• 제목/요약/키워드: Bi2223

검색결과 401건 처리시간 0.029초

열처리 온도 및 분위기 변화에 따른 Bi-2223 초전도 선재에서의 특성변화 (superconducting properties of Bi-2223 tapes with various heat treatment condition)

  • 하동우;이동훈;하홍수;오상수;김홍대;양주생;윤진국;최정규;권영길
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집
    • /
    • pp.527-530
    • /
    • 2002
  • A lot of efforts have been focused on the optimization of PIT parameters for Bi-2223/Ag wire. In this paper, initial annealing of Bi-2223/Ag wire to transform Bi-2212 orthorhombic from Bi-2212 tetragonal Precursor was investigated. This initial annealing step at low oxygen partial pressure were to transform Bi-2212 orthorhombic structure and to reduce the formation of second phases at superconducting wire. However Bi-2223 Phases were appeared at higher annealing temperature. Critical currents(Je) of Bi-2223/Ag tapes were sintered at low oxygen Partial pressure were higher than that of the wires sintered at atmosphere condition. In order to investigate the effect of rolling reduction ratio, Bi-2223/Ag HTS tapes were rolled with different reduction ratio. There were no clear difference of Je and filaments shape with various rolling reduction ratio.

  • PDF

Bi-2223/Ag 선재의 전구 분말에서 수분함량에 따른 효과 (The effects of moisture content in precursor powder for Bi-2223/Ag tape)

  • 김성환;유재무;고재웅;김영국;김철진
    • Progress in Superconductivity
    • /
    • 제4권2호
    • /
    • pp.162-167
    • /
    • 2003
  • The critical current value of Bi-2223/Ag tape can be influenced by various factors. In particular, it was known that properties of precursor powders could affect the formation of Bi -2223 and grain growth rate of the same. Since, moistures and organic matters can easily contaminate the precursor powders of Bi-2223 tapes and degrade properties of superconductors, the precursor powders should be kept in optimal conditions to minimize contamination. In this study, the effect of moisture and organic matters has been investigated. A Bi-2223/Ag tape contaminated with a large amount of moisture and organic matter has been characterized by low critical current values and bubbling. It has been found that as the quantity of moisture increases, the Bi-2223 phases are formed at lower temperature and the amount of non-superconducting phase increases.

  • PDF

열처리 가스유량에 따른 Bi-2223/Ag 초전도 테이프의 특성에 미치는 영향 (The effect of heat treatment mass flow on superconducting property of Bi-2223/Ag Tapes.)

  • 양주생;하동우;이동훈;최정규;황선역;오상수;김상철;김명호
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2003년도 추계학술대회 논문집
    • /
    • pp.96-98
    • /
    • 2003
  • Many of research efforts have been focused on the improvement of critical current density Jc of silver-sheathed Bi-2223 tapes for practical applications of material. Bi-2223 superconducting wires with 55 filaments were fabricated by stacking, drawing process with different heat-treatment histories. After rolling process, Bi-2223 tapes were heat-treatment at 780~826$^{\circ}C$ with variable mass flow rate of mixed gas. In this study, the effect of changes in the variable mass flow rate of mixed gas during the heat treatment of Bi-2223/Ag tapes has been investigated. Distinct differences were observed in the Bi-2223 phase and critical current as flow rate of mixed gas. We could achieve proper conditions of mass flow rate of mixed gas for Ag-alloy clad Bi-2223 superconducting tapes.

  • PDF

조성이 다른 전구체 분말에 따른 Bi-2223/Ag 초전도 테이프의 특성 변화 (Properties of Bi-2223/Ag HTS tapes using different content of precursors)

  • 하동우;양주생;하홍수;오상수;황선역;이동훈;최정규;이언용;권영길
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
    • /
    • pp.69-72
    • /
    • 2003
  • Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor powders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. XRD and DC magnetization analysis were performed in order to investigate the fraction of Bi-2223 phase in Bi-2223/Ag HTS tape. We could achieve best Ic of 70 A class at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process. DC magnetization analysis was useful to investigate the fraction of Bi-2223 phase in the Bi-2223/Ag tape.

  • PDF

기지금속을 달리한 Bi-2223 초전도 선에서의 기계적 특성 변화 (Mechanical properties at Bi-2223 HTS tapes with various sheath materials)

  • 하동우;이동훈;양주생;김상철;황선역;하홍수;오상수
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
    • /
    • pp.551-554
    • /
    • 2004
  • Bi-2223 HTS tapes are used widely for application of superconducting power systems. However there are need the properties of high strength and low AC loss. Two kinds of Bi-2223 HTS tapes with different Ag sheath were used to know the effect of sheath alloying for the strength and the resistivity. The workability and reaction degree of superconducting phase at Bi-2223 HTS tapes were investigated. We designed conventional type-Ag/alloy and double sheathed mono filament type-Ag/alloy/alloy in order to increase the strength and resistivity of matrix in Bi-2223 HTS tapes. The effect of axial strain and thermal cycling on the critical current was investigated for the Bi-2223 HTS tapes. Because the workability of double sheath Bi-2223 HTS tape was lower than one sheath Bi-2223 HTS tape, it was need additional softening treatment. Bi-2223 formation reaction was decreased by Ag alloy matrix during sintering process. Two kinds of Bi-2223/Ag tapes with different Ag sheath were used to know the effect of sheath alloying for the tensile strain. Critical current is drastically decreased for Ag/alloy and Ag/alloy/alloy sheathed tapes at tensile strain above 0.24 % and 0.34 %, respectively. This result showed that mechanical strength was increased over than 40 % by introduce double sheath at mono filament stage.

  • PDF

단상막 형성을 위해 기판온도와 산화 가스압에 따른 Bi-2223 초전도 박막의 생성 영역에 관한 연구 (A Study on Produced Region of Bi-2223 Superconducting Thin Films versus substrate temperature and oxide gas pressures for formation of single-phase Film)

  • 양승호;박용필
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2007년도 춘계종합학술대회
    • /
    • pp.536-539
    • /
    • 2007
  • BSCCO 박막은 다양한 기판온도와 산화 가스압에 변화에서 증발법에 의해 제작되었다. 박막조성을 Bi2212 또는 Bi2223으로 설정했음에도 불구하고, 어느 경우나 Bi2201, Bi2212 및 Bi2223상이 생성되었다. 이들 안정상의 생성 영역은 기판 온도-산화 가스압의 Arrhenius 플롯에서 우측 하단 방향으로 경사진 직선으로 표시되며 매우 좁은 영역에 분포되어 있다. 생성막의 XRD 피크는 기판 온도에 따라 연속적으로 변화했다. 이는 Bi2201, Bi2212, Bi2223의 각상이 결정 구조 내에 혼합되어 있는 혼합 결정계의 존재를 나타내고 있으며, 각 상의 단상막은 매우 좁은 온도, 가스압 범위에서만 생성되었다.

  • PDF

Phase Stability of Bi-2212 and Bi-2223 Thin Films Prepared by IBS Technique

  • Yang, Sung-Ho;Park, Yong-Pil
    • Transactions on Electrical and Electronic Materials
    • /
    • 제2권1호
    • /
    • pp.12-15
    • /
    • 2001
  • Bi-2212 and Bi-2223 thin films are prepared by IBS(ion beam sputtering) technique. Three phases of Bi-2201, Bi-2212 and Bi-2223 appear as stable ones in spite of the conditions for thin film fabrication of Bi-2212 and Bi-2223 compositions, depending on substrate temperature (T $_{sub}$) and ozone pressure(PO$_3$). It is found out that these phases are limited within very narrow temperature.e.

  • PDF

고온 초전도 케이블용 Bi-2223 선재의 기계적 특성 (Mechanical Characteristics of Bi-2223 Wire for High-Tc Superconducting Cable)

  • 백승명;김영석;정순용;김상현
    • 한국전기전자재료학회논문지
    • /
    • 제11권11호
    • /
    • pp.1028-1034
    • /
    • 1998
  • Bi-2223 superconductor is known as one of the candidates for practical superconducting wires. Ag-sheathed Bi-2223 superconducting wires were fabricated using the powder-in-tube(PIT) method. When the 19-filaments wire was immersed in liquid nitrogen(77K), maximum critical current density Jc of 62 A/$mm_2$ at 0T was achieved. The critical current density has been shown to depend on the mechanical properties such as tensile stress and bending strain in Ag-sheathed Bi-2223 superconducting wires. The tensile strain for Jc degradation onset was in the range of 0.12~0.3%. In the case of 19-filaments wire, the bending strain is estimated to be smaller than 0.3% for the reasonable Jc value. The observed degradation of the critical current density due to strain effect is inevitable and can be attributed to the formation of microcracks within the superconducting core.

  • PDF