• 2007

The objective of this study was the development of immunochromatography (ICG) for the rapid and accurate detection of Listeria monocytogenes. Here, monoclonal antibodies (MAb) were conjugated with 40 nm colloidal gold particles, where the conjugate was used as the detection reagent in the ICG. The ICG was composed of three pads (sample, conjugate, and absorbance pads) and one nitrocellulose membrane. The colloidal gold-MAb conjugate was applied to the conjugate pad, and the test line and control line on the membrane were treated with MAb (FKLM-3BI2-37) and anti-mouse IgG, respectively. The detection limit of the ICG was $10^{5}$ cell/mL and it showed no cross-reaction to food borne pathogens. We inoculated meat and lettuce samples with various counts of L. monocytogenes, and analyzed them by ICG. All the inoculated meat samples gave positive results after enrichment for 24 h in LEB. These results indicate that ICG was able to serve as a primary screening tool for L. monocytogenes in various foods and agricultural products within 20 min after enrichment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.9
• /
• pp.1310-1319
• /
• 2005

This experiment was conducted to determine the effects of cage density (CD) and humate supplementation (HS) on laying performance, metabolic profile, and egg quality during the peak production period in hens. Lohman layers (n = 180, 46 wks of age) were blocked according to the location of cages and then allocated randomly to two levels of CD (4 or 6 hens per cage or 540 vs. 360 $cm^2$/hen) and three levels of HS (0, 0.15, and 0.30%). Egg production (EP) and feed consumption (FC) were measured daily; egg weight was measured bi-weekly; and BW was measured before and after the experiment. Blood and additional egg samples were obtained at the end of the experiment for determination of metabolic profile and egg quality. The data were analyzed using two-way ANOVA as repeated measures. Except for FC, CD did not affect laying performance parameters. Hens placed in high-density cages had lower FC than hens placed in normal-density cages. Increasing HS level linearly increased FC, EP, and feed conversion ratio (FCR). There was a CD by HS interaction effect on FC and EP. Hens placed in high-density cages had greater serum glucose, total protein, albumin, globulin, Ca, and P concentrations and tended to have greater serum corticosterone concentration than hens placed in normaldensity cages. Increasing HS level linearly increased serum glucose, total protein, albumin, globulin, creatine, and Ca concentrations and linearly decreased serum triglyceride and very low-density lipoprotein concentrations. There was a CD by HS interaction effect on serum glucose and albumin concentrations. There were no alterations in egg quality parameters in response to increasing CD. Albumen index and Haugh unit decreased linearly and other egg quality parameters did not change as HS level increased. In conclusion, increased caging density adversely affected metabolic profile, despite insignificantly deteriorating laying performance. Moreover, benefits from humate supplementation seem to be more noteworthy for hens housed in stressing conditions than for hens housed in standard conditions.

• Environmental Analysis Health and Toxicology
• /
• v.28
• /
• pp.7.1-7.9
• /
• 2013

Objectives We investigated the particle mass size distribution and chemical properties of air pollution particulate matter (PM) in the urban area and its capacity to induce cytotoxicity in human bronchial epithelial (BEAS-2B) cells. Methods To characterize the mass size distributions and chemical concentrations associated with urban PM, PM samples were collected by a 10-stage Micro-Orifice Uniform Deposit Impactor close to nearby traffic in an urban area from December 2007 to December 2009. PM samples for in vitro cytotoxicity testing were collected by a mini-volume air sampler with $PM_{10}$ and $PM_{2.5}$ inlets. Results The PM size distributions were bi-modal, peaking at 0.18 to 0.32 and 1.8 to $3.2{\mu}m$. The mass concentrations of the metals in fine particles (0.1 to $1.8{\mu}m$) accounted for 45.6 to 80.4% of the mass concentrations of metals in $PM_{10}$. The mass proportions of fine particles of the pollutants related to traffic emission, lead (80.4%), cadmium (69.0%), and chromium (63.8%) were higher than those of other metals. Iron was the dominant transition metal in the particles, accounting for 64.3% of the $PM_{10}$ mass in all the samples. We observed PM concentration-dependent cytotoxic effects on BEAS-2B cells. Conclusions We found that exposure to $PM_{2.5}$ and $PM_{10}$ from a nearby traffic area induced significant increases in protein expression of inflammatory cytokines (IL-6 and IL-8). The cell death rate and release of cytokines in response to the $PM_{2.5}$ treatment were higher than those with $PM_{10}$. The combined results support the hypothesis that ultrafine particles from vehicular sources can induce inflammatory responses related to environmental respiratory injury.

• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.594-602
• /
• 1998

Titanium hydroxide (TiO({{{{ {OH }_{2 } }})) fine particles were produced by the reverse micelle technique. For the formation of titanium hydroxide (TiO({{{{ {OH }_{2 } }})) particles with the technique reversed micellar solution was prepared by solubilizing water into organic solvent (isooctane) with a surfactant and titanium alkoxide (tetraisopropyl orthotitanate) diluted with isopropyl alcohol was added to the reversed micellar solution. The hdrolyzed species (TiO({{{{ {OH }_{2 } }})) was formed by the hydrolysis of titanium alkoxide and titanium dioxide is then formed by the condensation of the hydrolyzed species. There are several process variables such as surfactants concentration of surface cosurfactant hydrolysis temperature and pH. In this work the ef-fects of process variables on paticle shapes particle size distribution and paticle agglomeration were bi-nodal for an anionic surfactant(AOT) in the whole range of temperature pH and surfactant concentration of this experiment. The addition of ethanol as a cosurfactant resulted in narrow particle size distribution of the experiment. The additiono of ethanol as a cosurfactant resulted in narrow particle size distribution and 0.12${\mu}{\textrm}{m}$ of smaller average particle diameter. FT-IR spectrum of particles shows the absorption peak of Ti-OH bonding and Ti-O bonding. An exothermic peak around 41$0^{\circ}C$ in TGA-DTA curve shows that crys- tallized anatase phase appears and completely transits to anatase around 45$0^{\circ}C$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.119-125
• /
• 1990

This paper describes fiber optic voltage sensor using EOM-BSO (Electro-Optic Modulator-Bismuth Silicon Oxcide). Transceiver has an electical/optical converter and an optical/electrical converter which consist of light emitting diode, PIN-PD, and electronic circuits. Multimode fiber cable of $100/140{\mu}m$ core/clad diameter is used for connecting the transceiver to fiber cable and fiber optic voltage sensor. Before our experiments, by applying the Maxwell equations and wave equations, We derive matrix equation on wave propagation in the BSO single crystal. And also we derive optimal equation on intensity modulation arising through an analyzer. According to experi-mental results, fiber optic voltage sensor has maximum $2.5{\%}$ error within the applied AC voltage of 800V. As the applied voltage increases, saturation values of voltage sensor also increase. This phenomenon is caused by optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optic voltage sensor in the temperature range from$-20^{\circ}C\to\60^{\circ}C$ are measured within ${\pm}0.6{\%}$. And frequency characteristics of the voltage sensor has good frequency characteristics from DC to 100kHz.